Generic PLA shows as ASA*

[soundtkllc]

Is there an existing issue for this problem?

• [X] I have searched the existing issues

OrcaSlicer Version

2.2

Operating System (OS)

Windows

OS Version

Windows 10

Additional system information

No response

Printer

All Bambu

How to reproduce

When you set the filament type in the printer (x1c only) or in the slicer to generic pla it always shows it as ABS. you have to set the type to bambu basic pla to get around this

Actual results

When you set the filament type in the printer (x1c only) or in the slicer to generic pla it always shows it as ABS. you have to set the type to bambu basic pla to get around this

Expected results

it should show as pla not abs

Project file & Debug log uploads

don't have

Checklist of files to include

• [ ] Log file
• [ ] Project file

Anything else?

No response

[Smerks101]

This is also occurring on the P1P with slot 1 of the AMS, it lets me set it on the other slots. It will show correctly in the app and bambu slicer but will not with Generic PLA in Orca.

[edgarbs1998]

I believe this is same issue as https://github.com/SoftFever/OrcaSlicer/issues/7223

[soundtkllc]

Originally I said ABS but after reading another person’s comment I confirmed it is actually ASA and I put incorrect info in original post when I stated it was ABS. Same problem but it shows the filament type loaded as ASA in the slicer device tab, when it is clearly entered as Generic PLA, instead of my above statement that it shows ABS.