How to reduce the brightness of battery level indicator green LED in DSTIKE Deauther watch v3?

[RahulNambi]

Hello Guys, Which defined MACRO should i checkin code to modify to reduce the brightness of Battery level green led ?

Thanks, RNambi.

[welcome[bot]]

Congrats on opening your first issue on this repository! 🎉
This is a automated message to help you avoid common pitfalls when asking for help online.
👉 Be sure to:
🇬🇧 Communicate in English so everybody can understand you
📖 Have a look at the Wiki and README for information
🔍 Search for similar issues (open and closed)
✍️ Provide enough information to understand, recreate and help out with your problem
ℹ️ Let us know if you find a solution and please share it with us
📕 Close the issue when your problem has been solved

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[tubblindo]

Did you manage to solve it? I have the same problem but I don't know how to do it

[lspoplove]

Did you manage to solve it? I have the same problem but I don't know how to do it — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.Message ID: @.***>

[modem-man-gmx]

same her, but ... there is no way to reduce it. the 4 LEDs are connected to injoinic IP5306 Datasheet This circuit handles each 2 of the 4 LEDs anti-parallel, to control the LEDs with only 3 wires. There is no common resistor or such, if wired with 4 LEDs.

I don't understand the description about the pwr switch completely.

Push button’s connecting is shown in Fig 5. IP5306 can identify long push and short push.

• If button is pushed longer than 30ms but shorter than 2s, IP5306 will identify the action as short push. Short push will open SOC indicator LEDs and step-up converter
• If button is pushed longer than 2s, IP5306 will identify the action as long push. Long push will close step-up convertor, SOC indicator LED and flashlight LED.
• If button is pushed shorter than 30ms, IP5306 will ignore the action.
• If two short push is detected within 1s, IP5306 will open or close flashlight LED

Almost all actions I tried just cut or reconnect the power from ESP and OLED.

My best LED dimmer so far: small piece of thin paper and a stripe of transparent TESA duct tape...