Micronucleus t85 V1.4.1: No USB avaliable

[pcfreak1201]

I have no idea if it is the Hardware, Bootloader or OSCAL: I played around with the new TinyCore on the t85 Digispark (Software Serial), but than no respond any more. (I can't remember if it was the first upload, what means exchange Bootloader from Micronucleus to TinyCore) I remember I changed BOD to off, because I want to use it with battery on 3.3V later on, and said: Burn Bootloader to change fuses. dmesg -wH said:

[  +0,323481] usb 1-9.3.2.3: new low-speed USB device number 70 using xhci_hcd
[  +0,180056] usb 1-9.3.2.3: device descriptor read/64, error -32
[  +0,743949] usb 1-9.3.2.3: device descriptor read/64, error -32
[  +0,287936] usb 1-9.3.2.3: new low-speed USB device number 71 using xhci_hcd
[  +0,184158] usb 1-9.3.2.3: device descriptor read/64, error -32
[  +0,287962] usb 1-9.3.2.3: device descriptor read/64, error -32
[  +0,108058] usb 1-9.3.2-port3: attempt power cycle
[  +0,703785] usb 1-9.3.2.3: new low-speed USB device number 72 using xhci_hcd
[  +0,000480] usb 1-9.3.2.3: Device not responding to setup address.
[  +0,208047] usb 1-9.3.2.3: Device not responding to setup address.
[  +0,207411] usb 1-9.3.2.3: device not accepting address 72, error -71
[  +0,179996] usb 1-9.3.2.3: new low-speed USB device number 73 using xhci_hcd
[  +0,000406] usb 1-9.3.2.3: Device not responding to setup address.
[  +0,208187] usb 1-9.3.2.3: Device not responding to setup address.
[  +0,207422] usb 1-9.3.2.3: device not accepting address 73, error -71
[  +0,000104] usb 1-9.3.2-port3: unable to enumerate USB device
[  +3,387723] usb 1-9.3.2.3: new low-speed USB device number 74 using xhci_hcd
[  +0,180126] usb 1-9.3.2.3: device descriptor read/64, error -32
[  +0,287858] usb 1-9.3.2.3: device descriptor read/64, error -32
[  +0,288060] usb 1-9.3.2.3: new low-speed USB device number 75 using xhci_hcd
[  +1,291972] usb 1-9.3.2.3: new low-speed USB device number 76 using xhci_hcd
[  +0,179984] usb 1-9.3.2.3: device descriptor read/64, error -32
[  +0,287838] usb 1-9.3.2.3: device descriptor read/64, error -32
[  +0,287976] usb 1-9.3.2.3: new low-speed USB device number 77 using xhci_hcd
[  +1,292076] usb 1-9.3.2.3: new low-speed USB device number 78 using xhci_hcd

and so on. So I tried to burn new bootloader with my new FASTUSBASP (Bluepill):

