After program SSMicro I can't connect to that USB port

[jjdsantos]

Is there an existing issue for this?

• [X] I have searched the existing issues

Describe your problem

After program SSMicro I can't connect to that USB port

Steps to reproduce

Tools -> Options: Board: SS Micro USB Device ID: "Logitech USB Keyboard" (or any other) Protocol: I2C Debug: Disabled Neopixel (WS2812b): D11 (pin in use) Serial Bridge: Disabled Serial Bridge Enable Pin: Disabled Serial Bridge Reset Pin: Disabled Serial Bridge GPIO-0 Pin: Disabled Port: not availabe after upload/program

Did I missed something? Thanks for your help/advise.

What hardware are you using?

SS Micro

Anything else?

No response

[welcome[bot]]

Thanks for opening your first issue here! 🎉
👉 Be sure to:
1. 📖 Have a look at the Wiki and README for information
2. 🔍 Search for similar issues (open and closed)
3. ✍️ Provide enough information to understand, recreate and help out with your problem
4. ℹ️ Let us know if you find a solution
5. 📕 Close the issue when your problem has been solved

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.