kylek29
commented
1 month ago Came here to suggest this as I've seen it pop up in numerous places lately, seems to be a new trend for people to want to calibrate it.
Some Example Models for Reference:
Open markleaf131313 opened 1 month ago
kylek29
commented
1 month ago Came here to suggest this as I've seen it pop up in numerous places lately, seems to be a new trend for people to want to calibrate it.
Some Example Models for Reference:
Is there an existing issue for this feature request?
Is your feature request related to a problem?
Usually need to do some sort of calibration for the ironing setting depending on filament and creating a test print with a range of settings can be a bit tedious, especially adding things like text that correspond to the setting used to make the geometry a bit more complex to test the ironing.
Which printers will be beneficial to this feature?
All
Describe the solution you'd like
Add ironing to calibration with settings to choose the line spacing and pattern along with a range of speed and flow rate. With iteration step. Then generate test print geometry using the settings and ranges adding text to the print that corresponds with the setting used. I was thinking blocks with the percentage of flow on it as embedded text. Then connected by 2-3 layers for the corresponding speeds to help choose better ironing settings.
Describe alternatives you've considered
No response
Additional context
No response