search

Sleeper85 / esphome-jk-bms-can

GNU General Public License v3.0
64 stars 18 forks source link

Instruction=Status=Bulk #56

Open txubelaxu opened 5 days ago

txubelaxu commented 5 days ago

In my opinion, when Instruction is Bulk, but the I=0A, then the status should be "Idle" (or something like that)

image

Sleeper85 commented 5 days ago

Hi,

I have seen your messages as well as the PR. I'm currently busy with another project. I'll look into it and get back to you soon.

shvmm commented 5 days ago

Current being 0 while in Bulk represents a specific situation/mitigation in the charging logic loop. What were the exact conditions that caused this to happen?

Adding a status named Idle is easy but the charging logic depends on the specific states to communicate values to the inverter. Basically, it would complicate things

txubelaxu commented 4 days ago

OK. I undestand.

The conditions were: 2xBMS in a stationary status and no inverter conected to the system.

Many thanks for the info!!

El mié, 3 jul 2024 a las 12:53, Shivam Maurya @.***>) escribió:

Current being 0 while in Bulk represents a specific situation/mitigation in the charging logic loop. What were the exact conditions that caused this to happen?

Adding a status named Idle is easy but the charging logic depends on the specific states to communicate values to the inverter.

— Reply to this email directly, view it on GitHub https://github.com/Sleeper85/esphome-jk-bms-can/issues/56#issuecomment-2205784308, or unsubscribe https://github.com/notifications/unsubscribe-auth/BFHIJMGJPIW4ANWZS57PMIDZKPJ2ZAVCNFSM6AAAAABKJDBTKGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMBVG44DIMZQHA . You are receiving this because you authored the thread.Message ID: @.***>