search

Snapmaker / Luban

An easy-to-use 3-in-1 software tailor-made for Snapmaker machines.
https://snapmaker.com/snapmaker-luban
GNU Affero General Public License v3.0
442 stars 117 forks source link

Feature Request: set if mill should follow the line on the outside or inside in cnc #944

Open EHoglid opened 3 years ago

EHoglid commented 3 years ago

When importing a 2 dimension DXF file it should be great if you can decide if the mill should follow the lines on the outside or inside for each line.

For example. If you want to make a hole in a wooden plate, you want to follow the line on the inside, removing the radius of the CNC bits. If you want to carve out a plate, you want to follow the line on the outside.

jane-rose commented 3 years ago

It's on the way. At this time, the outline for svg is correct.But for dxf, it has some problems.

EHoglid commented 3 years ago

IMG_20210421_125858

Great, because in this case it is important for me that the mill followed the line on the inner side, keeping the dimension correct of the hole, not the cutout circle.

Erik

HorstBaerbel commented 2 years ago

Imo this is an essential function. At the moment the option "Outline" is plain wrong for both DXF and SVGs, if I'm not mistaken. It does a double cut, which totally unnecessary. grafik grafik I've tried milling and it indeed traces the lines shown.

Edit: Attached example files that break. DXF+SVG.zip

Arkktos commented 1 year ago

Any update on this one?

lalilaloe commented 1 year ago

Please fix this asap

Wynand-S commented 1 year ago

It's on the way. At this time, the outline for svg is correct.But for dxf, it has some problems.

It's been 2 years,,,