Open Hellclay opened 1 month ago
I also just encountered this bug today. I have a M1 Mac. I had no issues with starting a print from SD card yesterday or otherwise in the past.
I just tried to print that file from the printer's (P1S) display and noticed it was a 3mf file and not a gcode file. I used the "Send" option in Orca Slicer to send that file to the printer SD card yesterday. I just deleted the file and sent it again after slicing it. The sent file is still a 3mf.
I deleted the file from the SD card again and tried the "Print Plate" option. The printer started the print but when I checked the cached file, it was a 3mf. It started printing without issue and even did the start gcode. I don't know what is up with this file.
Here is the file that is causing the issue for me.
Also encountered that issue today, I checked and none of the files I have on the SD card can be chosen to print without crashing. Here are the log files (Windows machine). crash_Sun_Jul_07_17_35_13_0.log debug_Sun_Jul_07_17_34_49_65884.log
Is there an existing issue for this problem?
OrcaSlicer Version
2.1.1
Operating System (OS)
Windows
OS Version
Windows 11
Additional system information
No response
Printer
Bambulab X1C/P1P
How to reproduce
device->micro-sd->Model->print
Actual results
Orcaslicer shuts down
Expected results
Print Window should open to select Timelapse,Flow Calibration, Bed Leveling and AMS Slot. In bambustudio that Problem doesnt exist.
Project file & Debug log uploads
crash_Fri_Jul_05_18_54_34_0.log
Checklist of files to include
Anything else?
No response