[  +0,331780] usb 1-9.3.2.4: new full-speed USB device number 92 using xhci_hcd
[  +0,201988] usb 1-9.3.2.4: New USB device found, idVendor=16c0, idProduct=05dc
[  +0,000005] usb 1-9.3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  +0,000004] usb 1-9.3.2.4: Product: fastusbasp
[  +0,000003] usb 1-9.3.2.4: Manufacturer: http://amitesh-singh.github.io
[  +0,000003] usb 1-9.3.2.4: SerialNumber: 879336635154
[  +0,001109] cdc_acm 1-9.3.2.4:1.0: ttyACM0: USB ACM device
[Jul31 23:29] usb 1-9.3.2.4: USB disconnect, device number 92
[  +0,342483] usb 1-9.3.2.4: new full-speed USB device number 93 using xhci_hcd
[  +0,202389] usb 1-9.3.2.4: New USB device found, idVendor=16c0, idProduct=05dc
[  +0,000006] usb 1-9.3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  +0,000003] usb 1-9.3.2.4: Product: fastusbasp
[  +0,000004] usb 1-9.3.2.4: Manufacturer: http://amitesh-singh.github.io
[  +0,000003] usb 1-9.3.2.4: SerialNumber: 879336635154
[  +0,001213] cdc_acm 1-9.3.2.4:1.0: ttyACM0: USB ACM device
[Jul31 23:31] usb 1-9.3.2.1: new low-speed USB device number 94 using xhci_hcd
[  +0,183903] usb 1-9.3.2.1: device descriptor read/64, error -32
[  +0,287957] usb 1-9.3.2.1: device descriptor read/64, error -32
[  +0,288111] usb 1-9.3.2.1: new low-speed USB device number 95 using xhci_hcd
[  +0,180035] usb 1-9.3.2.1: device descriptor read/64, error -32
[  +0,287828] usb 1-9.3.2.1: device descriptor read/64, error -32
[  +0,108173] usb 1-9.3.2-port1: attempt power cycle
[  +0,703958] usb 1-9.3.2.1: new low-speed USB device number 96 using xhci_hcd
[  +0,000475] usb 1-9.3.2.1: Device not responding to setup address.
[  +0,207953] usb 1-9.3.2.1: Device not responding to setup address.
[  +0,207510] usb 1-9.3.2.1: device not accepting address 96, error -71
[  +0,180020] usb 1-9.3.2.1: new low-speed USB device number 97 using xhci_hcd
[  +0,000400] usb 1-9.3.2.1: Device not responding to setup address.
[  +0,208019] usb 1-9.3.2.1: Device not responding to setup address.
[  +0,207447] usb 1-9.3.2.1: device not accepting address 97, error -71
[  +0,000060] usb 1-9.3.2-port1: unable to enumerate USB device
[Jul31 23:32] usb 1-9.3.2.4: USB disconnect, device number 93

The Setup was done by a SO8-Clamp on the Digispark t85 and it responds. But still no detection of the USB-Device. So I used the IDE to flash again:

/home/stefan/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude -C/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/avrdude.conf -v -pattiny85 -cusbasp -e -Uefuse:w:0xFE:m -Uhfuse:w:0b11011111:m -Ulfuse:w:0xF1:m -Uflash:w:/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/bootloaders/micronucleus/t85_entry_on_power_on_no_pullup_fast_exit_on_no_USB.hex:i 

avrdude: Version 6.3-20190619
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/avrdude.conf"
         User configuration file is "/home/stefan/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : usb
         Using Programmer              : usbasp
         Setting bit clk period        : 5.0
         AVR Part                      : ATtiny85
         Chip Erase delay              : 400000 us
         PAGEL                         : P00
         BS2                           : P00
         RESET disposition             : possible i/o
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    12     4    0 no        512    4      0  4000  4500 0xff 0xff
           flash         65    12    32    0 yes      8192   64    128 30000 30000 0xff 0xff
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00
           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           calibration    0     0     0    0 no          2    0      0     0     0 0x00 0x00

         Programmer Type : usbasp
         Description     : Any usbasp clone with correct VID/PID

avrdude: set SCK frequency to 187500 Hz
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e930b (probably t85)
avrdude: erasing chip
avrdude: set SCK frequency to 187500 Hz
avrdude: reading input file "0xFE"
avrdude: writing efuse (1 bytes):

Writing | ################################################## | 100% 0.00s

avrdude: 1 bytes of efuse written
avrdude: verifying efuse memory against 0xFE:
avrdude: load data efuse data from input file 0xFE:
avrdude: input file 0xFE contains 1 bytes
avrdude: reading on-chip efuse data:

Reading | ################################################## | 100% 0.00s

avrdude: verifying ...
avrdude: 1 bytes of efuse verified
avrdude: reading input file "0b11011111"
avrdude: writing hfuse (1 bytes):

Writing | ################################################## | 100% 0.00s

avrdude: 1 bytes of hfuse written
avrdude: verifying hfuse memory against 0b11011111:
avrdude: load data hfuse data from input file 0b11011111:
avrdude: input file 0b11011111 contains 1 bytes
avrdude: reading on-chip hfuse data:

