search

Spagett1 / pineflash

A tool to flash ironos to the pinecil soldering iron and possibly other pine64 devices in the future
Other
213 stars 12 forks source link

Blisp: SP open failed: -2 #65

Closed saibhusain closed 3 months ago

saibhusain commented 9 months ago

This might be a simple problem, but I haven't found any older threads about it. Pinecil V2 connects just fine, but flashing fails with the following logs:

Pineflash v0.5.3 Windows PineFlash: Versions successfully fetched. Pineflash: Pinecilv2 detected PineFlash: Serial port is COM5 PineFlash: Download of Language Info Complete. PineFlash: Downloading Firmware Pinecilv2 v2.22-rc2. PineFlash: Download Complete. PineFlash: File extracted successfully PineFlash: Attempting to flash Pinecilv2 with the firmware C:\Users... Blisp: SP open failed: -2 Failed to open device.

1jgj90g2nk commented 3 months ago

Problems with flashing can happen if the pinecil tip is still inserted. Make sure you remove the tip off your device before connecting it to your computer. Hope it helps!

sloboy commented 3 months ago

I have the same issue as above, even with tip removed.

Spagett1 commented 3 months ago

This seems to be an issue with the upstream blisp so I'm closing the issue, I'd suggest reporting it there.