Closed KenWuqianghao closed 3 years ago
@KenWuqianghao Make sure you formatted the drive as APFS and GUID partition table
@KenWuqianghao Make sure you formatted the drive as APFS and GUID partition table
Not Journal?
@KenWuqianghao Nope
@KenWuqianghao Nope
I formatted again, same thing.
@KenWuqianghao SATA Operation is set to AHCI in BIOS?
@KenWuqianghao SATA Operation is set to AHCI in BIOS?
Yep, AHCI
@KenWuqianghao Without logs I can't say much about it... Check the logs while you are installing. Iirc it was Window > Logs and set to Show all logs
Also it is normal to reboot, but instead of booting into the installer you need to boot to the SSD
@KenWuqianghao Without logs I can't say much about it... Check the logs while you are installing. Iirc it was Window > Logs and set to Show all logs
Also it is normal to reboot, but instead of booting into the installer you need to boot to the SSD
K I will do that. It just kept on restarting and clearing my progress on the installation.
Alright, I found the issue, not a problem of EFI or anything related. Simply done incorrectly.
I aborted my plan to install with a full installer and installed it during the daytime. I was able to boot into installation successfully but during the installation it restarts the laptop during the last 10 or 15 minutes of the installation and reboots into the installation page, meaning I have to restart again. This occurred 3 times already, what should I do?