Open Daitallica opened 4 months ago
I think have figured out a workaround
Select all (ctrl + a) Right click => convert from inches Right click => restore to inch
it appears to bring them back to on load sizes
I hope this helps
same for 0.8 still present on 2.1.0-rc
same for 0.8 still present on 2.1.0-rc
Out of curiosity did you try the workaround I posted?
same for 0.8 still present on 2.1.0-rc
Out of curiosity did you try the workaround I posted?
Yes and the scaling disappears but something odd remains in the slicing, it's messed somehow
Is there an existing issue for this problem?
OrcaSlicer Version
2.0.0
Operating System (OS)
Windows
OS Version
11
Additional system information
No response
Printer
Creality Ender 5
How to reproduce
Set nozzle width to 1mm nozzle, click calibration click flow rate pass 1 Click preview OR Click Slice
Actual results
Models scale up massively in X, Y and Z and no longer fit on the plate
Expected results
Models to stay at same scale
Project file & Debug log uploads
log.zip Pre and post slice project.zip
Checklist of files to include
Anything else?
Ive seen this issue raised and closed at least twice on github with no fixes, I found these git reports on the orca slicer discord.
https://github.com/SoftFever/OrcaSlicer/issues/449 https://github.com/SoftFever/OrcaSlicer/issues/3729