Please add a jumper for the enable pin of the WDT (Jumper_3_Bridged12) that is normally connected to GND.
Use a SMD Jumper footprint where pin 1 and 2 are normally connected by a trace which can be scratched.
During software development such a WDT can be very annoying when debugging code on the real hardware
Please add a jumper for the enable pin of the WDT (Jumper_3_Bridged12) that is normally connected to GND. Use a SMD Jumper footprint where pin 1 and 2 are normally connected by a trace which can be scratched. During software development such a WDT can be very annoying when debugging code on the real hardware