search

SoftFever / OrcaSlicer

G-code generator for 3D printers (Bambu, Prusa, Voron, VzBot, RatRig, Creality, etc.)
https://discord.gg/P4VE9UY9gJ
GNU Affero General Public License v3.0
7.53k stars 905 forks source link

Wen importing a multi-plate 3mf that was saved with BambuStudio objects on plates are not centered. #6434

Closed sonjamichelle closed 2 weeks ago

sonjamichelle commented 3 months ago

Is there an existing issue for this problem?

OrcaSlicer Version

2.1.1 and lower

Operating System (OS)

Windows

OS Version

windows 11 (latest updates as of 8-12-24)

Additional system information

7th Gen Intel i7 64GB RAM NVIDIA RTX 3900

Printer

BambuLabs X1C

How to reproduce

Drag or load an 3mf print profile that had previously been saved with BambuStudio.

Actual results

All objects are off center. Instead of 128x128 they are placed at 133x135 or there abouts. Each subsequent plate beyond Plate 04 sees the offset higher on the pplate.

Expected results

All objects should be placed as close to the center of each plate or near the orginal placement as deemed by the print profile.

Project file & Debug log uploads

log.zip M-3+Predator+Prop.zip

Checklist of files to include

Anything else?

What you get:

image

What you SHOULD get:

image

sharky98 commented 3 months ago

Maybe related to #3641 and #3852?

github-actions[bot] commented 3 weeks ago

Orca bot: this issue is stale because it has been open for 90 days with no activity.

github-actions[bot] commented 2 weeks ago

Orca bot: This issue was closed because it has been inactive for 7 days since being marked as stale.

sonjamichelle commented 2 weeks ago

So, it is an issue that has been reported by many and collaborated by many and will be marked as a "non-issue" with no resolution planned.

Is that that the official stance?

sonjamichelle commented 2 weeks ago

Here is a possible solution.

When you try to upload a print profile created by OrcaSlicer to MakerWorld you get told that the profile was not created by BambuStudio. So at least BambuStudio is identifying itself in some form or other.

USE that identification to choose what plate spacing to use.

sonjamichelle commented 2 weeks ago

NOW I am seeing that even though I created the 3MF WITH OrcaSlicer, when I load multiple plates 4 and beyond NO LONGER HAVE THE PARTS IN THE CORRECT LOCATION!

So, closing this issue is NOT warranted!