Open ggardet opened 3 years ago
This is known errata regarding cables longer than .5 m, although we have seen it with other connections as well. NXP has recently released their latest hardware validation platform which should fix the bugs that were keeping us from tuning the SATA ports fully. We will release updated configurations after we finish the calibration and validation process.
Good news, thanks for the info.
Any update on this issue?
On my HoneyComb Lx2k, my mSATA disk (Samsung 860EVO 250GB) is connected using a SATA/mSATA converter and I need a number of reset (between 1 and 3 most of the time) to get the mSATA disk detected and to be able to boot from there. Maybe some timings are a bit short due to the mSATA/SATA converter?
I am using the latest UEFI firmware from this repo, but this is not a regression as I have this problem for a while. My LX2160A Com Express Type 7 is rev. 1.3.