gpsd.service failed to start after update.

Stefal / rtkbase

Your own GNSS base station for RTK localization with a Web GUI

GNU Affero General Public License v3.0

467 stars 113 forks source link

gpsd.service failed to start after update. #414

Open Kcoolz opened 2 months ago

Kcoolz commented 2 months ago

################################ STARTING SERVICES ################################ Job for gpsd.service failed because the control process exited with error code. See "systemctl status gpsd.service" and "journalctl -xe" for details.

After updating from 1.5 to 2.6 gpsd will no longer start, started fine before updating. killing the proccesses and removing gpsd.socket and ./install.sh --start-services does not help.

Software/Hardware (please complete the following information):

RTKBase release number 2.6.0
OS: Linux 11 (bullseye) (RPI 4)
SBC RPI 4.
GNSS Device: Ublox F9P RTK
Connection type: USB

Screenshots

thebiggestgit commented 1 month ago

Mine did the same on RPI4.

Stefal commented 1 month ago

I will try to take some time to look at this bug next week

Stefal commented 1 month ago

I can't repro with a Raspberry Pi 3, starting with this image: https://github.com/CentipedeRTK/pi-gen_RTKbase/releases/tag/RTKBaseGNSS-RPi-2.4.1 and updating from 2.4.1 to 2.5 and then to 2.6

I will try with a Raspberry Pi 4 later.

Stefal commented 1 month ago

Test with a Pi 4 and https://github.com/CentipedeRTK/pi-gen_RTKbase/releases/tag/RTKBaseGNSS-RPi-2.4.1 Can't repro

Test with a Pi 4 and https://github.com/CentipedeRTK/pi-gen_RTKbase/releases/tag/RTKBase-GNSS-RPi-2.5.0 Can't repro but found another bug: #418

Kcoolz commented 2 weeks ago

I tried again with that image, on a pi4 and 5. Didnt work. Tried again with a new image and same thing. Still getting the GPSD error, i also tried a different GPS unit.