search

StealthChesnut / HA-FoxESS-Modbus

Home Assistant Modbus Integration setup for Fox ESS H1 and AC Inverters
79 stars 37 forks source link

Tried to set this up but keep getting errors #64

Closed Thebig24fan closed 1 year ago

Thebig24fan commented 2 years ago

Tried setting this up and put ip that’s on inverter but keep’s failing to connect, how do I check its real ip ? I’ve tried connecting laptop to same lan lead and getting 50 meg bb so not as connecting problem even followed the YouTube video done today no luck spent countless hours trying to get this to work please help thanks Error message I get is Logger: pymodbus.client.sync Source: components/modbus/modbus.py:386 First occurred: 19:51:35 (251 occurrences) Last logged: 19:57:59

Connection to (192.168.0.043, 502) failed: timed out Connection to (192.168.0.043, 502) failed: [Errno 113] Host is unreachable

And at startup

Logger: homeassistant.components.integration.sensor Source: components/integration/sensor.py:184 Integration: integration (documentation, issues) First occurred: 19:51:27 (8 occurrences) Last logged: 19:51:27

sensor.load_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_charge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_discharge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.feedin_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.grid_consumption_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>]

Running Home Assistant 2022.11.5 Supervisor 2022.11.2 Operating System 9.3 Frontend 20221108.0 - latest

but had issues been trying since 2022 11 ish tried to restore back to 10.5 but won’t restore properly so can’t go back before 11.2 but even had problems on 10.5 on both modbus and fox cloud hacs add on

tagware commented 2 years ago

Morning,

You might want to check the IP number. As the format normally doesn't have the 0 in front of the 43 and might upset IP stack.

192.168.0.043 should be 192.168.0.43

In fact if you use PING command at the MSDOS CMD prompt. It will not see an active device when you add 192.168.0.043 instead of 192.168.0.43 :o)

You may have been mislead as the actual Fox ESS invertor control panel displays 192.168.000.043.

If you use 192.168.000.26 that works. Computers !

Regards David Vincent Mobile: 07785 114965

Website: www.tagware.co.uk http://www.tagware.co.uk/ *Blog: *blog.tagware.co.uk http://tagware.info/

http://www.tagware.co.uk/ *13 Sandersfield Road, Banstead, Surrey,SM7 2DH. Registered No: 03006925 England. - wacky.battle.blaze https://map.what3words.com/wacky.battle.blaze *

This e-mail contains confidential information and is for the exclusive use of the addressee's. If you are not the addressee, then any distribution, copying or use of this e-mail is prohibited. If received in error, please advise the sender and delete it immediately. We accept no liability for any loss or damage suffered by any person arising from the use of this e-mail. How we use your data can be viewed here https://tagware.co.uk/privacy-policy/

On Thu, 1 Dec 2022 at 21:13, Thebig24fan @.***> wrote:

Tried setting this up and put ip that’s on inverter but keep’s failing to connect, how do I check its real ip ? I’ve tried connecting laptop to same lan lead and getting 50 meg bb so not as connecting problem even followed the YouTube video done today no luck spent countless hours trying to get this to work please help thanks Error message I get is Logger: pymodbus.client.sync Source: components/modbus/modbus.py:386 First occurred: 19:51:35 (251 occurrences) Last logged: 19:57:59

Connection to (192.168.0.043, 502) failed: timed out Connection to (192.168.0.043, 502) failed: [Errno 113] Host is unreachable

And at startup

Logger: homeassistant.components.integration.sensor Source: components/integration/sensor.py:184 Integration: integration (documentation, issues) First occurred: 19:51:27 (8 occurrences) Last logged: 19:51:27

sensor.load_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_charge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_discharge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.feedin_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.grid_consumption_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>]

Running Home Assistant 2022.11.5 Supervisor 2022.11.2 Operating System 9.3 Frontend 20221108.0 - latest

but had issues been trying since 2022 11 ish tried to restore back to 10.5 but won’t restore properly so can’t go back before 11.2 but even had problems on 10.5 on both modbus and fox cloud hacs add on

— Reply to this email directly, view it on GitHub https://github.com/StealthChesnut/HA-FoxESS-Modbus/issues/64, or unsubscribe https://github.com/notifications/unsubscribe-auth/AG3GF23SPJCB7Z77RGZJKYTWLEIDDANCNFSM6AAAAAASRHCPKM . You are receiving this because you are subscribed to this thread.Message ID: @.***>

Thebig24fan commented 2 years ago

Ok thanks I’ll try that . Tried 192.168.000.043 and still got same response so thought not seen ip 3 000 before I after getting no response I’ll try 0

Sent from Outlook for iOShttps://aka.ms/o0ukef

From: tagware @.> Sent: Friday, December 2, 2022 8:36:39 AM To: StealthChesnut/HA-FoxESS-Modbus @.> Cc: Thebig24fan @.>; Author @.> Subject: Re: [StealthChesnut/HA-FoxESS-Modbus] Tried to set this up but keep getting errors (Issue #64)

Morning,

You might want to check the IP number. As the format normally doesn't have the 0 in front of the 43 and might upset IP stack.

