Th199403
commented
1 year ago Further suggestions:
Show the digital time on the display and it would be great if you could set the time. The time at the artisan is wrong. You can see that in the timestamp of the gcode file.
Add screen saver with adjustable timer.
Add standby mode: Example if you print an object that takes a few hours after the print is finished it goes into a standby mode to save energy.
A shutdown button to shut down the artisan. It's definitely not good in the long run if you constantly take the artisan away from the current.
Housing fan adjustable in 3 stages.
Housing Led lighting dimmable.
I know that the case fan and the lighting can be controlled via code via the console. It would be great if they could implement that.
I miss a display of the time that has already elapsed and the current printing speed in mm/s, which should also be adjustable on the main screen. Printing speed and other parameters can only be changed using the slider, which is very imprecise, since a large value is changed immediately with a minimal distance. It should be possible to do it by entering the numeric keypad, as with nozzle and bed temperature. It should also be possible to switch on the fan and LED light directly via the main display. Going to the options icon first and then scrolling down is far too cumbersome.
and add a default button for print speed, which resets the value to 100%. with the slider it is very imprecise and difficult to hit 100 immediately.