[TEST] Http transmition and XML processing

sinapseenergia commented 7 years ago

This is an END to END test to be performed.

Stepts - Set tests enviroment //Actual message formats can be checked from VPN Linux terminal available at office local network //As easy as send POST message from terminal to server, and analyze message response format

Conect a linux terminal with an IP visible from Device Network Config. (For instance a Raspberry)

Send XML via HTTP from device to Linux terminal. Check if received as expected (Actual format)
Send XML response via HTTP from Linux Terminal to device. Check if received data is correctly interpreted and stored

ralcaide commented 7 years ago

@sinapseenergia , what should I do related to this issue?

sinapseenergia commented 7 years ago

@ralcaide , tech support if needed

soporteHW commented 7 years ago

Trying to simulate HTTP transmission using Raspberry as server and sending GET request via WIFI device. Results are NOK.

sin titulo

soporteHW commented 7 years ago

Some tests have been performed in local server (using Wireshark and Node-Red application) with successful results.

Today 05/10/2017 two devices have been installed in Domingo's office to check the device operation. Previously, Raul did some test with successful results in both devices.

Sinapse-Energia / MIFARE-US

[TEST] Http transmition and XML processing #22