Automatic Speed Options...choose to use exact value or percentages

[soundtechscott]

Is your feature request related to a problem? Please describe. A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]

If I want to change a speed for my material, I have to change every single line speed manually but I already know there are simple math values that work for the other parts of my print lets say as an example... if I want to hit a max speed of 100mm/sec I know I can proably go 50-60mm/sec on my first layer with no issues my outer walls might only be 80mm...my inner walls might be the full 100mm my infill will probably be 70-75mm

if my max speed is only 80mm/sec then my first layer is going to be 40-48mm (50%-60%) my outer walls are only going to be 64mm (80%) my inner walls are going to be the full 80mm my infill will be 56-60mm (70-75%)

Which printers will be beneficial to this feature E.g. Voron/Klipper based printer/etc...

all 3d printers

Describe the solution you'd like A clear and concise description of what you want to happen.

Just make speed cells value or % like you have already done for line width

Describe alternatives you've considered A clear and concise description of any alternative solutions or features you've considered.

I currently use an excel sheet to do my calc based on a percentage

Additional context Add any other context or screenshots about the feature request here.

[Tsoukan]

I was looking for this exact feature. Being able to have the speed and acceleration values be calculated as a % of a base value would be fantastic - also a document could be made to help new makers fill in starting % values. This slicer is by far one of the most user friendly and this feature would make it even more so.

[Rufus543]

For me this is one of the last quality of life features that has me tied to Cura. This is a nuisance in Orca, but in Cura, it is a single box.

[github-actions[bot]]

Orca bot: this issue is stale because it has been open for 90 days with no activity.

[soundtechscott]

lets keep this going as it hasnt been added yet and its a big quality of life feature for people that understand how it works

[antonyburden]

100% is the setting I miss most from other slicers. Please consider adding this. Just 1 number to adjust will keep my profiles down to just 1 or 2.

[github-actions[bot]]

Orca bot: this issue is stale because it has been open for 90 days with no activity.

[github-actions[bot]]

Orca bot: This issue was closed because it has been inactive for 7 days since being marked as stale.