192.168.0.043 should be 192.168.0.43

In fact if you use PING command at the MSDOS CMD prompt. It will not see an active device when you add 192.168.0.043 instead of 192.168.0.43 :o)

You may have been mislead as the actual Fox ESS invertor control panel displays 192.168.000.043.

If you use 192.168.000.26 that works. Computers !

Regards David Vincent Mobile: 07785 114965

Website: www.tagware.co.uk http://www.tagware.co.uk/ *Blog: *blog.tagware.co.uk http://tagware.info/

http://www.tagware.co.uk/ *13 Sandersfield Road, Banstead, Surrey,SM7 2DH. Registered No: 03006925 England. - wacky.battle.blaze https://map.what3words.com/wacky.battle.blaze *

This e-mail contains confidential information and is for the exclusive use of the addressee's. If you are not the addressee, then any distribution, copying or use of this e-mail is prohibited. If received in error, please advise the sender and delete it immediately. We accept no liability for any loss or damage suffered by any person arising from the use of this e-mail. How we use your data can be viewed here https://tagware.co.uk/privacy-policy/

On Thu, 1 Dec 2022 at 21:13, Thebig24fan @.***> wrote:

Tried setting this up and put ip that’s on inverter but keep’s failing to connect, how do I check its real ip ? I’ve tried connecting laptop to same lan lead and getting 50 meg bb so not as connecting problem even followed the YouTube video done today no luck spent countless hours trying to get this to work please help thanks Error message I get is Logger: pymodbus.client.sync Source: components/modbus/modbus.py:386 First occurred: 19:51:35 (251 occurrences) Last logged: 19:57:59

Connection to (192.168.0.043, 502) failed: timed out Connection to (192.168.0.043, 502) failed: [Errno 113] Host is unreachable

And at startup

Logger: homeassistant.components.integration.sensor Source: components/integration/sensor.py:184 Integration: integration (documentation, issues) First occurred: 19:51:27 (8 occurrences) Last logged: 19:51:27

sensor.load_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_charge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_discharge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.feedin_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.grid_consumption_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>]

Running Home Assistant 2022.11.5 Supervisor 2022.11.2 Operating System 9.3 Frontend 20221108.0 - latest

but had issues been trying since 2022 11 ish tried to restore back to 10.5 but won’t restore properly so can’t go back before 11.2 but even had problems on 10.5 on both modbus and fox cloud hacs add on

— Reply to this email directly, view it on GitHub https://github.com/StealthChesnut/HA-FoxESS-Modbus/issues/64, or unsubscribe https://github.com/notifications/unsubscribe-auth/AG3GF23SPJCB7Z77RGZJKYTWLEIDDANCNFSM6AAAAAASRHCPKM . You are receiving this because you are subscribed to this thread.Message ID: @.***>

— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FStealthChesnut%2FHA-FoxESS-Modbus%2Fissues%2F64%23issuecomment-1334909325&data=05%7C01%7C%7Cb519ddd064f140a8b04308dad4405576%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638055670014200288%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ojYR7ZSXIgct%2FYYaQLqF2RHl%2FlLoebnGmjXRijCiO%2BM%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FATWXQTRXF7MLM6HUYOK6COLWLGYJPANCNFSM6AAAAAASRHCPKM&data=05%7C01%7C%7Cb519ddd064f140a8b04308dad4405576%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638055670014200288%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=0Uf8lTKDWf2QJfbrsIQ9%2FpZufkr5KrsVtWlAO8L%2FRhk%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.***>

Thebig24fan commented 2 years ago

Wow got it working thanks a lot

From the desk of Nickie

From: NICKIE Redshaw @.> Sent: Friday, December 2, 2022 11:18:36 AM To: StealthChesnut/HA-FoxESS-Modbus @.>; StealthChesnut/HA-FoxESS-Modbus @.> Cc: Author @.> Subject: Re: [StealthChesnut/HA-FoxESS-Modbus] Tried to set this up but keep getting errors (Issue #64)

Ok thanks I’ll try that . Tried 192.168.000.043 and still got same response so thought not seen ip 3 000 before I after getting no response I’ll try 0

Sent from Outlook for iOShttps://aka.ms/o0ukef

From: tagware @.> Sent: Friday, December 2, 2022 8:36:39 AM To: StealthChesnut/HA-FoxESS-Modbus @.> Cc: Thebig24fan @.>; Author @.> Subject: Re: [StealthChesnut/HA-FoxESS-Modbus] Tried to set this up but keep getting errors (Issue #64)

Morning,

You might want to check the IP number. As the format normally doesn't have the 0 in front of the 43 and might upset IP stack.

