Can't export config files

[missile150]

Is there an existing issue for this problem?

• [X] I have searched the existing issues

OrcaSlicer Version

1.9.0

Operating System (OS)

Windows

OS Version

n/a

Additional system information

No response

Printer

Ender 3 Pro

How to reproduce

1. Go to Export Config
2. Select Filament bundle(.orca_filament), or Select Filament presets(.zip), or select Process presets(.zip)
3. You should be able to select printer names for these files. That function does not exist and will not let you export any of the 3 items in step 2.

Actual results

Can not export 3 of the 5 export selections.

Expected results

We should be able to export all Presets.

Project file & Debug log uploads

n/a

Checklist of files to include

• [ ] Log file
• [ ] Project file

Anything else?

[Noisyfox]

This has been fixed in 2.0

[missile150]

This has been fixed in 2.0

My concern is upgrading without a backup and loosing the info. Cause there is no going back. So overwriting the old version always has that concern. And installing a new version aside from the old version will make me have to manually enter all the info I have. So without being able to export the config, I am very hesitant to just upgrade. Especially to a BETA version.

[LJKraus]

You really should have backups of your entire system.

I have never had an upgrade lose or change my User Presets. If you are really worried, go to Help>Open Configuration Folder, which will open File Explorer at "C:\Users\%username%\AppData\Roaming\OrcaSlicer". Backup the User folder to a safe place.

Or just drill down to "C:\Users\%username%\AppData\Roaming\OrcaSlicer\user\1737888447\filament" and copy the .json files, which is basically what "Export" does. (the numbered folder will be different).

And you can go back to old versions. On the Releases page, go to the version you want, open the Assets link for that version, download and install.

[3DWORX-SA]

In v2.2.0 Export Configs, when "Printer config bundle" is selected, the 0.4mm nozzle that is installed in my X1 Carbon is not displayed, and instead only a 0,6mm nozzle can be selected.

A 0.4mm and a 0.6mm nozzle were selected from the Printer Selection dialog,

but the current installed and selected nozzle is the 0.4mm nozzle, not the 0.6mm nozzle.

It should be possible to export all the settings for the currently installed and selected nozzle (0.4mm), since a custom filament profile has been created.

[LJKraus]

This has been fixed in 2.0

No, I don't think it has. I have only my X1C with a .04 nozzle, but seven User Process presets. I can use only the two filament preset export options. If I attempt to export Printer config bundle, Printer presets or Process presets, I cannot select or export anything. I checked both the 2.0.0 release and portable 2.1.0-dev.

Bambu Studio beta 3, 1.9.0.70 has the same problem.

I'm not concerned about losing my presets because that has never happened to me, I have backups, and I do not rely on the Export function, but the fact remains that Export is not working as intended.

[Noisyfox]

Could you send me your "C:\Users\%username%\AppData\Roaming\OrcaSlicer" folder?

[3DWORX-SA]

Sure, if it'll help solve this, but how?

[Noisyfox]

Sure, if it'll help solve this, but how?

Email me via timemanager.rick (at) gmail

[h-overstreet]

This has been fixed in 2.0

I have this issue in 2.1.1

[LJKraus]

Preset export works here in 2.1.1, but I did not think so at first. Lack of contrast makes it nearly impossible to see that there are check boxes in Dark Mode and they are only slightly more visible in light mode.

Check boxes in Preferences are much more visible.

Enhance the check box outline and perhaps eliminate the shading behind the text and checkboxes?

[dderbidge]

This has been fixed in 2.0

This also happens in 2.1.0 on my Mac.

[mbussen-ot]

I can also confirm that this issue is still happening on 2.0.0 and 2.1.1.

[dderbidge]

I should have clarified that my issue was due to this issue.

6019

@mbussen-ot Can you post a screenshot of what you are seeing in 2.1.1? Also, are you using a Mac too?

[mbussen-ot]

I am not using a Mac. I am on Windows 11 Enterprise 22000.3079.

As an example, I have User Presets for my Process configuration, but when I attempt to export them, it doesn't give me the option to select any presets on the Export Preset Bundle window. If I press "OK" it gives me the message that I need to select an option.

[5jvm0u4]

Same problem here, there's no way to scroll down to hit those hitboxes

[Mosher23]

Same here cannot select anything for the export.

Mac OS

[jaeseopark]

Same issue. I have Bambu A1 and A1 Mini. Only Bambu A1 Mini is available for selection in the export window. I have custom filaments for both printers.

[Rickthebig]

I don't want to be boring but... same issue here. I use a self-defined printer based on changes from an existing one. I cannot choose anything to export (v. 2.1.1 on Windows).