Incomplete layer generation.
I just enabled Others>prime tower setting, it displays the correct prime tower in prepare but as soon as i slice it, it breaks.
The Prime tower doesn't generate properly for smaller sizes, i changed the setting Others>prime tower> width to 10 mm from the default 60 mm and it breaks, here are the before and after.
Actual results
Here are the before and after for the first issue
Here are the before and after for the second issue
Expected results
A full prime tower
a prime tower 10x3mm, not 3x10mm, it just breaks further the more you change any setting.
Is there an existing issue for this problem?
OrcaSlicer Version
2.1.1
Operating System (OS)
Windows
OS Version
Windows 11 Pro
Additional system information
5800x 3070ti 32GB 8x4 6400mhz
Printer
Ender 3 V3 KE
How to reproduce
There are 2 bugs related to prime towers.
Actual results
Here are the before and after for the first issue
Here are the before and after for the second issue
Expected results
A full prime tower
a prime tower 10x3mm, not 3x10mm, it just breaks further the more you change any setting.
Project file & Debug log uploads
project_file.zip
log.zip
Checklist of files to include
Anything else?
No response