192.168.0.043 should be 192.168.0.43

In fact if you use PING command at the MSDOS CMD prompt. It will not see an active device when you add 192.168.0.043 instead of 192.168.0.43 :o)

You may have been mislead as the actual Fox ESS invertor control panel displays 192.168.000.043.

If you use 192.168.000.26 that works. Computers !

Regards David Vincent Mobile: 07785 114965

Website: www.tagware.co.uk http://www.tagware.co.uk/ *Blog: *blog.tagware.co.uk http://tagware.info/

http://www.tagware.co.uk/ *13 Sandersfield Road, Banstead, Surrey,SM7 2DH. Registered No: 03006925 England. - wacky.battle.blaze https://map.what3words.com/wacky.battle.blaze *

This e-mail contains confidential information and is for the exclusive use of the addressee's. If you are not the addressee, then any distribution, copying or use of this e-mail is prohibited. If received in error, please advise the sender and delete it immediately. We accept no liability for any loss or damage suffered by any person arising from the use of this e-mail. How we use your data can be viewed here https://tagware.co.uk/privacy-policy/

On Thu, 1 Dec 2022 at 21:13, Thebig24fan @.***> wrote:

Tried setting this up and put ip that’s on inverter but keep’s failing to connect, how do I check its real ip ? I’ve tried connecting laptop to same lan lead and getting 50 meg bb so not as connecting problem even followed the YouTube video done today no luck spent countless hours trying to get this to work please help thanks Error message I get is Logger: pymodbus.client.sync Source: components/modbus/modbus.py:386 First occurred: 19:51:35 (251 occurrences) Last logged: 19:57:59

Connection to (192.168.0.043, 502) failed: timed out Connection to (192.168.0.043, 502) failed: [Errno 113] Host is unreachable

And at startup

Logger: homeassistant.components.integration.sensor Source: components/integration/sensor.py:184 Integration: integration (documentation, issues) First occurred: 19:51:27 (8 occurrences) Last logged: 19:51:27

sensor.load_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_charge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_discharge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.feedin_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.grid_consumption_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>]

Running Home Assistant 2022.11.5 Supervisor 2022.11.2 Operating System 9.3 Frontend 20221108.0 - latest

but had issues been trying since 2022 11 ish tried to restore back to 10.5 but won’t restore properly so can’t go back before 11.2 but even had problems on 10.5 on both modbus and fox cloud hacs add on

— Reply to this email directly, view it on GitHub https://github.com/StealthChesnut/HA-FoxESS-Modbus/issues/64, or unsubscribe https://github.com/notifications/unsubscribe-auth/AG3GF23SPJCB7Z77RGZJKYTWLEIDDANCNFSM6AAAAAASRHCPKM . You are receiving this because you are subscribed to this thread.Message ID: @.***>

— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FStealthChesnut%2FHA-FoxESS-Modbus%2Fissues%2F64%23issuecomment-1334909325&data=05%7C01%7C%7Cb519ddd064f140a8b04308dad4405576%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638055670014200288%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ojYR7ZSXIgct%2FYYaQLqF2RHl%2FlLoebnGmjXRijCiO%2BM%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FATWXQTRXF7MLM6HUYOK6COLWLGYJPANCNFSM6AAAAAASRHCPKM&data=05%7C01%7C%7Cb519ddd064f140a8b04308dad4405576%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638055670014200288%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=0Uf8lTKDWf2QJfbrsIQ9%2FpZufkr5KrsVtWlAO8L%2FRhk%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.***>

tagware commented 2 years ago

Great to hear. :o)

Regards David Vincent Mobile: 07785 114965

Website: www.tagware.co.uk http://www.tagware.co.uk/ *Blog: *blog.tagware.co.uk http://tagware.info/

http://www.tagware.co.uk/ *13 Sandersfield Road, Banstead, Surrey,SM7 2DH. Registered No: 03006925 England. - wacky.battle.blaze https://map.what3words.com/wacky.battle.blaze *

