Picasso, repetier

[Mirniy2000]

Is there an existing issue for this feature request?

• [X] I have searched the existing issues

Is your feature request related to a problem?

Я расстраиваюсь когда не вижу что разработчики добавили профиль принтеров Picasso

Which printers will be beneficial to this feature?

All

Describe the solution you'd like

Подружить свой принтер Picasso со слайсером

Describe alternatives you've considered

1. Печать на всех предоставленных разработчиком прошивках!

Additional context

No response

[NiXTheDev]

English translation:

<...>

Is your feature request related to a problem?

I'm upset when I don't see that the developers have added a profile for Picasso* printers

<...>

Describe the solution you'd like

Connect my Picasso* printer with a slicer

Describe alternatives you've considered

1. Printing on all firmware provided by the developer!

<...>

• Picasso3D - a Russian based company making 3D printers, all of their models have naming scheme of: Picasso Designer , where is the variant of the printer, namely: "Classic" "X", "X Series 2", "X Pro", "X Pro Series 2", "XL", "XL Pro", "XL Series 2" or "XL Pro Series 2", these printers use a proprietary firmware, but most of the Repetier/Marlin GCode spec is supported(basic commands like G0/1 or T0-9, M190, 140, 104, 109 are supported, Arcs of G2/3 are unknown, but should be supported)
• Picasso3D is also the creators of their own proprietary slicer software called "Polygon X" which slices loaded models into GCode for these printers with a custom extension of ".plgx", which is likely abbriveation of the program's name, but ultimately it contains standard GCode, I'll upload some examples in text format in the next comment

[NiXTheDev]

Examples of the PolygonX generated gcode for all available Picasso3D Designer printers: 3dbenchy-DesignerXL-Default-0.4mmnozzle.txt 3dbenchy-DesignerXLPro-Default-Double0.4mmnozzle.txt 3dbenchy-DesignerXLProSeries2-Default-0.4mmnozzle.txt 3dbenchy-DesignerXLProSeries2-Default-Double0.4mmnozzle.txt 3dbenchy-DesignerXPro-Default-Double0.4mmnozzle.txt 3dbenchy-DesignerXProSeries2-Default-Double0.4mmnozzle.txt 3dbenchy-DesignerXSeries2-Default-0.4mmnozzle.txt 3dbenchy-DesignerClassic-Default-0.4mmnozzle.txt 3dbenchy-DesignerX-Default-0.4mmnozzle.txt

Notes:

• Pro variants of Designer printers have 2 nozzles that they can switch between
• All Picasso Designer printers support nozzles of sizes: 0.3mm, 0.4mm, 0.5mm, and 0.8mm
• All Picasso Designer printers can be monitored and controlled over LAN, the printers have an ethernet port and no wifi capability, as well as a USB-B(like on paper printers) port either on the front or the back of the printer depending on the model, so far it is unknown why the USB port is included on the printer, but it is assumed to just be for printing over serial like on many printers that run Marlin or other firmware that supports printing over serial connection

[Mirniy2000]

Претензий к данному принтеру нет от слова совсем но если только круговую интерполяцию не поддерживает G2,G3 в данный момент считаю что сильно отстает PolygonX в том плане что отсутствуют возможность добавить скрипты для теста пластика, поэтому и обратился за помощью orca слайсера так как знаю что orca дитя prusa слайсера и быстрее развивается чем CURA!

[Mirniy2000]

Что это за g-коды , для чего они?

[NiXTheDev]

Что это за g-коды , для чего они?

Those are examples for SoftFever and contributors to perhaps implement a set of commands for those printers in Orca

You're free to try them out, just rename them into .plgx and print away(just don't forget to download the correct one for your printer), in an hour or so a benchy should be in the center of the build plate

[Mirniy2000]

Приветствую! Все отлично распечаталось спасибо, как я понимаю для создания профиля нужно определенное количество запросов на эту тему?