Members experiencing difficulties getting the SH 2 off the bracket. One member shares: I have carefully put the unlock key under the SH 2 and didn't get a chance the turn the device. And suddenly, without setting too much power I got this brake off the plastic material...
Steps To Reproduce
Place the SH2 on the bracket
Insert the key to remove the SH2 from the bracket
Twist the SH2 to remove
inspect the bracket and see that it is torn
Expected behavior
The bracket should not damage when placing / removing the SH2
Actual behavior
The bracket is damaged
Additional context
Photo's by the Titus Parade
Nico Zwaneveld tried to replicate the issue. Findings:
I did a little experiment locking/unlocking the SH2 numerous times from the mount while the sticker was still in place, and then examining the sticker for friction marks. As you can see in the photo, you can see some friction in the center, and on the edge where there is a spot used during the manufacturing of the mount.
The friction marks on the sticker seem to indicate that it is a very tight fit, possibly the thickness of the sticker is already too much.
Description
Members experiencing difficulties getting the SH 2 off the bracket. One member shares: I have carefully put the unlock key under the SH 2 and didn't get a chance the turn the device. And suddenly, without setting too much power I got this brake off the plastic material...
Steps To Reproduce
Expected behavior
The bracket should not damage when placing / removing the SH2
Actual behavior
The bracket is damaged
Additional context
Photo's by the Titus Parade
Nico Zwaneveld tried to replicate the issue. Findings: I did a little experiment locking/unlocking the SH2 numerous times from the mount while the sticker was still in place, and then examining the sticker for friction marks. As you can see in the photo, you can see some friction in the center, and on the edge where there is a spot used during the manufacturing of the mount.
The friction marks on the sticker seem to indicate that it is a very tight fit, possibly the thickness of the sticker is already too much.
