search

SpenceKonde / DxCore

Arduino core for AVR DA, DB, DD, EA and future DU-series parts - Microchip's latest and greatest AVRs. Library maintainers: Porting help and adviccee is available.
Other
181 stars 47 forks source link

program avr128da28 chip using arduino uno as a programmer #525

Open hoka83 opened 4 months ago

hoka83 commented 4 months ago

hello does jtag2updi support avr128da28 to be programmed by arduino uno? , i want to program avr128da28 chip using arduino uno as a programmer, can anyone provide me steps to do that

pcfreak1201 commented 4 months ago

Hi! Spence doesn't support jtag2updi any more. You can try to use avrdude directly. There should be support for the avr12da28 since version 7.2. You should give SerialUPDI a try: https://github.com/SpenceKonde/DxCore/blob/master/README.md#updi-programming-hardware

hoka83 commented 4 months ago

Hi! Spence doesn't support jtag2updi any more. You can try to use avrdude directly. There should be support for the avr12da28 since version 7.2. You should give SerialUPDI a try: https://github.com/SpenceKonde/DxCore/blob/master/README.md#updi-programming-hardware

i watched this video on youtube which Program an AVR DA MCU Using an Arduino Nano but in my case i have AVR128DA28 chip and arduino uno , i connected the pins as the same he did and it gave me error while burning the boatloader

i am just connecting arduino uno as a programmer for AVR128DA chip using updi and it gives me this error:

avrdude: jtagmkII_initialize(): Cannot locate "flash" and "boot" memories in description avrdude: jtagmkII_program_enable(): bad response to enter progmode command: RSP_ILLEGAL_MCU_STATE avrdude: jtagmkII_program_enable(): bad response to enter progmode command: RSP_ILLEGAL_MCU_STATE avrdude: jtagmkII_read_byte(): bad response to read memory command: RSP_ILLEGAL_MCU_STATE avr_read(): error reading address 0x0000 read operation not supported for memory "signature" avrdude: error reading signature data for part "AVR128DA28", rc=-2 avrdude: error reading signature data, rc=-2 avrdude: jtagmkII_program_disable(): bad response to leave progmode command: RSP_ILLEGAL_MCU_STATE Error while burning bootloader. IMG_6061 (1) IMG_6060

hardware connection

hoka83 commented 4 months ago

this method worked fine in the video just i watched on youtube and i did the same thing and connections but just with arduino uno and avr128DA28 chip

nomakewan commented 1 month ago

Looks like you have voltage connected to 3.3V instead of 5V even though the logic level outputs on your Uno are 5V? Any particular reason you did that?

We also can't diagnose any potential connection issues to your AVR128DB28 because your photo does not show us that chip, there are no labels on where the wires are going into the green PCB, and you have not provided a schematic of that board.