This e-mail contains confidential information and is for the exclusive use of the addressee's. If you are not the addressee, then any distribution, copying or use of this e-mail is prohibited. If received in error, please advise the sender and delete it immediately. We accept no liability for any loss or damage suffered by any person arising from the use of this e-mail. How we use your data can be viewed here https://tagware.co.uk/privacy-policy/

On Fri, 2 Dec 2022 at 12:12, Thebig24fan @.***> wrote:

Wow got it working thanks a lot

From the desk of Nickie

From: NICKIE Redshaw @.> Sent: Friday, December 2, 2022 11:18:36 AM To: StealthChesnut/HA-FoxESS-Modbus @.>; StealthChesnut/HA-FoxESS-Modbus @.> Cc: Author @.> Subject: Re: [StealthChesnut/HA-FoxESS-Modbus] Tried to set this up but keep getting errors (Issue #64)

Ok thanks I’ll try that . Tried 192.168.000.043 and still got same response so thought not seen ip 3 000 before I after getting no response I’ll try 0

Sent from Outlook for iOShttps://aka.ms/o0ukef

From: tagware @.> Sent: Friday, December 2, 2022 8:36:39 AM To: StealthChesnut/HA-FoxESS-Modbus @.> Cc: Thebig24fan @.>; Author @.> Subject: Re: [StealthChesnut/HA-FoxESS-Modbus] Tried to set this up but keep getting errors (Issue #64)

Morning,

You might want to check the IP number. As the format normally doesn't have the 0 in front of the 43 and might upset IP stack.

192.168.0.043 should be 192.168.0.43

In fact if you use PING command at the MSDOS CMD prompt. It will not see an active device when you add 192.168.0.043 instead of 192.168.0.43 :o)

You may have been mislead as the actual Fox ESS invertor control panel displays 192.168.000.043.

If you use 192.168.000.26 that works. Computers !

Regards David Vincent Mobile: 07785 114965

Website: www.tagware.co.uk http://www.tagware.co.uk/ *Blog: *blog.tagware.co.uk http://tagware.info/

http://www.tagware.co.uk/ *13 Sandersfield Road, Banstead, Surrey,SM7 2DH. Registered No: 03006925 England. - wacky.battle.blaze https://map.what3words.com/wacky.battle.blaze *

This e-mail contains confidential information and is for the exclusive use of the addressee's. If you are not the addressee, then any distribution, copying or use of this e-mail is prohibited. If received in error, please advise the sender and delete it immediately. We accept no liability for any loss or damage suffered by any person arising from the use of this e-mail. How we use your data can be viewed here https://tagware.co.uk/privacy-policy/

On Thu, 1 Dec 2022 at 21:13, Thebig24fan @.***> wrote:

Tried setting this up and put ip that’s on inverter but keep’s failing to connect, how do I check its real ip ? I’ve tried connecting laptop to same lan lead and getting 50 meg bb so not as connecting problem even followed the YouTube video done today no luck spent countless hours trying to get this to work please help thanks Error message I get is Logger: pymodbus.client.sync Source: components/modbus/modbus.py:386 First occurred: 19:51:35 (251 occurrences) Last logged: 19:57:59

Connection to (192.168.0.043, 502) failed: timed out Connection to (192.168.0.043, 502) failed: [Errno 113] Host is unreachable

And at startup

Logger: homeassistant.components.integration.sensor Source: components/integration/sensor.py:184 Integration: integration (documentation, issues) First occurred: 19:51:27 (8 occurrences) Last logged: 19:51:27

sensor.load_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_charge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_discharge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.feedin_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.grid_consumption_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>]

Running Home Assistant 2022.11.5 Supervisor 2022.11.2 Operating System 9.3 Frontend 20221108.0 - latest

but had issues been trying since 2022 11 ish tried to restore back to 10.5 but won’t restore properly so can’t go back before 11.2 but even had problems on 10.5 on both modbus and fox cloud hacs add on

— Reply to this email directly, view it on GitHub https://github.com/StealthChesnut/HA-FoxESS-Modbus/issues/64, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AG3GF23SPJCB7Z77RGZJKYTWLEIDDANCNFSM6AAAAAASRHCPKM

. You are receiving this because you are subscribed to this thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FStealthChesnut%2FHA-FoxESS-Modbus%2Fissues%2F64%23issuecomment-1334909325&data=05%7C01%7C%7Cb519ddd064f140a8b04308dad4405576%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638055670014200288%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ojYR7ZSXIgct%2FYYaQLqF2RHl%2FlLoebnGmjXRijCiO%2BM%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FATWXQTRXF7MLM6HUYOK6COLWLGYJPANCNFSM6AAAAAASRHCPKM&data=05%7C01%7C%7Cb519ddd064f140a8b04308dad4405576%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638055670014200288%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=0Uf8lTKDWf2QJfbrsIQ9%2FpZufkr5KrsVtWlAO8L%2FRhk%3D&reserved=0