Reading | ################################################## | 100% 0.00s

avrdude: verifying ...
avrdude: 1 bytes of hfuse verified
avrdude: reading input file "0xF1"
avrdude: writing lfuse (1 bytes):

Writing | ################################################## | 100% 0.00s

avrdude: 1 bytes of lfuse written
avrdude: verifying lfuse memory against 0xF1:
avrdude: load data lfuse data from input file 0xF1:
avrdude: input file 0xF1 contains 1 bytes
avrdude: reading on-chip lfuse data:

Reading | ################################################## | 100% 0.00s

avrdude: verifying ...
avrdude: 1 bytes of lfuse verified
avrdude: reading input file "/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/bootloaders/micronucleus/t85_entry_on_power_on_no_pullup_fast_exit_on_no_USB.hex"
avrdude: writing flash (8182 bytes):

Writing | ################################################## | 100% 0.00s

avrdude: 8182 bytes of flash written
avrdude: verifying flash memory against /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/bootloaders/micronucleus/t85_entry_on_power_on_no_pullup_fast_exit_on_no_USB.hex:
avrdude: load data flash data from input file /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/bootloaders/micronucleus/t85_entry_on_power_on_no_pullup_fast_exit_on_no_USB.hex:
avrdude: input file /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/bootloaders/micronucleus/t85_entry_on_power_on_no_pullup_fast_exit_on_no_USB.hex contains 8182 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.00s

avrdude: verifying ...
avrdude: 8182 bytes of flash verified

avrdude done.  Thank you. 

So again dmsg shows:

[Aug 1 02:03] usb 1-9.3.2.1: new low-speed USB device number 110 using xhci_hcd
[  +0,202326] usb 1-9.3.2.1: New USB device found, idVendor=16d0, idProduct=0753
[  +0,000006] usb 1-9.3.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  +0,244861] usb 1-9.3.2.1: USB disconnect, device number 110
[  +2,624583] usb 1-9.3.2.1: new low-speed USB device number 111 using xhci_hcd
[  +1,936008] usb 1-9.3.2-port1: Cannot enable. Maybe the USB cable is bad?
[  +0,179963] usb 1-9.3.2.1: new low-speed USB device number 112 using xhci_hcd
[  +1,931966] usb 1-9.3.2-port1: Cannot enable. Maybe the USB cable is bad?
[  +0,000052] usb 1-9.3.2-port1: attempt power cycle
[  +2,000033] usb 1-9.3.2-port1: Cannot enable. Maybe the USB cable is bad?
[  +0,179821] usb 1-9.3.2.1: new low-speed USB device number 114 using xhci_hcd
[  +0,000590] usb 1-9.3.2.1: Device not responding to setup address.
[  +0,208036] usb 1-9.3.2.1: Device not responding to setup address.
[  +0,207332] usb 1-9.3.2.1: device not accepting address 114, error -71
[  +0,000063] usb 1-9.3.2-port1: unable to enumerate USB device
[  +0,324081] usb 1-9.3.2.1: new low-speed USB device number 115 using xhci_hcd
[  +1,932005] usb 1-9.3.2-port1: Cannot enable. Maybe the USB cable is bad?
[  +0,179794] usb 1-9.3.2.1: new low-speed USB device number 116 using xhci_hcd
[  +1,932166] usb 1-9.3.2-port1: Cannot enable. Maybe the USB cable is bad?
[  +0,000061] usb 1-9.3.2-port1: attempt power cycle
[  +1,999853] usb 1-9.3.2-port1: Cannot enable. Maybe the USB cable is bad?
[  +0,179805] usb 1-9.3.2.1: new low-speed USB device number 118 using xhci_hcd
[  +0,000476] usb 1-9.3.2.1: Device not responding to setup address.
[  +0,207885] usb 1-9.3.2.1: Device not responding to setup address.

It's an external powered USB 2.0 HUB with switches I always use. I tried several cables and paper for preasure. Nothing works. When the hardware is faulty, OK I needn't USB for this project. But any other ideas, Tests?

