search

SoftFever / OrcaSlicer

G-code generator for 3D printers (Bambu, Prusa, Voron, VzBot, RatRig, Creality, etc.)
https://discord.gg/P4VE9UY9gJ
GNU Affero General Public License v3.0
7.51k stars 904 forks source link

Parts moving upwards (Y) after saving and restarting #7195

Open rkarlsba opened 1 month ago

rkarlsba commented 1 month ago

Is there an existing issue for this problem?

OrcaSlicer Version

2.2.0-rc (and others)

Operating System (OS)

macOS

OS Version

15.0.1

Additional system information

No response

Printer

Bambu X1C Combo

How to reproduce

  1. fill a plate with parts
  2. save
  3. quit
  4. open orcaslicer and load the file
  5. repeat

Actual results

Parts, visible on a full bed, but probably other parts as well, move upwards (as in Y) over time

Screenshot 2024-10-22 at 18 09 42

Expected results

They stay in place

Project file & Debug log uploads

daabloe-bambu.zip

Checklist of files to include

Anything else?

No log file

brjohnso1 commented 1 month ago

Thank goodness I'm not the only one struggling with this problem. It happens most when there are a lot of plates, and more often with plates later in the series. For example, if you have plates 1-9, plates 7,8, and 9 are most likely to have parts that are shifted. It's not a consistent bug, but it is very common.

brjohnso1 commented 1 month ago

It's been happening for a long time in the daily builds, it didn't just happen in the RC. I am on intel Mac platform as well.

falo2k commented 1 month ago

Same issue present in 2.1.1 for me. Seems to only have shifted the final row of plate content.

rkarlsba commented 3 weeks ago

This is becoming rather annoying. It's not only the bottom row, it's all of them and AFAICS they move by a length of n*m, where n is something like 10mm and m is the row number, starting with 0

scrith commented 1 week ago

Can confirm this is happening in WIndows as well with v2.2.0

It is very annoying for large projects.