search

SteffeyDev / atemOSC

Control ATEM video switchers over the network with OSC messages
http://www.atemosc.com
202 stars 32 forks source link

With 2.54 Version: Or ATEM Software Control or AtemOsc Working #140

Closed dadomultimedia closed 3 years ago

dadomultimedia commented 4 years ago

I´m using 2.54 version because 3.0 and 2.57 are crashing on Mojave. I found this: If I turn on AtemOSC first, the ATEM Software Control is not detecting the Atem MINI. If I turn on ATEM Software Control First, the AtemOSC is not detecting either the Atem MINI.

I tried to set the IP Address in different ways:

Still trying to find a solution. Any help I will appreciate. Thank you in advance. David.

SteffeyDev commented 4 years ago

Have you tried 3.0.1?

dadomultimedia commented 4 years ago

Hi Daniel, First of all, thank you a lot for your fast response. I truly cherish it.

Actually, After that I sent you the message, I downloaded 3.0.1, and the same, in this case, if I try to turn on the AtemOSC, without the ATEM Software Control, just get crash. I turn on first the ATEM Software Control and simply the AtemOSC, does not detect the device. Right now, I was testing the 2.2 version. Just in case, but the same, like 2.54, detects the device but without the ATEM Software Control. I could send you a couple of screenshots. or video shot if you like.

Greetings and Blessings. David

De: Peter Steffey notifications@github.com Enviado: martes, 25 de febrero de 2020 05:29 a. m. Para: danielbuechele/atemOSC atemOSC@noreply.github.com CC: dadomultimedia dadoproduccion@hotmail.com; Author author@noreply.github.com Asunto: Re: [danielbuechele/atemOSC] With 2.54 Version: Or ATEM Software Control or AtemOsc Working (#140)

Have you tried 3.0.1?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/danielbuechele/atemOSC/issues/140?email_source=notifications&email_token=AETHOYKDBURB4QJOHZT5TWTRESUDNA5CNFSM4K2ZDRA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEM2TWEA#issuecomment-590691088, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AETHOYNUAYZSXF5VMMD2U7DRESUDNANCNFSM4K2ZDRAQ.

dadomultimedia commented 4 years ago

Sorry, SteffeyDev. These are the 2 screen-captures.

ATEM Software Working But not AtemOSC AtemOSC Working but not ATEM Software Control

dadomultimedia commented 4 years ago

By the way, these screens were made with 3.0.1 version

SteffeyDev commented 4 years ago

@dadomultimedia Can you try 3.0.5? I think I fixed most of the crashes

dadomultimedia commented 4 years ago

Oh great! I will, thank you! I will keep you informed. Greetings!

alex519pgox commented 4 years ago

Hi! im on the 3.1.6, and i got exactly the same issue. im running in mojave, the atem software control is on 8.2.3 and im using an atem mini. the atem and the mac are connected to a switch that is connected to a router. most of the time is my mistake on some bad connection or setting, there is some process i should check out?

cheers! Alex

alex519pgox commented 4 years ago

Hi!

im sorry, i didn't change the settings or anything doing the same today and both programs works at the same time without problems.

sorry for the inconvenience.

SteffeyDev commented 3 years ago

Now that version 4 is out, I'm closing this. Open a new issue if problems persist.