[pcfreak1201]

I found an other Digispark. Only Upload the code works:

/mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/arduino-builder -dump-prefs -logger=machine -hardware /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/hardware -hardware /home/stefan/.arduino15/packages -tools /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/tools-builder -tools /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/hardware/tools/avr -tools /home/stefan/.arduino15/packages -built-in-libraries /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/libraries -libraries /home/stefan/Arduino/libraries -fqbn=ATTinyCore:avr:attinyx5micr:LTO=enable,TimerClockSource=default,sketchclock=165pll,bod=disable,millis=enabled,burnmode=install,resetpin=reset -ide-version=10812 -build-path /tmp/arduino_build_489234 -warnings=all -build-cache /tmp/arduino_cache_967378 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avrdude.path=/home/stefan/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=/home/stefan/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs=runtime.tools.micronucleus.path=/home/stefan/.arduino15/packages/ATTinyCore/tools/micronucleus/2.0a4 -prefs=runtime.tools.micronucleus-2.0a4.path=/home/stefan/.arduino15/packages/ATTinyCore/tools/micronucleus/2.0a4 -verbose /home/stefan/Arduino/Blink_t85/Blink_t85.ino
/mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/arduino-builder -compile -logger=machine -hardware /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/hardware -hardware /home/stefan/.arduino15/packages -tools /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/tools-builder -tools /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/hardware/tools/avr -tools /home/stefan/.arduino15/packages -built-in-libraries /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/libraries -libraries /home/stefan/Arduino/libraries -fqbn=ATTinyCore:avr:attinyx5micr:LTO=enable,TimerClockSource=default,sketchclock=165pll,bod=disable,millis=enabled,burnmode=install,resetpin=reset -ide-version=10812 -build-path /tmp/arduino_build_489234 -warnings=all -build-cache /tmp/arduino_cache_967378 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avrdude.path=/home/stefan/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=/home/stefan/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs=runtime.tools.micronucleus.path=/home/stefan/.arduino15/packages/ATTinyCore/tools/micronucleus/2.0a4 -prefs=runtime.tools.micronucleus-2.0a4.path=/home/stefan/.arduino15/packages/ATTinyCore/tools/micronucleus/2.0a4 -verbose /home/stefan/Arduino/Blink_t85/Blink_t85.ino
Using board 'attinyx5micr' from platform in folder: /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1
Using core 'tiny' from platform in folder: /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1
Detecting libraries used...
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /tmp/arduino_build_489234/sketch/Blink_t85.ino.cpp -o /dev/null
Generating function prototypes...
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /tmp/arduino_build_489234/sketch/Blink_t85.ino.cpp -o /tmp/arduino_build_489234/preproc/ctags_target_for_gcc_minus_e.cpp
/mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/tools-builder/ctags/5.8-arduino11/ctags -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives /tmp/arduino_build_489234/preproc/ctags_target_for_gcc_minus_e.cpp
Sketch wird kompiliert...
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /tmp/arduino_build_489234/sketch/Blink_t85.ino.cpp -o /tmp/arduino_build_489234/sketch/Blink_t85.ino.cpp.o
Compiling libraries...
Compiling core...
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -x assembler-with-cpp -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/wiring_pulse.S -o /tmp/arduino_build_489234/core/wiring_pulse.S.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/WInterrupts.c -o /tmp/arduino_build_489234/core/WInterrupts.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/wiring.c -o /tmp/arduino_build_489234/core/wiring.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/wiring_analog.c -o /tmp/arduino_build_489234/core/wiring_analog.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/wiring_digital.c -o /tmp/arduino_build_489234/core/wiring_digital.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/wiring_pulse.c -o /tmp/arduino_build_489234/core/wiring_pulse.