search

SpacehuhnTech / esp8266_deauther

Affordable WiFi hacking platform for testing and learning
http://deauther.com
Other
13.32k stars 2.57k forks source link

Buttons not working #1573

Open to6koto6ko opened 2 years ago

to6koto6ko commented 2 years ago

I tried to install the deauther 2.6.1 on few esp8266 devices. Unfortunately the buttons are not operational at all. There are two Nodemcu 8266 v1 where the display (I2C) and everything else is working properly except the buttons. I have one more ESP8266 noname and the result is the same. the config is default: // ===== BUTTONS ===== //

define BUTTON_UP 14 // D5

define BUTTON_DOWN 12 // D6

define BUTTON_A 2 // D4

define BUTTON_B 0 // D3

but connecting to the GND is without any change.
The terminal command : screen mode buttontest shows only false on all 4 buttons. there is no difference between D5,D6 or D3 connected to the GND or not

welcome[bot] commented 2 years ago

Congrats on opening your first issue on this repository! 🎉
This is a automated message to help you avoid common pitfalls when asking for help online.
👉 Be sure to:
🇬🇧 Communicate in English so everybody can understand you
 📖 Have a look at the Wiki and README for information
🔍 Search for similar issues (open and closed)
 ✍️ Provide enough information to understand, recreate and help out with your problem
ℹ️ Let us know if you find a solution and please share it with us
 📕 Close the issue when your problem has been solved

fcamargo10 commented 1 year ago

Same here! How you fix ?

sinaun4given commented 1 year ago

me too !

Joaogmbd commented 1 year ago

same problem there :(

goliath29 commented 1 year ago

Hi, has there been a solution for this issue? Experiencing the same myself

sinaun4given commented 1 year ago

i find that.u must use dstike bin file .in this version button works.bro you gonna love me when try

On Fri, Apr 28, 2023 at 3:28 PM goliath29 @.***> wrote:

Hi, has there been a solution for this issue? Experiencing the same myself

— Reply to this email directly, view it on GitHub https://github.com/SpacehuhnTech/esp8266_deauther/issues/1573#issuecomment-1527458674, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZXRASTUJUM5G37IYGGP3VTXDOWFXANCNFSM56SGD6ZA . You are receiving this because you commented.Message ID: @.***>

goliath29 commented 1 year ago

i find that.u must use dstike bin file .in this version button works.bro you gonna love me when try … On Fri, Apr 28, 2023 at 3:28 PM goliath29 @.> wrote: Hi, has there been a solution for this issue? Experiencing the same myself — Reply to this email directly, view it on GitHub <#1573 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZXRASTUJUM5G37IYGGP3VTXDOWFXANCNFSM56SGD6ZA . You are receiving this because you commented.Message ID: @.>

You god damn legend. I love you. The DSTIKE deauther .bin worked perfectly!!! Thank you so much

sinaun4given commented 1 year ago

your welcome😍😍😍😍

On Sat, Apr 29, 2023 at 2:10 AM goliath29 @.***> wrote:

i find that.u must use dstike bin file .in this version button works.bro you gonna love me when try … <#m-2986585486366208085> On Fri, Apr 28, 2023 at 3:28 PM goliath29 @.> wrote: Hi, has there been a solution for this issue? Experiencing the same myself — Reply to this email directly, view it on GitHub <#1573 (comment) https://github.com/SpacehuhnTech/esp8266_deauther/issues/1573#issuecomment-1527458674>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZXRASTUJUM5G37IYGGP3VTXDOWFXANCNFSM56SGD6ZA https://github.com/notifications/unsubscribe-auth/AZXRASTUJUM5G37IYGGP3VTXDOWFXANCNFSM56SGD6ZA . You are receiving this because you commented.Message ID: @.>

You god damn legend. I love you. The DSTIKE deauther .bin worked perfectly!!! Thank you so much

— Reply to this email directly, view it on GitHub https://github.com/SpacehuhnTech/esp8266_deauther/issues/1573#issuecomment-1528165365, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZXRASV6XUF5AKTU43PP5FDXDRBM5ANCNFSM56SGD6ZA . You are receiving this because you commented.Message ID: @.***>

glen4cindy commented 1 year ago

I've got the same problem. I've tried 3 different dev boards and all 3 are the same. The screen comes on and the web interface works. I've tried using the alternate bin file and I've tried flashing with Arduino IDE and ESPWebTool.

I've also made sure to uncomment the appropriate lines referring to buttons D5 and D6 when I used Arduino IDE. Still no joy when it comes to using the buttons.

I've even tried using the wires directly on the pins, D5 to GND, D6 to GND without success.

