SoftFever
commented
7 months ago I'm not able to repro the bug with the attached project. Are you able to repro this crash consistently? Any extra info would be helpful
Closed DBShrill closed 7 months ago
SoftFever
commented
7 months ago I'm not able to repro the bug with the attached project. Are you able to repro this crash consistently? Any extra info would be helpful
Sushiman42
commented
7 months ago I am having trouble with this as well. Seems to be related to #3346. Interestingly, I was able to solve this by mirroring my parts, exporting as STL, and then re-importing them alongside the non-mirrored originals.
DBShrill
commented
7 months ago I'm not able to repro the bug with the attached project. Are you able to repro this crash consistently? Any extra info would be helpful
Only for that specific file. I provided all the information about that specific error but a problem that arose was that if my layer height was above 0.32 (for a 0.4mm nozzle), the app would never open. I could only fix this issue by manually editing the slicer profile using some text editor.
As of now I have not had any error with any other file the 2.0.0 beta seems to be working well but I will be sure to give more information if such a bug occurs again.
DBShrill
commented
7 months ago I have tried reproducing the error again and have not been able to. If someone else were to have this issue I would suggest trying to manually lay the object flat or mirroring the object directly from a different modeling software. As far as I know, this seems to be an isolated issue that may have only affected me.
BlackEagle94
commented
7 months ago The issue still Exists on v2.0.0 nightly build. The Object was Mirrored correctly. When Start to Slice Orca will Crash. Orca v2.0.0 Mirroring Crash.txt
ckonkel
commented
5 months ago I have the same issue with this model, when I try mirroring (x or y or z)it I get this error: Orca 2.0.0 windows 11
A fatal error occurred: "Access violation" Please save your project and restart the application
using this model
have seen other errors that force me to restart orca as well, but have not replicated , but happens when mirroring
Is there an existing issue for this problem?
OrcaSlicer Version
1.9.1 and 2.0.0 beta
Operating System (OS)
macOS
OS Version
MacOS 136.2
Additional system information
M2 Pro 16gb
Printer
Voron 0.2
How to reproduce
Actual results
App crashes
Expected results
Should be able to slice normally and upload it to my designated printer
Project file & Debug log uploads
stand_2_b_LHS.3mf.zip debug_Fri_Mar_15_11_30_25_61421.log.0.zip
Checklist of files to include
Anything else?
No response