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/wiring_shift.c -o /tmp/arduino_build_489234/core/wiring_shift.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/HardwareSerial.cpp -o /tmp/arduino_build_489234/core/HardwareSerial.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/Print.cpp -o /tmp/arduino_build_489234/core/Print.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/Stream.cpp -o /tmp/arduino_build_489234/core/Stream.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/TinySoftwareSerial.cpp -o /tmp/arduino_build_489234/core/TinySoftwareSerial.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/Tone.cpp -o /tmp/arduino_build_489234/core/Tone.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/WMath.cpp -o /tmp/arduino_build_489234/core/WMath.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/WString.cpp -o /tmp/arduino_build_489234/core/WString.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/abi.cpp -o /tmp/arduino_build_489234/core/abi.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/main.cpp -o /tmp/arduino_build_489234/core/main.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/new.cpp -o /tmp/arduino_build_489234/core/new.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/wiring_pulse.S.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/WInterrupts.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/wiring.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/wiring_analog.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/wiring_digital.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/wiring_pulse.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/wiring_shift.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/HardwareSerial.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/Print.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/Stream.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/TinySoftwareSerial.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/Tone.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/WMath.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/WString.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/abi.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/main.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/new.cpp.o
Gebauter Kern wird archiviert (zwischengespeichert) in: /tmp/arduino_cache_967378/core/core_d8344d8fe03438871aa814bf022d38f0.a
Linking everything together...
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -Wall -Wextra -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=attiny85 -o /tmp/arduino_build_489234/Blink_t85.ino.elf /tmp/arduino_build_489234/sketch/Blink_t85.ino.cpp.o /tmp/arduino_build_489234/core/core.a -L/tmp/arduino_build_489234 -lm
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-objcopy -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 /tmp/arduino_build_489234/Blink_t85.ino.elf /tmp/arduino_build_489234/Blink_t85.ino.eep
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-objcopy -O ihex -R .eeprom /tmp/arduino_build_489234/Blink_t85.ino.elf /tmp/arduino_build_489234/Blink_t85.ino.hex
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-size -A /tmp/arduino_build_489234/Blink_t85.ino.elf
Der Sketch verwendet 666 Bytes (10%) des Programmspeicherplatzes. Das Maximum sind 6586 Bytes.
Globale Variablen verwenden 9 Bytes (1%) des dynamischen Speichers, 503 Bytes für lokale Variablen verbleiben. Das Maximum sind 512 Bytes.
/home/stefan/.arduino15/packages/ATTinyCore/tools/micronucleus/2.0a4/launcher -cdigispark --timeout 60 -Uflash:w:/tmp/arduino_build_489234/Blink_t85.ino.hex:i 
Running Digispark Uploader...
Plug in device now... (will timeout in 60 seconds)
> Please plug in the device ... 
> Press CTRL+C to terminate the program.
> Device is found!
connecting: 16% complete
connecting: 22% complete
connecting: 28% complete
connecting: 33% complete
> Device has firmware version 1.6
> Available space for user applications: 6012 bytes
> Suggested sleep time between sending pages: 8ms
> Whole page count: 94  page size: 64
> Erase function sleep duration: 752ms
parsing: 50% complete
> Erasing the memory ...
erasing: 55% complete
erasing: 60% complete
erasing: 65% complete
> Starting to upload ...
writing: 70% complete
writing: 75% complete
writing: 80% complete
> Starting the user app ...
running: 100% complete
>> Micronucleus done. Thank you!

