spindle rs485 unresponsive 8

Spark-Concepts / xPro-V5

xPro-V5 CNC Motion Control System Documentation and User Information

42 stars 19 forks source link

spindle rs485 unresponsive 8 #193

Closed ghalib1399 closed 1 year ago

ghalib1399 commented 1 year ago

Hi all when I send file to run, its working for 1 minute then spindle stop moving but the head still running! with (spindle rs485 unresponsive 8) message. I press pause then I press run againe , its moving again then stop ...

can any one help me ?

Spark-Concepts commented 1 year ago

This is typically a noise issue generated by the VFD:

Ensure RS485 wiring is less than 1 meter in length, twisted, and connected properly (resistors are likely needed in your case)

In cases where VFD noise is particularly severe (typically only encountered with VFD's on 220V mains); you may need to install an RS485 isolator - see https://github.com/Spark-Concepts/xPro-V5/issues/164#issuecomment-1219037733 rs485_Isolated

ghalib1399 commented 1 year ago

Thank you for your help. my problem was from usb cable connecting laptop to xPro-V5.

Spark-Concepts commented 1 year ago

Gotcha, I'm glad you got it working!