. You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/StealthChesnut/HA-FoxESS-Modbus/issues/64#issuecomment-1335147693, or unsubscribe https://github.com/notifications/unsubscribe-auth/AG3GF27NTIQCBN6UD64UXU3WLHROVANCNFSM6AAAAAASRHCPKM . You are receiving this because you commented.Message ID: @.***>

Thebig24fan commented 2 years ago

thanks for your swift and great help tried for about 2 weeks and about 12 + hours to get this to work with no joy untill you found the error that i couldn't find the solution too . all i need now is to get ha onto my laptop hard drive instead of on usb another thing spent hours with no joy even after following lots of how to guides and viedos all get odd issues.

tagware commented 2 years ago

Is that a request for me to provide links to how to do that?

Basically you run an Virtual environment on the laptop.

https://www.virtualbox.org/

Oracle VBox. You can find YouTube on installing HA on VirtualBox. Then, once you have the base HA installed and working on the laptop.

Crank up the original version on USB and do a full Backup via HA. Then, move that backup file on to the Laptop Hard disk. You can normally download the file using HA back utility.

Then launch the HA vanilla version on the laptop. i.e the VBox version. Then using the file you copied to the laptop hard drive, restore the backup you made of the USB version back to the HA on the virtual HA running on the Laptop.

Then restart the HA system on the Virtual Box system and it should be where you were on the USB version.

Simple's as a furry friend says. 🤔

On Fri, 2 Dec 2022, 14:27 Thebig24fan, @.***> wrote:

thanks for your swift and great help tried for about 2 weeks and about 12

  • hours to get this to work with no joy untill you found the error that i couldn't find the solution too . all i need now is to get ha onto my laptop hard drive instead of on usb another thing spent hours with no joy even after following lots of how to guides and viedos all get odd issues.

— Reply to this email directly, view it on GitHub https://github.com/StealthChesnut/HA-FoxESS-Modbus/issues/64#issuecomment-1335312555, or unsubscribe https://github.com/notifications/unsubscribe-auth/AG3GF23RSGYVQFNMUMH5ADLWLIBLLANCNFSM6AAAAAASRHCPKM . You are receiving this because you commented.Message ID: @.***>

Thebig24fan commented 2 years ago

Final got it work thanks

From the desk of Nickie

From: tagware @.> Sent: Friday, December 2, 2022 2:56:37 PM To: StealthChesnut/HA-FoxESS-Modbus @.> Cc: Thebig24fan @.>; Author @.> Subject: Re: [StealthChesnut/HA-FoxESS-Modbus] Tried to set this up but keep getting errors (Issue #64)

Is that a request for me to provide links to how to do that?

Basically you run an Virtual environment on the laptop.

https://www.virtualbox.org/

Oracle VBox. You can find YouTube on installing HA on VirtualBox. Then, once you have the base HA installed and working on the laptop.

Crank up the original version on USB and do a full Backup via HA. Then, move that backup file on to the Laptop Hard disk. You can normally download the file using HA back utility.

Then launch the HA vanilla version on the laptop. i.e the VBox version. Then using the file you copied to the laptop hard drive, restore the backup you made of the USB version back to the HA on the virtual HA running on the Laptop.

Then restart the HA system on the Virtual Box system and it should be where you were on the USB version.

Simple's as a furry friend says. 🤔

On Fri, 2 Dec 2022, 14:27 Thebig24fan, @.***> wrote:

thanks for your swift and great help tried for about 2 weeks and about 12

  • hours to get this to work with no joy untill you found the error that i couldn't find the solution too . all i need now is to get ha onto my laptop hard drive instead of on usb another thing spent hours with no joy even after following lots of how to guides and viedos all get odd issues.

