welcome[bot]
commented
2 weeks ago Congrats on opening your first issue on this repository! đ
This is a automated message to help you avoid common pitfalls when asking for help online.
đ Be sure to:
đŦđ§ Communicate in English so everybody can understand you
đ Have a look at the Wiki and README for information
đ Search for similar issues (open and closed)
âī¸ Provide enough information to understand, recreate and help out with your problem
âšī¸ Let us know if you find a solution and please share it with us
đ Close the issue when your problem has been solved
GimpSare
Steps Taken: Checked USB cables and ports. Tried connecting GPIO0 to GND to enter flash mode. Attempted to re-flash using different software (esptool, NodeMCUFlasher). Switched computers and USB ports to rule out driver issues.
Environment: ESP8266 model: [NodeMcu V3] Firmware version: deauther_2.1.0_1mb.bin OS: Windows 10 Flashing software: ESP8266Flasher
Expected Behavior: After flashing, I expected the device to be visible in the device manager and to be accessible via COM port for further interactions or reflashing.
Actual Behavior: The device is not recognized at all by the computer. It doesn't appear in the device manager, nor is it detected by flashing tools.
Questions:
Has anyone encountered similar issues with deauther_2.1.0_1mb.bin? Are there any specific steps for recovering a device that is not detected after flashing? Could this be related to a hardware issue with specific ESP8266 models or versions? Any insights or troubleshooting advice would be greatly appreciated!