ZHop dosent triggers

[SphaeroX]

Is there an existing issue for this problem?

• [X] I have searched the existing issues

OrcaSlicer Version

2.1.1

Operating System (OS)

Windows

OS Version

Win 11

Printer

Sovol SV08

How to reproduce

Look at Project File on Height 1,2 Line 859

https://drive.google.com/file/d/1KTFCkZEZUP17Tt_p6RmAOvcKweCqFhly/view?usp=sharing

Actual results

Expected results

It should make an zHop when drive to the other Infill Point but it dosent, only over outer print walls

Project file & Debug log uploads

https://drive.google.com/file/d/1KTFCkZEZUP17Tt_p6RmAOvcKweCqFhly/view?usp=sharing

Checklist of files to include

• [ ] Log file
• [X] Project file

Anything else?

It whould be better when we have a choice, sometimes i want zhop over infill

[SphaeroX]

Project File: https://drive.google.com/file/d/1KTFCkZEZUP17Tt_p6RmAOvcKweCqFhly/view?usp=sharing

[SphaeroX]

Okay, I checked, with the PrusaSlicer the behavior is the same, but there I can also bypass the paths.

As I said, it would be better if this Z-hop also happened over the infill, because sometimes you have the problem of a leaking nozzle and it then hits the infill. Not much happens, but the print could still come loose and the noises are also quite strange when it keeps banging against it.

[github-actions[bot]]

Orca bot: this issue is stale because it has been open for 90 days with no activity.

[github-actions[bot]]

Orca bot: This issue was closed because it has been inactive for 7 days since being marked as stale.