Any suggestions would be appreciated.

yashgunjal04 commented 1 year ago

same bug I also faced how to fix it ?

I tried to install the deauther 2.6.1 on few esp8266 devices. Unfortunately the buttons are not operational at all. There are two Nodemcu 8266 v1 where the display (I2C) and everything else is working properly except the buttons. I have one more ESP8266 noname and the result is the same. the config is default: // ===== BUTTONS ===== //

define BUTTON_UP 14 // D5

define BUTTON_DOWN 12 // D6

define BUTTON_A 2 // D4

define BUTTON_B 0 // D3

but connecting to the GND is without any change. The terminal command : screen mode buttontest shows only false on all 4 buttons. there is no difference between D5,D6 or D3 connected to the GND or not

sinaun4given commented 1 year ago

download dstike version . button works in this version.you gonna love me bro after test

On Wed 14 Jun 2023, 20:54 yashgunjal04, @.***> wrote:

same bug I also faced how to fix it ?

I tried to install the deauther 2.6.1 on few esp8266 devices. Unfortunately the buttons are not operational at all. There are two Nodemcu 8266 v1 where the display (I2C) and everything else is working properly except the buttons. I have one more ESP8266 noname and the result is the same. the config is default: // ===== BUTTONS ===== //

define BUTTON_UP 14 // D5

define BUTTON_DOWN 12 // D6

define BUTTON_A 2 // D4

define BUTTON_B 0 // D3

but connecting to the GND is without any change. The terminal command : screen mode buttontest shows only false on all 4 buttons. there is no difference between D5,D6 or D3 connected to the GND or not

— Reply to this email directly, view it on GitHub https://github.com/SpacehuhnTech/esp8266_deauther/issues/1573#issuecomment-1591701810, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZXRASSRVDIGJMIKGFGOBNDXLHXVZANCNFSM56SGD6ZA . You are receiving this because you commented.Message ID: @.***>

glen4cindy commented 1 year ago

same bug I also faced how to fix it ?

I tried to install the deauther 2.6.1 on few esp8266 devices. Unfortunately the buttons are not operational at all. There are two Nodemcu 8266 v1 where the display (I2C) and everything else is working properly except the buttons. I have one more ESP8266 noname and the result is the same. the config is default: // ===== BUTTONS ===== // #define BUTTON_UP 14 // D5 #define BUTTON_DOWN 12 // D6 #define BUTTON_A 2 // D4 #define BUTTON_B 0 // D3 but connecting to the GND is without any change. The terminal command : screen mode buttontest shows only false on all 4 buttons. there is no difference between D5,D6 or D3 connected to the GND or not

Same issue here.

I've tried about 5 different boards now. I found ONE where the buttons work. Oddly enough it's a board with an integrated display but the integrated display doesn't work. I just realized it uses different pins than D1 and D2.

I tried the same boards with another sketch wired to buttons and LED's using the same pins. They all worked.

I'm thinking there is another issue. Maybe it's some combination of what board and configuration you select or something. I'm so very confused.

I tried the suggestion of dstrike and unless I'm doing something wrong that didn't work either.

I'm not sure what to try next.

yashgunjal04 commented 1 year ago

Which version , theay have lot of versions available please help bro

On Thu, 15 Jun 2023 at 02:47, $imba @.***> wrote:

download dstike version . button works in this version.you gonna love me bro after test

On Wed 14 Jun 2023, 20:54 yashgunjal04, @.***> wrote:

same bug I also faced how to fix it ?

I tried to install the deauther 2.6.1 on few esp8266 devices. Unfortunately the buttons are not operational at all. There are two Nodemcu 8266 v1 where the display (I2C) and everything else is working properly except the buttons. I have one more ESP8266 noname and the result is the same. the config is default: // ===== BUTTONS ===== //

define BUTTON_UP 14 // D5

define BUTTON_DOWN 12 // D6

define BUTTON_A 2 // D4

define BUTTON_B 0 // D3

but connecting to the GND is without any change. The terminal command : screen mode buttontest shows only false on all 4 buttons. there is no difference between D5,D6 or D3 connected to the GND or not

— Reply to this email directly, view it on GitHub < https://github.com/SpacehuhnTech/esp8266_deauther/issues/1573#issuecomment-1591701810>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AZXRASSRVDIGJMIKGFGOBNDXLHXVZANCNFSM56SGD6ZA>

. You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/SpacehuhnTech/esp8266_deauther/issues/1573#issuecomment-1591996654, or unsubscribe https://github.com/notifications/unsubscribe-auth/BASMCZBK7WW4EZTGSTLQ2HLXLIS55ANCNFSM56SGD6ZA . You are receiving this because you commented.Message ID: @.***>

glen4cindy commented 1 year ago

Which version , theay have lot of versions available please help bro

I was finally able to get one of my boards working.