— Reply to this email directly, view it on GitHub https://github.com/StealthChesnut/HA-FoxESS-Modbus/issues/64#issuecomment-1335312555, or unsubscribe https://github.com/notifications/unsubscribe-auth/AG3GF23RSGYVQFNMUMH5ADLWLIBLLANCNFSM6AAAAAASRHCPKM . You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FStealthChesnut%2FHA-FoxESS-Modbus%2Fissues%2F64%23issuecomment-1335370219&data=05%7C01%7C%7Ce0c9deb180a942d7ded608dad47569c2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638055897988401058%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=XAI0w%2BmLufxM0ziua4iCl6gyKr6tBvOfzGPFDhKRgAY%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FATWXQTTH75FDC5DDRLWIPF3WLIE2LANCNFSM6AAAAAASRHCPKM&data=05%7C01%7C%7Ce0c9deb180a942d7ded608dad47569c2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638055897988401058%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zWBiAzueyzxQcTyaUzJTa24pfnXy8kSBQoOUPXoVskg%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.***>

Thebig24fan commented 2 years ago

Used virtual box for my first taster of home assistant but had lots of issues with it like the 24 hours sleep bug and alot of issues then tried to get it on hard drive of unused laptop and had lots of inconsistent issues and would crash alot and kept having to keep restore backups etc then was shown how to run from usb worked for last 2 weeks but was getting slower and watched video yesterday and finally got it to install all the way on hard disk and onboard ok after 15-20 hours of hassle , now it finally work as expected with no speed issues or hopefully no stability issues! Got dashboards setup how I want and next job is installing long ethnic cable and set it up properly as it's on an WiFi extender at moment just to test see if fox modbus working ok and at the moment thanks to you and others it working great ! Thanks to the community for all the help ! Next job somebody smart is create a bootable code to install home assistant on formatted hard drive so you don't need to do live Linux step that i had lot of problems with and has anyone automated the switching of the work modes of the fox invter at sun set on to feed in and at sun rise change to self use ? Would be big help if anybody know how ? Thanks

From the desk of Nickie

From: NICKIE Redshaw @.> Sent: Saturday, December 3, 2022 9:38:05 AM To: StealthChesnut/HA-FoxESS-Modbus @.>; StealthChesnut/HA-FoxESS-Modbus @.> Cc: Author @.> Subject: Re: [StealthChesnut/HA-FoxESS-Modbus] Tried to set this up but keep getting errors (Issue #64)

Final got it work thanks

From the desk of Nickie

From: tagware @.> Sent: Friday, December 2, 2022 2:56:37 PM To: StealthChesnut/HA-FoxESS-Modbus @.> Cc: Thebig24fan @.>; Author @.> Subject: Re: [StealthChesnut/HA-FoxESS-Modbus] Tried to set this up but keep getting errors (Issue #64)

Is that a request for me to provide links to how to do that?

Basically you run an Virtual environment on the laptop.

https://www.virtualbox.org/

Oracle VBox. You can find YouTube on installing HA on VirtualBox. Then, once you have the base HA installed and working on the laptop.

Crank up the original version on USB and do a full Backup via HA. Then, move that backup file on to the Laptop Hard disk. You can normally download the file using HA back utility.

Then launch the HA vanilla version on the laptop. i.e the VBox version. Then using the file you copied to the laptop hard drive, restore the backup you made of the USB version back to the HA on the virtual HA running on the Laptop.

Then restart the HA system on the Virtual Box system and it should be where you were on the USB version.

Simple's as a furry friend says. 🤔

On Fri, 2 Dec 2022, 14:27 Thebig24fan, @.***> wrote:

thanks for your swift and great help tried for about 2 weeks and about 12

  • hours to get this to work with no joy untill you found the error that i couldn't find the solution too . all i need now is to get ha onto my laptop hard drive instead of on usb another thing spent hours with no joy even after following lots of how to guides and viedos all get odd issues.

— Reply to this email directly, view it on GitHub https://github.com/StealthChesnut/HA-FoxESS-Modbus/issues/64#issuecomment-1335312555, or unsubscribe https://github.com/notifications/unsubscribe-auth/AG3GF23RSGYVQFNMUMH5ADLWLIBLLANCNFSM6AAAAAASRHCPKM . You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FStealthChesnut%2FHA-FoxESS-Modbus%2Fissues%2F64%23issuecomment-1335370219&data=05%7C01%7C%7Ce0c9deb180a942d7ded608dad47569c2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638055897988401058%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=XAI0w%2BmLufxM0ziua4iCl6gyKr6tBvOfzGPFDhKRgAY%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FATWXQTTH75FDC5DDRLWIPF3WLIE2LANCNFSM6AAAAAASRHCPKM&data=05%7C01%7C%7Ce0c9deb180a942d7ded608dad47569c2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638055897988401058%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zWBiAzueyzxQcTyaUzJTa24pfnXy8kSBQoOUPXoVskg%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.***>

tagware commented 2 years ago

Obviously a cat/rj45 cable is the most stable.

However, if you can't make this work. Then using one of these Power adapters gives both a very near/strong WiFi point or CAT/RJ45 cable connection. This assumes that you have a near power point to the inverter.

Here is one I've used. Not promoting it. Just used it.

