SourabhSinghRathore / dslrdashboard

Automatically exported from code.google.com/p/dslrdashboard
0 stars 0 forks source link

openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory update bricked TP-Link #281

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
What steps will reproduce the problem?
1.Updated firmware using mr-3040 with 
openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory update bricked TP-Link 
(downloaded from http://wiki.openwrt.org/toh/tp-link/tl-mr3040?) 
2.Connected to tp-link and set user and password to admin.
3.Update reported it was successful and started reload ok.

What is the expected output? What do you see instead?
I was expected to connected to router when using the new ip.
I re-configured network parameters (v4)as suggested 
(ip 192.168.1.55, subnet 255.255.255.0 and gateway 192.168.1.1).
set browser to 192.168.1.1 but web page was unable to load.
I can't complete the required steps.
I have tried power off/on, reset with power on for 10 secs.

What version of the product are you using? On what operating system?
openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory update bricked TP-Link 
(downloaded from http://wiki.openwrt.org/toh/tp-link/tl-mr3040?)
Is this the problem?
Updated firmwae using Vista PC, and also tried with Win8 to communicate

Please provide any additional information below.
Can ping TP-Link using 192.168.1.1 and responds ok
Have 3 pos switch (v2) and origional firmware

Original issue reported on code.google.com by carl.min...@gmail.com on 17 Jul 2014 at 12:42

GoogleCodeExporter commented 9 years ago
The MR3040 firmware that contains can be located here: 
http://dslrdashboard.info/downloads/
Flash instructions can be found here: 
http://dslrdashboard.info/tp-link-mr3040-openwrt-flash/
Here with images: http://lrtimelapse.com/gear/dslrdashboard/

If you can ping the router then you didn't brick it. Does the firmware that you 
flashed has the web interface packages? Can you access the router with telnet 
or ssh?

Original comment by hub...@gmail.com on 17 Jul 2014 at 4:38

GoogleCodeExporter commented 9 years ago
I watched the Zaho video DSLR-Dashboard using MR3040 and believed the 
file name for the flash upgrade was 
"openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory".
 From the Downloads selection available, I was uncertain what was the 
correct file to download.

As a result, I did a google search and downloaded it from 
http://wiki.openwrt.org/toh/tp-link/tl-mr3040?)
The video was obviously made some time ago and the download file 
organisation has been upgraded.
I thought this was strange at the time I would need to do this, I did 
initially download V2 factory image but thought it was not correct. 
(File size is correct!)
"ddserver-openwrt-tl-mr3040-v2-squashfs-factory-0.13.bin" Version 2 is 
required as I have the 3 position switch.

TP-Link MR3040 ddserver OpenWrt firmware

V0.2-13

MR3040 version  V1  V2
factory
    *V1 factory image 
<https://drive.google.com/file/d/0BxMZ8XY3H2wiMFZMMlNXNkRYYzQ/edit?usp=sharing>*

    *V2 factory image 
<https://drive.google.com/file/d/0BxMZ8XY3H2wiWTJmVVFfVDY0Mzg/edit?usp=sharing>*

It appears, I  have downloaded the incorrect  file, or downloaded an old 
version.
I will try telnet, but am not sure how to update the flash with the new 
file at this stage.
I use Visual Studio and SQL server but will get a bit of help today 
using Telnet and SSH.
Thanks for the reply.

Original comment by carl.min...@gmail.com on 17 Jul 2014 at 11:19

GoogleCodeExporter commented 9 years ago
Got in with Telnet and then SSH. Have set user and password.

can get to .root directory ok.
Release  is "Bleeding Edge"
Revision is r41657
Volume is Barrier-breaker.

I am not sure how to update the flash with the current version from this 
stage.

Original comment by carl.min...@gmail.com on 18 Jul 2014 at 9:45

GoogleCodeExporter commented 9 years ago
while in ssh you can try this: 
http://wiki.openwrt.org/doc/howto/generic.sysupgrade

replace the firmware URL to the ddserver OpenWrt sysupgrade URL that matches 
your device.

Original comment by hub...@gmail.com on 18 Jul 2014 at 9:50