search

SkyrilHD / Dell-Exx50-Hackintosh

Fully working Hackintosh for all Latitude 2015 models
77 stars 18 forks source link

No bootable device found #11

Closed KenWuqianghao closed 3 years ago

KenWuqianghao commented 3 years ago

I followed the guides completely and when I try to boot the laptop, it tells me "no notable device found"

SkyrilHD commented 3 years ago

After the installation, mount the EFI partition of the installed OS and copy the EFI folder to its partition.

Did you do this?

KenWuqianghao commented 3 years ago

After the installation, mount the EFI partition of the installed OS and copy the EFI folder to its partition.

Did you do this Sorry, I didn't even get to the installation part. I am still trying to boot into full installation

SkyrilHD commented 3 years ago

Check your boot order... Can you boot to the OS with USB?

SkyrilHD commented 3 years ago

Then make sure you placed the EFI correctly

KenWuqianghao commented 3 years ago

Check your boot order... Can you boot to the OS with USB?

My boot order is right, opencore is on the top and I can't boot with USB, I'm still trying to get into installation

SkyrilHD commented 3 years ago

Check this diagram. ESP is the root of the USB Drive. If it still doesn't work, re download the EFI (it may be corrupted) and place it again IMG_20210420_184641_912

KenWuqianghao commented 3 years ago

tbh I don't know what could possibly go wrong. The USB looks very good after following every step of the instruction. Snip20210420_2 Snip20210420_3

SkyrilHD commented 3 years ago

Go to your BIOS: System Configuration > USB Configuration, check if all three options are ticked. Also make sure you set your Boot sequence to UEFI and Secure boot to Disabled. Also try another USB port and boot via F12

KenWuqianghao commented 3 years ago

Configuration

I just checked all of them are already set accordingly.