search

Spark-Concepts / xPro-V5

xPro-V5 CNC Motion Control System Documentation and User Information
42 stars 19 forks source link

Issue with large file sizes failing #195

Open wakeboy180 opened 1 year ago

wakeboy180 commented 1 year ago

I have had my CNC xPro V5 controller running on a Ultimate Bee for several months with no issue. I have done some small detailed 3d carves that the file size was around 2MB. Decided to do a large 3D carve with file sizes ranging 12-25MB all have failed randomly between 3 to 15 minutes into the carve. This is happening using UGS on a good laptop or uploading file directly to the controller.

I have updated the firmware on the controller already with no change.

Keegjay commented 1 year ago

I'm having the same problems, and we are not the only ones, when files are a bit bigger it just stops in a random part and then says job done when in wi-fi. When you try to access the file directory, it just doesn't show all the files present in the micro SD memory. It needs to be shut down and unplugged to access all of it, making you loose your zero position because of the homing reset.

When using usb to read from pc it stops consistently at same spot even when file is reloaded.

I will try with a higher class micro SD but if that is the problem it is quite a shame.