search

Snapmaker / Snapmaker2-Controller

Snapmaker2-Controller is the firmware for Snapmaker 2.0 3-in-1 3D Printers.
GNU General Public License v3.0
128 stars 67 forks source link

Restart Button Feature #80

Open Osatography opened 3 years ago

Osatography commented 3 years ago

Hi Dear Fellow Maker’s,

As I read many other online communities I found out that many other printer users are also looking for a feature which would enhance the quality of 3d printing life. This missing feature in my opinion is adding a Restart Option on the touch screen while printing.

As you know we are only given the option to stop or pause the print. But as a regular occurrence we all need to restart prints. When we go about stopping, all the settings are reset and the bed heat and nozzle heats are gone. This adds like an extra 10 - 15 minutes of process which can be easily avoided with a simple restart functionality which should preserve the current heats. This feature must also give a restart count down to clear up the messed up part that needs replacing like about 10 - 30 seconds. But this could be also made adjustable from the inner settings.

scotthsl commented 3 years ago

@Osatography Sorry for late reply！ And thank you very much for your suggestion! will forward it to production manager!

Thanks Scott