I pressed burn Bootloader:

/home/stefan/.arduino15/packages/ATTinyCore/tools/micronucleus/2.0a4/launcher -cdigispark --timeout 60 -Uflash:w:/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/bootloaders/micronucleus/upgrade-t85_entry_on_power_on_no_pullup_fast_exit_on_no_USB.hex:i Running Digispark Uploader... Plug in device now... (will timeout in 60 seconds)

Please plug in the device ... Press CTRL+C to terminate the program. Device is found! connecting: 16% complete connecting: 22% complete connecting: 28% complete connecting: 33% complete Device has firmware version 1.6 Available space for user applications: 6012 bytes Suggested sleep time between sending pages: 8ms Whole page count: 94 page size: 64 Erase function sleep duration: 752ms parsing: 50% complete Erasing the memory ... erasing: 55% complete erasing: 60% complete erasing: 65% complete Starting to upload ... writing: 70% complete writing: 75% complete writing: 80% complete Starting the user app ... running: 100% complete

Micronucleus done. Thank you!

OK, seems to be defective hardware, this board works still:

/mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/arduino-builder -dump-prefs -logger=machine -hardware /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/hardware -hardware /home/stefan/.arduino15/packages -tools /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/tools-builder -tools /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/hardware/tools/avr -tools /home/stefan/.arduino15/packages -built-in-libraries /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/libraries -libraries /home/stefan/Arduino/libraries -fqbn=ATTinyCore:avr:attinyx5micr:LTO=enable,TimerClockSource=default,sketchclock=165pll,bod=disable,millis=enabled,burnmode=upgrade,resetpin=reset -ide-version=10812 -build-path /tmp/arduino_build_489234 -warnings=all -build-cache /tmp/arduino_cache_967378 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avrdude.path=/home/stefan/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=/home/stefan/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs=runtime.tools.micronucleus.path=/home/stefan/.arduino15/packages/ATTinyCore/tools/micronucleus/2.0a4 -prefs=runtime.tools.micronucleus-2.0a4.path=/home/stefan/.arduino15/packages/ATTinyCore/tools/micronucleus/2.0a4 -verbose /home/stefan/Arduino/Blink_t85/Blink_t85.ino
/mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/arduino-builder -compile -logger=machine -hardware /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/hardware -hardware /home/stefan/.arduino15/packages -tools /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/tools-builder -tools /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/hardware/tools/avr -tools /home/stefan/.arduino15/packages -built-in-libraries /mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/libraries -libraries /home/stefan/Arduino/libraries -fqbn=ATTinyCore:avr:attinyx5micr:LTO=enable,TimerClockSource=default,sketchclock=165pll,bod=disable,millis=enabled,burnmode=upgrade,resetpin=reset -ide-version=10812 -build-path /tmp/arduino_build_489234 -warnings=all -build-cache /tmp/arduino_cache_967378 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7 -prefs=runtime.tools.avrdude.path=/home/stefan/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=/home/stefan/.arduino15/packages/arduino/tools/avrdude/6.3.0-arduino17 -prefs=runtime.tools.micronucleus.path=/home/stefan/.arduino15/packages/ATTinyCore/tools/micronucleus/2.0a4 -prefs=runtime.tools.micronucleus-2.0a4.path=/home/stefan/.arduino15/packages/ATTinyCore/tools/micronucleus/2.0a4 -verbose /home/stefan/Arduino/Blink_t85/Blink_t85.ino
Using board 'attinyx5micr' from platform in folder: /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1
Using core 'tiny' from platform in folder: /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1
Detecting libraries used...
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /tmp/arduino_build_489234/sketch/Blink_t85.ino.cpp -o /dev/null
Generating function prototypes...
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /tmp/arduino_build_489234/sketch/Blink_t85.ino.cpp -o /tmp/arduino_build_489234/preproc/ctags_target_for_gcc_minus_e.cpp
/mnt/6b436730-93b8-4876-95df-6252fb014c4a/arduino-1.8.12/tools-builder/ctags/5.8-arduino11/ctags -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives /tmp/arduino_build_489234/preproc/ctags_target_for_gcc_minus_e.cpp
Sketch wird kompiliert...
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /tmp/arduino_build_489234/sketch/Blink_t85.ino.cpp -o /tmp/arduino_build_489234/sketch/Blink_t85.ino.cpp.o
Compiling libraries...
Compiling core...
