At least when using the attached model, but definitely not only with this model: set top surface layer width to 80% or less and use variable layer height (0.28 / 2), and try to slice it. I get an error, reproducibly. Workaround is to increase top surface layer width or not use variable layer height.
Actual results
Expected results
The model should be sliced normally even at the mentioned settings, which are in a healthy range.
Noisyfox
commented
3 days ago
Is there an existing issue for this problem?
OrcaSlicer Version
2.2.0 beta
Operating System (OS)
Windows
OS Version
Windows 10
Additional system information
No response
Printer
DIY BLV Cube (RRF)
How to reproduce
At least when using the attached model, but definitely not only with this model: set top surface layer width to 80% or less and use variable layer height (0.28 / 2), and try to slice it. I get an error, reproducibly. Workaround is to increase top surface layer width or not use variable layer height.
Actual results
Expected results
The model should be sliced normally even at the mentioned settings, which are in a healthy range.
Project file & Debug log uploads
Line_width_80_and_var_layer_height_errors.zip
Checklist of files to include
Anything else?
No response