Open timberwolfl opened 6 months ago
Tweaking branch diameter seems to help a little. I hope organic tree supports will be getting some updates in the future. Cura seems to have a better (newer?) implementation in the current version. Also hoping for some more exposed parameters for organic tree supports (mabye support interface options, support infill, more diameter options).
Cube Support Issue.zip this happens with the default settings as well which picks organic tree supports by default. 2.0.0 Dev Build as of 2024-03-03
@SoftFever would it be possible to address this before the 2.1 release?
This issue is not prioritized on my side at the moment. I've checked in PrusaSlicer and BambuStudio, and they both have this issue. It seems the bug is in the very upstream implementation (PrusaSlicer). I managed to mitigate/remove this issue by playing around with tree support parameters; you can also give it a try.
Orca bot: this issue is stale because it has been open for 90 days with no activity.
still relevant
Is there an existing issue for this problem?
OrcaSlicer Version
1.9.1
Operating System (OS)
Windows
OS Version
Windows 10
Additional system information
No response
Printer
Sovol SV07
How to reproduce
Enable Support Support Type: Tree(Manual) Style: Organic Layer Height 0.1 mm
Actual results
First 6 layers there are no trees printed. Then at layer 7 trees begin to appear. But since the print nozzle is quite far from the last printed layer, the trees don't print.
Expected results
Trees should be printing right from the build plate.
Project file & Debug log uploads
143-21-21_body_1.zip
Checklist of files to include
Anything else?
No response