Smanar / CYD-Domoticz-Remote

WIP project to control your home-automation using Domoticz and a CYD (Cheap touchscreen).
9 stars 2 forks source link

Add support for default_envs = esp32-2432S024C #2

Closed Smanar closed 5 months ago

Smanar commented 6 months ago

######################################################

Pin Reference

######################################################

IO Pins

     0   Digital   Boot Button
     1   Digital   Connector P1 & USB Chip          - TX
     2   Digital   Display                          - TFT_RS / TFT_DC
     3   Digital   Connector P1 & USB Chip          - RX
     4   Digital   RGB LED                          - Red
     5   Digital   SD Card                          - TF_CS [VSPI]
     6   Digital   Not Connected
     7   Digital   Not Connected
     8   Digital   Not Connected
     9   Digital   Not Connected
    10   Digital   Not Connected
    11   Digital   Not Connected
    12   Digital   Display                          - TFT_SDO / TFT_MISO [HSPI]
    13   Digital   Display                          - TFT_SDI / TFT_MOSI [HSPI]
    14   Digital   Display                          - TFT_SCK [HSPI]
    15   Digital   Display                          - TFT_CS [HSPI]
    16   Digital   RGB LED                          - Green
    17   Digital   RGB LED                          - Blue
    18   Digital   SD Card                          - SCK [VSPI]
    19   Digital   SD Card                          - MISO [VSPI]
    21   Digital   Touch, Connector P3 & CN1        - CTP_INT / I2C SDA
    22   Digital   Connector P3 & CN1               - I2C SCL
    23   Digital   SD Card                          - MOSI [VSPI]
    25   Digital   Touch CST920                     - CTP_RST
    26   Analog    Speaker                          - !!!Speaker ONLY! Connected to Amp!!!
    27   Digital   Display                          - TFT_BL (BackLight)
    32   Digital   Touch CST820                     - CTP_SCL
    33   Digital   Touch CST820                     - CTP_SDA
    34   Analog    LDR Light Sensor                 - !!!Input ONLY!!!
    35   Digital   P3 Connector                     - !!!Input ONLY w/ NO pull-ups!!!
    36   Digital   Not Connected
    39   Digital   Not Connected

It use

Smanar commented 5 months ago

This device is supported, in portrait mode.