Closed jose1094 closed 2 years ago
Try swapping moving the plug from the Y motor to the Y2 port on the Xpro and likewise the Y2 motor over to the Y port on the Xpro - does the fault them move to the other axis? If so, you may have a faulty motor or may want to double or triple check that you don't have an unseen short circuit on the motor wiring.
In other words does the fault remains only on one specific port? - your picture shows the fault on "Y" whereas you mentioned "Y2"
Hola buenas tardes ya revise todo el cableado y los motores y el problema persiste en el puerto Y Cuando cambio el motor de puerto funcionan bien ambos motores.
(si me quivoque en el momento que dije que era el Y2 al momento de redactar)
Muchas gracias.
El lun., 16 may. 2022, 1:25 p. m., Spark @.***> escribió:
Try swapping moving the plug from the Y motor to the Y2 port on the Xpro and likewise the Y2 motor over to the Y port on the Xpro - does the fault them move to the other axis? If so, you may have a faulty motor or may want to double or triple check that you don't have an unseen short circuit on the motor wiring.
In other words does the fault remains only on one specific port? - your picture shows the fault on "Y" whereas you mentioned "Y2"
— Reply to this email directly, view it on GitHub https://github.com/Spark-Concepts/xPro-V5/issues/139#issuecomment-1127994481, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVZJBR7B4UPXD324AQBZSXTVKKHKTANCNFSM5VJTTTWQ . You are receiving this because you authored the thread.Message ID: @.***>
It sounds like you may have a faulty unit - please use the contact us page found here for resolution (please be sure to provide when and where you purchased your xPro) : https://www.spark-concepts.com/contact-us-1/
espero esten bien tengo un problema con el eje y pero el problema viene desde el controlador ya revise cableado y los motores pero estan bien, pero cuando conecto el motor al puerto y2 se activa un bombillo rojo y el motor cuando se mueve empieza a vibrar como si se fuera a salir el motor de si mismo. espero una colaboracion urgente ya que no e podido utilizar ni una vez y estoy muy triste con este controlador ya que tiene multiples fallas.
https://user-images.githubusercontent.com/91394247/167231830-0d89a8a3-31cc-4437-b00e-3b198349e36a.mp4
https://user-images.githubusercontent.com/91394247/167231832-3aaec4b0-3efc-4111-a1cf-b4c78a4be2c4.mp4
.