Link AV600 Powerline Adapter Wi-Fi Kit, Wi-Fi Booster/Hotspot/ Extender, Wi-Fi Speed up to 300Mbps, 2+1 Ethernet Ports, No Configuration Required, Wi-Fi Auto-Sync, UK Plug (TL-WPA4220 KIT) £33.

On Sat, 3 Dec 2022, 09:54 Thebig24fan, @.***> wrote:

Used virtual box for my first taster of home assistant but had lots of issues with it like the 24 hours sleep bug and alot of issues then tried to get it on hard drive of unused laptop and had lots of inconsistent issues and would crash alot and kept having to keep restore backups etc then was shown how to run from usb worked for last 2 weeks but was getting slower and watched video yesterday and finally got it to install all the way on hard disk and onboard ok after 15-20 hours of hassle , now it finally work as expected with no speed issues or hopefully no stability issues! Got dashboards setup how I want and next job is installing long ethnic cable and set it up properly as it's on an WiFi extender at moment just to test see if fox modbus working ok and at the moment thanks to you and others it working great ! Thanks to the community for all the help ! Next job somebody smart is create a bootable code to install home assistant on formatted hard drive so you don't need to do live Linux step that i had lot of problems with and has anyone automated the switching of the work modes of the fox invter at sun set on to feed in and at sun rise change to self use ? Would be big help if anybody know how ? Thanks

From the desk of Nickie

From: NICKIE Redshaw @.> Sent: Saturday, December 3, 2022 9:38:05 AM To: StealthChesnut/HA-FoxESS-Modbus @.>; StealthChesnut/HA-FoxESS-Modbus @.> Cc: Author @.> Subject: Re: [StealthChesnut/HA-FoxESS-Modbus] Tried to set this up but keep getting errors (Issue #64)

Final got it work thanks

From the desk of Nickie

From: tagware @.> Sent: Friday, December 2, 2022 2:56:37 PM To: StealthChesnut/HA-FoxESS-Modbus @.> Cc: Thebig24fan @.>; Author @.> Subject: Re: [StealthChesnut/HA-FoxESS-Modbus] Tried to set this up but keep getting errors (Issue #64)

Is that a request for me to provide links to how to do that?

Basically you run an Virtual environment on the laptop.

https://www.virtualbox.org/

Oracle VBox. You can find YouTube on installing HA on VirtualBox. Then, once you have the base HA installed and working on the laptop.

Crank up the original version on USB and do a full Backup via HA. Then, move that backup file on to the Laptop Hard disk. You can normally download the file using HA back utility.

Then launch the HA vanilla version on the laptop. i.e the VBox version. Then using the file you copied to the laptop hard drive, restore the backup you made of the USB version back to the HA on the virtual HA running on the Laptop.

Then restart the HA system on the Virtual Box system and it should be where you were on the USB version.

Simple's as a furry friend says. 🤔

On Fri, 2 Dec 2022, 14:27 Thebig24fan, @.***> wrote:

thanks for your swift and great help tried for about 2 weeks and about 12

  • hours to get this to work with no joy untill you found the error that i couldn't find the solution too . all i need now is to get ha onto my laptop hard drive instead of on usb another thing spent hours with no joy even after following lots of how to guides and viedos all get odd issues.

— Reply to this email directly, view it on GitHub < https://github.com/StealthChesnut/HA-FoxESS-Modbus/issues/64#issuecomment-1335312555>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AG3GF23RSGYVQFNMUMH5ADLWLIBLLANCNFSM6AAAAAASRHCPKM>

. You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FStealthChesnut%2FHA-FoxESS-Modbus%2Fissues%2F64%23issuecomment-1335370219&data=05%7C01%7C%7Ce0c9deb180a942d7ded608dad47569c2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638055897988401058%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=XAI0w%2BmLufxM0ziua4iCl6gyKr6tBvOfzGPFDhKRgAY%3D&reserved=0>, or unsubscribe< https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FATWXQTTH75FDC5DDRLWIPF3WLIE2LANCNFSM6AAAAAASRHCPKM&data=05%7C01%7C%7Ce0c9deb180a942d7ded608dad47569c2%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638055897988401058%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zWBiAzueyzxQcTyaUzJTa24pfnXy8kSBQoOUPXoVskg%3D&reserved=0>.

