Camera view in LAN mode

[Prutsium]

With the release of 1.6.4 there is still no camera view in LAN mode possible where BS can do this already.

Is this on the roadmap?

[SurgeHawk]

What printer are you using? I have a P1S in LAN mode and the cameras works fine in Orca. Can't print with the P1S because of another issues, but the camera works.

[Prutsium]

X1C with AMS

On Tue, 22 Aug 2023, 19:09 SurgeHawk, @.***> wrote:

What printer are you using? I have a P1S in LAN mode and the cameras works fine in Orca.

— Reply to this email directly, view it on GitHub https://github.com/SoftFever/OrcaSlicer/issues/1879#issuecomment-1688600202, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKH2M53F7I2DTYV5YS2EX6TXWTRUHANCNFSM6AAAAAA32C7QJI . You are receiving this because you authored the thread.Message ID: @.***>

[SoftFever]

can you try 1.6.6?

[Prutsium]

Will download now

[Prutsium]

Not sure what happened here but printer is online and connected (i see temp status and so on) When starting cam 2 errors ... 1: Not supported in LAN 2: Printer not conected :)

[bhast2]

Mine is doing the same thing will not connect to camera and pops up about LAN Mode but I am not using LAN mode. I have stealth mode unchecked in the settings. I don't want to use lan mode. Hope there is a fix soon for this. going to use bambu studio until it is fixed

[fire1ce]

same here. lan-only mode. OrcaSlicer v1.6.6. RTSP steam works fine in other places from the printer.

[SoftFever]

The access code will change everytime we change LAN or WAN mode. What happens when you input the new acess code?

I tested on my P1P, it works fine.

[Qonstrukt]

I have the same issue. I have the RTSP stream working in Home Assistant, but OrcaSlicer can't seem to open it. Trying to open it in another video client at the same time, like VLC, works just fine, with the same access code.

OrcaSlicer v1.6.6 on macOS Sonoma beta (ARM version) BambuLab X1C with AMS

[MotoFreak]

The access code will change everytime we change LAN or WAN mode. What happens when you input the new acess code?

I tested on my P1P, it works fine.

In 1.6.6 I can get a video feed from my P1S but not my X1C and both are in lan only mode.

[STC148]

Here the same, no video connection with my X1C in LAN mode with 1.6.6

[WZ9V]

Another one here, no camera feed from X1C LAN mode on Orca Slicer 1.6.6. Running Linux Mint

[NairoDorian]

Camera Live feed does not work in 1.6.6 with X1 as well, I'm still in 1.5 firmware with the printer though, does this feature need the printer to be updated as well ?

[SoftFever]

It's tough to pinpoint the exact changes BL made in the slicer, closed-source plugin, or the black box printer firmware that might affect the camera feed. Rather than chasing that down, I've updated the BL-related parts based on BS 1.7.4. This update also includes their lidar calibration changes. Could you help verify if everything's working as expected?

You can download the nightly build here: https://github.com/SoftFever/OrcaSlicer/actions/runs/5989893116

[NairoDorian]

@SoftFever Tried your latest build you linked, now I get a warning telling me to upgrade the printer

I'll finish my print and will update the firmware and try that again, will update here once I have results

[MotoFreak]

@SoftFever just downloaded and tested the nightly build portable, P1S and X1C video feed works now, thank you

[STC148]

confirm! works on X1C now. Thank you

[Prutsium]

Unfortunately cant check my printers are 12000km away as i am on business trip in Sydney. If i find time will try to a vpn to home to test.

On Sun, Aug 27, 2023, 14:51 STC148 @.***> wrote:

confirm! works on X1C now. Thank you

— Reply to this email directly, view it on GitHub https://github.com/SoftFever/OrcaSlicer/issues/1879#issuecomment-1694660857, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKH2M56GWCTV3KFYFNGNNCTXXM7FRANCNFSM6AAAAAA32C7QJI . You are receiving this because you authored the thread.Message ID: @.***>

[NairoDorian]

I got an error now I updated and rebooted the printer and activated the Lan Live Video View in the X1 menu

-10 | Certificate error | Check if you are using the official version of Bambu Studio

And this window keeps popping up until I click Cancel, clicking OK makes it disappear and re appear again

[Qonstrukt]

It's tough to pinpoint the exact changes BL made in the slicer, closed-source plugin, or the black box printer firmware that might affect the camera feed. Rather than chasing that down, I've updated the BL-related parts based on BS 1.7.4. This update also includes their lidar calibration changes. Could you help verify if everything's working as expected?

You can download the nightly build here: SoftFever/OrcaSlicer/actions/runs/5989893116

This works perfectly for my on my X1C in LAN mode, thanks 😄

[bani6809]

It's tough to pinpoint the exact changes BL made in the slicer, closed-source plugin, or the black box printer firmware that might affect the camera feed. Rather than chasing that down, I've updated the BL-related parts based on BS 1.7.4. This update also includes their lidar calibration changes. Could you help verify if everything's working as expected?

You can download the nightly build here: https://github.com/SoftFever/OrcaSlicer/actions/runs/5989893116

this seems to have fixed it for me on my x1c

[simonbuehler]

Video stream works for me now with the nightly on the p1p with new firmware, thanks!

[WZ9V]

Camera mode starts but locks up after a few seconds. Orca Slicer 1.8.0 on Linux Mint 21.2 Cinnamon

Same happens in Bambu Studio 1.7.7.89 and 1.8.0 Public Beta

[github-actions[bot]]

Orca bot: this issue is stale because it has been open for 90 days with no activity.

[github-actions[bot]]

Orca bot: This issue was closed because it has been inactive for 7 days since being marked as stale.