I was about to print this filament swatch and noticed that there were walls missing and some of the surfaces on various layers were also missing. I first saw this issue on the stable 2.1.1 and I tried adjusting my settings and nothing seemed to work. I then downloaded the most recent nightly build of 2.2.0 and still saw the issue. I did not have this issue last night when slicing a similar swatch.
Here is the first layer. Most notably you can see the missing walls (I had it set to 3 perimeters) on the five holes and the hexagon cut-out.
Here is the top most layer and you can see the missing/incomplete walls in the diagonals in the top right. You can see there is missing surface and walls in some the steps of the hexagon.
Expected results
I should see no missing perimeters or surfaces on any of the layers.
Is there an existing issue for this problem?
OrcaSlicer Version
2.2.0-Dev
Operating System (OS)
Windows
OS Version
Windows 11 (23H2)
Additional system information
No response
Printer
Anycubic Kobra Neo
How to reproduce
Actual results
I was about to print this filament swatch and noticed that there were walls missing and some of the surfaces on various layers were also missing. I first saw this issue on the stable 2.1.1 and I tried adjusting my settings and nothing seemed to work. I then downloaded the most recent nightly build of 2.2.0 and still saw the issue. I did not have this issue last night when slicing a similar swatch.
Here is the first layer. Most notably you can see the missing walls (I had it set to 3 perimeters) on the five holes and the hexagon cut-out.
Here is the top most layer and you can see the missing/incomplete walls in the diagonals in the top right. You can see there is missing surface and walls in some the steps of the hexagon.
Expected results
I should see no missing perimeters or surfaces on any of the layers.
Project file & Debug log uploads
Swatch_Missing_Walls_STL_3MF.zip log.zip
Checklist of files to include
Anything else?
No response