You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/StealthChesnut/HA-FoxESS-Modbus/issues/64#issuecomment-1336125359, or unsubscribe https://github.com/notifications/unsubscribe-auth/AG3GF2466WB624GQ35RCGSLWLMKBNANCNFSM6AAAAAASRHCPKM . You are receiving this because you commented.Message ID: @.***>

tagware commented 2 years ago

Tried setting this up and put ip that’s on inverter but keep’s failing to connect, how do I check its real ip ? I’ve tried connecting laptop to same lan lead and getting 50 meg bb so not as connecting problem even followed the YouTube video done today no luck spent countless hours trying to get this to work please help thanks Error message I get is Logger: pymodbus.client.sync Source: components/modbus/modbus.py:386 First occurred: 19:51:35 (251 occurrences) Last logged: 19:57:59

Connection to (192.168.0.043, 502) failed: timed out Connection to (192.168.0.043, 502) failed: [Errno 113] Host is unreachable

And at startup

Logger: homeassistant.components.integration.sensor Source: components/integration/sensor.py:184 Integration: integration (documentation, issues) First occurred: 19:51:27 (8 occurrences) Last logged: 19:51:27

sensor.load_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_charge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_discharge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.feedin_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.grid_consumption_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>]

Running Home Assistant 2022.11.5 Supervisor 2022.11.2 Operating System 9.3 Frontend 20221108.0 - latest

but had issues been trying since 2022 11 ish tried to restore back to 10.5 but won’t restore properly so can’t go back before 11.2 but even had problems on 10.5 on both modbus and fox cloud hacs add on

For those that make it here. It's because he was using invalid IP address. 192.168.0.048 should be 192.168.0.48 :o)

Thebig24fan commented 2 years ago

Yer tried good quality power line plugs not reliable enough connection for us as not got many sockets about we’re tried them got big Ethernet cable delivered today spent most of the afternoon fitting it and works a treat thanks all just doing tweaks to ha now ie dashboards etc and would love work mode changes in ha so would like to automate then on sun rise sun set and interested what everyone else done with ha and or with fox modbus ? Thanks

Thebig24fan commented 1 year ago

Yer sometimes just a little detail can mess up all your hard work and until you find out what is you may as well be 1000 mile away therefore help from other people makes a great community and really can help people’s experience ! Great help thanks all and I hope I can help others how others have helped me !

From the desk of Nickie

From: tagware @.> Sent: Saturday, December 3, 2022 12:40:37 PM To: StealthChesnut/HA-FoxESS-Modbus @.> Cc: Thebig24fan @.>; Author @.> Subject: Re: [StealthChesnut/HA-FoxESS-Modbus] Tried to set this up but keep getting errors (Issue #64)

Tried setting this up and put ip that’s on inverter but keep’s failing to connect, how do I check its real ip ? I’ve tried connecting laptop to same lan lead and getting 50 meg bb so not as connecting problem even followed the YouTube video done today no luck spent countless hours trying to get this to work please help thanks Error message I get is Logger: pymodbus.client.sync Source: components/modbus/modbus.py:386 First occurred: 19:51:35 (251 occurrences) Last logged: 19:57:59

Connection to (192.168.0.043, 502) failed: timed out Connection to (192.168.0.043, 502) failed: [Errno 113] Host is unreachable

And at startup

Logger: homeassistant.components.integration.sensor Source: components/integration/sensor.py:184 Integration: integration (documentation, issues) First occurred: 19:51:27 (8 occurrences) Last logged: 19:51:27

sensor.load_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_charge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.bat_discharge_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.feedin_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>] sensor.grid_consumption_sum could not restore last state unknown: [<class 'decimal.ConversionSyntax'>]

Running Home Assistant 2022.11.5 Supervisor 2022.11.2 Operating System 9.3 Frontend 20221108.0 - latest

but had issues been trying since 2022 11 ish tried to restore back to 10.5 but won’t restore properly so can’t go back before 11.2 but even had problems on 10.5 on both modbus and fox cloud hacs add on

For those that make it here. It's because he was using invalid IP address. 192.168.0.048 should be 192.168.0.48 :o)

— Reply to this email directly, view it on GitHubhttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FStealthChesnut%2FHA-FoxESS-Modbus%2Fissues%2F64%23issuecomment-1336152697&data=05%7C01%7C%7C34dc901794ee4e4e479208dad52b9502%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638056680399864084%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=FUuyUgfwyh0hJDxQl1Pbgjj6dzGxI08L6ksz%2BPggzS8%3D&reserved=0, or unsubscribehttps://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FATWXQTSH5IIZBLJMTPL3KK3WLM5ULANCNFSM6AAAAAASRHCPKM&data=05%7C01%7C%7C34dc901794ee4e4e479208dad52b9502%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638056680399864084%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=yhi9Uz5aoVLgpL%2FrypvXC8t4gTWLSHi0MKI2d6kT9os%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.***>