I attached a Orca slicer export file of the problem.
When I print the part the blue overhang layer does not fuse with the print above and the result is that it falls apart.
Actual results
When I slice the file there is internally prepared a hole for a 0.5 mm spring inside the inner part of the part. When sliced the overhang over the hole seems to be too thin or with too much distance. I some times try to redesign the hole so its square, round or hexagon shaped - this can sometimes solve the problem
Expected results
When it works it prints perfectly and fuses perfectly together.
I design many similar parts, sometimes no problem other times many problems. They are designed in Solidworks, and the problem is the same if opened in Orcaslicer as .stp - .3mf or as Stl.
I know it is a multi body part - designed as a multibody part so I can use different filaments colors for the different bodys. Like Main body red - Numbers in White
Is there an existing issue for this problem?
OrcaSlicer Version
2.1.0
Operating System (OS)
Windows
OS Version
Windows 10 pro
Additional system information
Icore 7 32 gb ram Geforce 920m
Printer
Bambu Lab P1S with AMS
How to reproduce
I attached a Orca slicer export file of the problem. When I print the part the blue overhang layer does not fuse with the print above and the result is that it falls apart.
Actual results
When I slice the file there is internally prepared a hole for a 0.5 mm spring inside the inner part of the part. When sliced the overhang over the hole seems to be too thin or with too much distance. I some times try to redesign the hole so its square, round or hexagon shaped - this can sometimes solve the problem
Expected results
When it works it prints perfectly and fuses perfectly together. I design many similar parts, sometimes no problem other times many problems. They are designed in Solidworks, and the problem is the same if opened in Orcaslicer as .stp - .3mf or as Stl. I know it is a multi body part - designed as a multibody part so I can use different filaments colors for the different bodys. Like Main body red - Numbers in White![20220919_074227](https://github.com/SoftFever/OrcaSlicer/assets/173883397/78a65813-9ffa-480d-ad3a-b44d3726ec38)
Project file & Debug log uploads
Problem with small overhang leading to everything about the overhang falls off.zip
Attache is a Orca slicer saved file
Checklist of files to include
Anything else?
No response