search

Speedy1985 / enigmalight

Ambilight clone for broadcom based linux receivers.
GNU General Public License v3.0
7 stars 19 forks source link

support of Philips Hue lights is very important !!!!!!! #4

Open ghost opened 9 years ago

bigfreak85 commented 9 years ago

For Example see: http://blog.krannich.de/2014/11/ambilight-mit-boblight-und-philips-hue-bridge/

Newan commented 9 years ago

Cannot start python output: [device] name hue output python /usr/dreamWifiLight/dkhue.py channels 6 type popen interval 200000 debug off

log: EnigmaLight (c) 2014 Speedy1985 and Oktay Oeztueter. (Based on Boblight (c) 2009 by Bob Loosen)

[InitLog] start of log /home/elight-addons/.enigmalight/enigmalight.log [CConfig::LoadConfigFromFile] Opening /etc/enigmalight.conf [CConfig::CheckConfig] checking config lines [CConfig::CheckConfig] config lines valid [CConfig::LoadConfigFromFile] Opening /etc/enigmalight.conf [CConfig::BuildConfig] building config [CConfig::BuildConfig] built config successfully [main] Start device 1 from 2 [main] Start device 2 from 2 "CDevice::Process] hue: starting with output "python /usr/dreamWifiLight/dkhue.py [CDevice::Process] hue: setting up [CDevice::Process] ambilight: starting with output "/dev/ttyUSB0" [CDevice::Process] ambilight: setting up [CDevice::Process] hue: setup succeeded [CDevice::Process] ambilight: setup succeeded [CEnigmaLight::SetColorSequence]Set colorsequence to RGB set adjust 0 0 0 1[CFlagManager::SetVideoGamma] Gamma not set, using 2.2 since this is default for video [CMainLoop::Process] Starting grabber.. [CGrabber::Setup] Lights: 107, Cluster leds: 1 as one led [CGrabber::Setup] Channels: 321 [CGuiServer::Process] Start GuiServer [CGuiServer::Process] Opening listening socket for Enigma2 GUI on 127.0.0.1:6767 [CGrabber::Setup] Interval: 0.10 [CGrabber::Run] Mode -> Dynamic [CStb::DetectSTB] Detect STB-Type... [CStb::DetectSTB] Detected STB-Type: BCM7405 [CFrameGrabber::Setup] Open memory /dev/mem [CFrameGrabber::CheckRes] Set Scanrange to 90x67 (Source 1440x1080) [CGuiServer::Process] GuiClient 127.0.0.1:47753 connected successful. ': [Errno 2] No such file or directoryiLight/dkhue.py root@dm800se:~# python /usr/dreamWifiLight/dkhue.py ^CTraceback (most recent call last): File "/usr/dreamWifiLight/dkhue.py", line 159, in popen() File "/usr/dreamWifiLight/dkhue.py", line 17, in popen eingabe = sys.stdin.readline()