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -x assembler-with-cpp -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/wiring_pulse.S -o /tmp/arduino_build_489234/core/wiring_pulse.S.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/WInterrupts.c -o /tmp/arduino_build_489234/core/WInterrupts.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/wiring.c -o /tmp/arduino_build_489234/core/wiring.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/wiring_analog.c -o /tmp/arduino_build_489234/core/wiring_analog.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/wiring_digital.c -o /tmp/arduino_build_489234/core/wiring_digital.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/wiring_pulse.c -o /tmp/arduino_build_489234/core/wiring_pulse.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -c -g -Os -Wall -Wextra -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/wiring_shift.c -o /tmp/arduino_build_489234/core/wiring_shift.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/HardwareSerial.cpp -o /tmp/arduino_build_489234/core/HardwareSerial.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/Print.cpp -o /tmp/arduino_build_489234/core/Print.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/Stream.cpp -o /tmp/arduino_build_489234/core/Stream.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/TinySoftwareSerial.cpp -o /tmp/arduino_build_489234/core/TinySoftwareSerial.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/Tone.cpp -o /tmp/arduino_build_489234/core/Tone.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/WMath.cpp -o /tmp/arduino_build_489234/core/WMath.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/WString.cpp -o /tmp/arduino_build_489234/core/WString.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/abi.cpp -o /tmp/arduino_build_489234/core/abi.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/main.cpp -o /tmp/arduino_build_489234/core/main.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-g++ -c -g -Os -Wall -Wextra -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=attiny85 -DF_CPU=16500000L -DCLOCK_SOURCE=6 -DARDUINO=10812 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR -DNEOPIXELPORT=PORTB -DHASUSB -DBOOTTUNED165 -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny -I/home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/variants/tinyX5 /home/stefan/.arduino15/packages/ATTinyCore/hardware/avr/1.4.1/cores/tiny/new.cpp -o /tmp/arduino_build_489234/core/new.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/wiring_pulse.S.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/WInterrupts.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/wiring.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/wiring_analog.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/wiring_digital.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/wiring_pulse.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/wiring_shift.c.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/HardwareSerial.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/Print.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/Stream.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/TinySoftwareSerial.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/Tone.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/WMath.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/WString.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/abi.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/main.cpp.o
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc-ar rcs /tmp/arduino_build_489234/core/core.a /tmp/arduino_build_489234/core/new.cpp.o
Gebauter Kern wird archiviert (zwischengespeichert) in: /tmp/arduino_cache_967378/core/core_0382bad5076ba7033ac7431d3e414260.a
Linking everything together...
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-gcc -Wall -Wextra -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=attiny85 -o /tmp/arduino_build_489234/Blink_t85.ino.elf /tmp/arduino_build_489234/sketch/Blink_t85.ino.cpp.o /tmp/arduino_build_489234/core/core.a -L/tmp/arduino_build_489234 -lm
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-objcopy -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 /tmp/arduino_build_489234/Blink_t85.ino.elf /tmp/arduino_build_489234/Blink_t85.ino.eep
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-objcopy -O ihex -R .eeprom /tmp/arduino_build_489234/Blink_t85.ino.elf /tmp/arduino_build_489234/Blink_t85.ino.hex
/home/stefan/.arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/bin/avr-size -A /tmp/arduino_build_489234/Blink_t85.ino.elf
Der Sketch verwendet 666 Bytes (10%) des Programmspeicherplatzes. Das Maximum sind 6586 Bytes.
Globale Variablen verwenden 9 Bytes (1%) des dynamischen Speichers, 503 Bytes für lokale Variablen verbleiben. Das Maximum sind 512 Bytes.
/home/stefan/.arduino15/packages/ATTinyCore/tools/micronucleus/2.0a4/launcher -cdigispark --timeout 60 -Uflash:w:/tmp/arduino_build_489234/Blink_t85.ino.hex:i 
Running Digispark Uploader...
Plug in device now... (will timeout in 60 seconds)
> Please plug in the device ... 
> Press CTRL+C to terminate the program.
> Device is found!
connecting: 16% complete
connecting: 22% complete
connecting: 28% complete
connecting: 33% complete
> Device has firmware version 2.5
> Device signature: 0x1e930b 
> Available space for user applications: 6586 bytes
> Suggested sleep time between sending pages: 7ms
> Whole page count: 103  page size: 64
> Erase function sleep duration: 721ms
parsing: 50% complete
> Erasing the memory ...
erasing: 55% complete
erasing: 60% complete
erasing: 65% complete
> Starting to upload ...
writing: 70% complete
writing: 75% complete
writing: 80% complete
> Starting the user app ...
running: 100% complete
>> Micronucleus done. Thank you!

[pcfreak1201]

Seems to be a hardware fault...