Hello I am currently having a issue with my installer setup
I managed to make the usb bootable and load into the macos installer but it kept defaulting into Russian, I have gone thru the bios about 3 times and disabled all features/options that the guide ask to, reformatted drive, while ignoring the Russian and go about install macos it gives some error in Russian sadly, I am a US English speaker so I don't know Russian lol.
I also do have a real issue of the mouse buttons won't work, yet the mousepad does move the mouse around I am having to use external mouse to click, this was the case when I was last capable of going into the installer.
I was able to go into the installer until I did this bellow
Currently having issues setting language, I have done nvreset on all attempts I have blanked "prev-lang:kbd" so it would show the language choice and "prev-lang:kbd String en-US:0" and even done
"NVRAM -> Delete -> 7C436110-AB2A-4BBB-A880-FE41995C9F82 -> Item 0 | String | prev-lang:kbd" which doing so booted then hit a gray screen with the mouse being moveable and since then its been booting on this blank screen ever since then and I am not capable of going into installer anymore on my machine
When I was going into the installer, The installer would not change the language, Anything I tried failed.
I am unsure as to why that is.
I have re-flashed bios on machine and re-done bios settings, cleared usb and repartitioned it, redid the plist config. and swaped out from MacBookPro10,1 and MacBookPro9,1 and hasn't done anything it this regard.
Was capable of atleast going into the installer but, Honestly speaking I think this may be a bios issue and as I have stated I have tried re-flashing bios and I have attempted to clear cmos.
how Hp recommends it. hold win + v and power for 3 sec and didn't show a message or anything.
Current Goals
Trying to get macos to boot while its installed on main drive then work on stuff outside of that.
The plist config that I copy and edited will be below, So most stuff I am troubleshooting won't show up on this config
currently using another machine with windows 11 to edit usb etc and also used diskpart to partition usb, using the plist editor Propertree
Using the current GenSMBIOS option 3 and using info for MacBookPro10,1 and MacBookPro9,1
If having Mac OS ignore the gpu is the better answer I am not against the idea
My Hp Elitebook 8570w is on latest Firmware on website
What have I Done?
for Nvidia on Monterey
Kernel > Misc > Security and change SecureBootModel from Default to Disabled
NVRAM > 7C436110-AB2A-4BBB-A880-FE41995C9F82 and change csr-active-config from 00000000 to 02080000
On all attempts and the first time I did this I was capable of going into the installer
And I have written in the Necessary id's in (SystemSerialNumber, MLB, and UUID)
and added in nvreset > add > 7C436110-AB2A-4BBB-A880-FE41995C9F82
key - type - value
prev-lang:kbd - Data - 72752D52 553A3235 32
Exact Details of System.txt
Please Give this a look, This gives info about the hardware and more on bios settings and what I used in plist.config
Looking for any help, I appreciate your time and effort. Very sorry if this causes any inconvenience, I have been working on this for 2 to 3 days and figured it would be best to get some help from people that know the machine better
Edit:
Managed to some how fix the issue but the mouse button's and eithernet
Hello I am currently having a issue with my installer setup
I managed to make the usb bootable and load into the macos installer but it kept defaulting into Russian, I have gone thru the bios about 3 times and disabled all features/options that the guide ask to, reformatted drive, while ignoring the Russian and go about install macos it gives some error in Russian sadly, I am a US English speaker so I don't know Russian lol. I also do have a real issue of the mouse buttons won't work, yet the mousepad does move the mouse around I am having to use external mouse to click, this was the case when I was last capable of going into the installer.
I was able to go into the installer until I did this bellow
Currently having issues setting language, I have done nvreset on all attempts I have blanked "prev-lang:kbd" so it would show the language choice and "prev-lang:kbd String en-US:0" and even done "NVRAM -> Delete -> 7C436110-AB2A-4BBB-A880-FE41995C9F82 -> Item 0 | String | prev-lang:kbd" which doing so booted then hit a gray screen with the mouse being moveable and since then its been booting on this blank screen ever since then and I am not capable of going into installer anymore on my machine
When I was going into the installer, The installer would not change the language, Anything I tried failed. I am unsure as to why that is.
I have re-flashed bios on machine and re-done bios settings, cleared usb and repartitioned it, redid the plist config. and swaped out from MacBookPro10,1 and MacBookPro9,1 and hasn't done anything it this regard. Was capable of atleast going into the installer but, Honestly speaking I think this may be a bios issue and as I have stated I have tried re-flashing bios and I have attempted to clear cmos. how Hp recommends it. hold win + v and power for 3 sec and didn't show a message or anything.
Current Goals Trying to get macos to boot while its installed on main drive then work on stuff outside of that.
The plist config that I copy and edited will be below, So most stuff I am troubleshooting won't show up on this config
currently using another machine with windows 11 to edit usb etc and also used diskpart to partition usb, using the plist editor Propertree
Using the current GenSMBIOS option 3 and using info for MacBookPro10,1 and MacBookPro9,1
If having Mac OS ignore the gpu is the better answer I am not against the idea
My Hp Elitebook 8570w is on latest Firmware on website
What have I Done?
for Nvidia on Monterey Kernel > Misc > Security and change SecureBootModel from Default to Disabled NVRAM > 7C436110-AB2A-4BBB-A880-FE41995C9F82 and change csr-active-config from 00000000 to 02080000 On all attempts and the first time I did this I was capable of going into the installer
And I have written in the Necessary id's in (SystemSerialNumber, MLB, and UUID)
and added in nvreset > add > 7C436110-AB2A-4BBB-A880-FE41995C9F82
key - type - value prev-lang:kbd - Data - 72752D52 553A3235 32
My Config
https://github.com/KemonoElite/Hackintosh-HP-Elitebook-8570w/tree/main/EFI
Info on hardware
https://support.hp.com/ca-en/document/c03414805
Things that have been tried
https://dortania.github.io/OpenCore-Install-Guide/config.plist/ivy-bridge.html#nvram https://dortania.github.io/OpenCore-Install-Guide/troubleshooting/extended/userspace-issues.html#macos-installer-in-russian
More Detailed info
Exact Details of System.txt Please Give this a look, This gives info about the hardware and more on bios settings and what I used in plist.config
Looking for any help, I appreciate your time and effort. Very sorry if this causes any inconvenience, I have been working on this for 2 to 3 days and figured it would be best to get some help from people that know the machine better
Edit: Managed to some how fix the issue but the mouse button's and eithernet