search

SoftFever / OrcaSlicer

G-code generator for 3D printers (Bambu, Prusa, Voron, VzBot, RatRig, Creality, etc.)
https://discord.gg/P4VE9UY9gJ
GNU Affero General Public License v3.0
7.52k stars 904 forks source link

New Adaptive Pressure Advance Calibration Style #6786

Open ruredi87 opened 2 months ago

ruredi87 commented 2 months ago

Is there an existing issue for this feature request?

Is your feature request related to a problem?

It takes very long to calibrate for adaptive pressure advance. I mean We have to slice seperately and print for every different speed/acceleration value.

Which printers will be beneficial to this feature?

All

Describe the solution you'd like

We should be able to input for speed and acceleration steps, so advanced pa calibration could be done at one step.

Describe alternatives you've considered

.

Additional context

No response

Ic33s commented 2 months ago

I would like to add, it would be greate if speed and acceleration values are calculated automaticly from the print/filament profiles, or there might be a useable default set (maybe per filament type). I'm still not sure what PA calibrations I need to do for using the adaptive feature and how to set them up correctly.

Andreas-strg commented 2 months ago

I also think also we need a new calibration tool for the adaptive pressure advance that makes all at once The manual handwork are to mutch...

ruredi87 commented 2 months ago

Definetly. We should enter acceleration/speed values and it should create patterns which could even cover all the print bed, like bunch of PA calibration patterns.

FlorianSchreiner1 commented 3 weeks ago

I'm just going through the calibration process and this would definitely be a worthwhile feature to add. The time required for the calibration isn't the bad part but rather the fact that one has to start a new print every ~15 min with manually set up tests.

DearTanker commented 2 weeks ago

Hopefully this feature will be released soon, which will save a lot of calibration time.