The D1 mini is currently working by using the .bin version.

My previous attempts were done using the .zip versions and the Arduino IDE software to compile and write the file to the board.

billypolidorou commented 1 year ago

same problem there :( i need help :) pls help me pls !!

ArticPolarDEV commented 10 months ago

same problem there :( i need help :) pls help me pls !!

Same problem, bro. I need Help!

Salvatore67678 commented 9 months ago

It looks like you're having trouble with your DSTIK, and you've tried various .bin files, but only the "up" button with D6 and "down" with D7 are working, while the "ok" button isn't functioning.

CyberTechNex commented 4 months ago

download dstike version . button works in this version.you gonna love me bro after test … On Wed 14 Jun 2023, 20:54 yashgunjal04, @.> wrote: same bug I also faced how to fix it ? I tried to install the deauther 2.6.1 on few esp8266 devices. Unfortunately the buttons are not operational at all. There are two Nodemcu 8266 v1 where the display (I2C) and everything else is working properly except the buttons. I have one more ESP8266 noname and the result is the same. the config is default: // ===== BUTTONS ===== // #define BUTTON_UP 14 // D5 #define BUTTON_DOWN 12 // D6 #define BUTTON_A 2 // D4 #define BUTTON_B 0 // D3 but connecting to the GND is without any change. The terminal command : screen mode buttontest shows only false on all 4 buttons. there is no difference between D5,D6 or D3 connected to the GND or not — Reply to this email directly, view it on GitHub <#1573 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZXRASSRVDIGJMIKGFGOBNDXLHXVZANCNFSM56SGD6ZA . You are receiving this because you commented.Message ID: @.>

which version of the dstike should i use i have a node mcu and trying to get the buttons working with the ssd1306 display

SkyNezu commented 3 months ago

I have a dstike deauther monster v5. The up-down-OK button does not work. The other buttons work. What firmware version do I need to use to make all the buttons work?

sinaun4given commented 3 months ago

can you tell me whats the gpio of others button in your version?we are talking about nodemcu esp ,sorry idont know about your version(v5 ...) if you want to make this with nodemcu i can help you

On Sun, Jun 16, 2024, 7:11 PM SkyNezu @.***> wrote:

I have a dstike deauther monster v5. The up-down-OK button does not work. The other buttons work. What firmware version do I need to use to make all the buttons work?

— Reply to this email directly, view it on GitHub https://github.com/SpacehuhnTech/esp8266_deauther/issues/1573#issuecomment-2171747656, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZXRASV355IKL2RI7BKLKHTZHWW2PAVCNFSM56SGD6ZKU5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TEMJXGE3TINZWGU3A . You are receiving this because you commented.Message ID: @.***>

SkyNezu commented 3 months ago

can you tell me whats the gpio of others button in your version?we are talking about nodemcu esp ,sorry idont know about your version(v5 ...) if you want to make this with nodemcu i can help you … On Sun, Jun 16, 2024, 7:11 PM SkyNezu @.> wrote: I have a dstike deauther monster v5. The up-down-OK button does not work. The other buttons work. What firmware version do I need to use to make all the buttons work? — Reply to this email directly, view it on GitHub <#1573 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZXRASV355IKL2RI7BKLKHTZHWW2PAVCNFSM56SGD6ZKU5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TEMJXGE3TINZWGU3A . You are receiving this because you commented.Message ID: @.>

I made a slight mistake. I have this device, link: https://dstike.com/products/dstike-deauther-monster-v2

All buttons work. Except for the up-down-ok button. I used the firmware for monster (bin - dstike - monster) on the page https://deauther.com/docs/download. I installed the firmware through the esp.huhn.me website. The firmware went without errors.

tihnar228 commented 2 months ago

Hi guys. have you figured out how to make the buttons work? Everything worked fine before but now it doesn't work. I tried many firmwares.

scienceLabwork commented 1 month ago

There is a small correction in the code

  1. Go to A_config.h
  2. Scroll down to line-378 or until you find following lines #elif defined(DEFAULT_ESP8266) || defined(NODEMCU) || defined(WEMOS_D1_MINI) || defined(DSTIKE_USB_DEAUTHER) || defined(DSTIKE_NODEMCU_07) || defined(DSTIKE_DEAUTHER_V1) || defined(DSTIKE_DEAUTHER_V2) || defined(DSTIKE_DEAUTHER_V3)
  3. below that add following lines `

    define BUTTON_UP 12

    define BUTTON_DOWN 13

    define BUTTON_A 14

    `

Hope, This works for you.