search

Spacecraft-NX / firmware

GNU General Public License v3.0
255 stars 70 forks source link

Flashed...but not working & can't rollback #10

Open MonsieurKimYong opened 3 years ago

MonsieurKimYong commented 3 years ago

When flashing the chip, It was well done with backuped bootloader files.

But when I turn on the switch, boot on genuin with white LED light on SXchip.

So I tried to restore SX firmware with Spacecraft & Sxupdater...

It say "no device detected"

when I connect with my 64bit Windows10, It's LED is green light.

What's the cause? How can I fix it?

1 SXcore & 1 SXlite same situation. PLZ help me.

topfire666 commented 3 years ago

If you go back to trying to flash, it doesn't give you error 6 or block? The light is blue and when you connect it to Windows it turns green. I solved it simply using another pc. Open backup and i Will see corrupt file.

samielis commented 3 years ago

im having the same issue. any ideas?

balika011 commented 3 years ago

Turn off the console by holding the power for 12 seconds and check your usb connection.

edkozuto commented 3 years ago

I have encountered the same issue. Now the switch just boots straight to an untouched sysnand.

samielis commented 3 years ago

Switching to my laptop fixed the issue. Still, not really a satisfying solution. Is any body experiencing the issue using Kaspersky Security Software?

edkozuto commented 3 years ago

I have encountered the same issue. Now the switch just boots straight to an untouched sysnand.

Fixed on another PC, too

topfire666 commented 3 years ago

I have another chip to flaw, I have tried to install windows 10 clean home and pro and it keeps giving the same error.

sthetix commented 3 years ago

use zadig to find the device, click options, list all devices, and if it is detected by ur windows, the modchip will be seen as DFU. make sure to upgrade or change its driver to usb serial cdc.

cryptblood1986 commented 3 years ago

use zadig to find the device, click options, list all devices, and if it is detected by ur windows, the modchip will be seen as DFU. make sure to upgrade or change its driver to usb serial cdc.

Did that. Still no luck. Gets stuck at creating backup bootloader. I've tried 8 usb cables. One computer and a laptop.

sthetix commented 3 years ago

Try using other usb port. I had that problem too, but I've fixed it by plugging the chip to other USB port.

On Sat, 1 May 2021 at 22:07, cryptblood1986 @.***> wrote:

use zadig to find the device, click options, list all devices, and if it is detected by ur windows, the modchip will be seen as DFU. make sure to upgrade or change its driver to usb serial cdc.

Did that. Still no luck. Gets stuck at creating backup bootloader. I've tried 8 usb cables. One computer and a laptop.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Spacecraft-NX/firmware/issues/10#issuecomment-830647069, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFJ23DYB4SMITDOIZ2D3Q63TLQKLTANCNFSM4VYNFDQA .

cryptblood1986 commented 3 years ago

Try using other usb port. I had that problem too, but I've fixed it by plugging the chip to other USB port. … On Sat, 1 May 2021 at 22:07, cryptblood1986 @.***> wrote: use zadig to find the device, click options, list all devices, and if it is detected by ur windows, the modchip will be seen as DFU. make sure to upgrade or change its driver to usb serial cdc. Did that. Still no luck. Gets stuck at creating backup bootloader. I've tried 8 usb cables. One computer and a laptop. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#10 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFJ23DYB4SMITDOIZ2D3Q63TLQKLTANCNFSM4VYNFDQA .

Thanks that actually worked. Log says successfully flashed but when I turn on the unit I'm getting a blinking green light with no screen. Is this normal?