search

SteffeyDev / atemOSC

Control ATEM video switchers over the network with OSC messages
http://www.atemosc.com
202 stars 32 forks source link

Record (and stop recording) on ATEM Mini Pro #158

Closed 2xbass closed 3 years ago

2xbass commented 4 years ago

It would be really great if we could get the ability to start and stop recording on the ATEM Mini Pro. We have the ability to record through the Hyperdeck but the Mini Pro has the ability to record to a disk (and in fact even a bank of disks) through its USB-C port. I’ve only ever tried with one disk but the announcement video for the Mini Pro showed that it’s possible to choose from different disks and record to different ones.

SteffeyDev commented 4 years ago

Can you make a Macro that starts and stops recording? If you can make a macro, you can use atemOSC to trigger that macro.

mkcologne commented 4 years ago

Unfortunately the Mini Pro can't do Macros.

SteffeyDev commented 4 years ago

It can do macros, you just have to set them up using the ATEM software on a nearby Mac or Windows PC. Once the macro is set up, you can use atemOSC to trigger it without having the software open or even the external PC powered on.

SteffeyDev commented 4 years ago

I’ll mark this as a feature request, just want to make sure you don’t get held up waiting for us :)

mkcologne commented 4 years ago

Thanks. I usually work an big Mixers (GrassValley, Belden, Sony ...) and so I've tried a komplex one. So only Simple stuff seem possible, or is there a way to set a pause, or run a macro inside an macro to combine them? Cheers - M.

SteffeyDev commented 4 years ago

I’m not familiar with the capabilities of your switcher or creating macros in general, but were you able to make a macro to start/stop the recording?

mkcologne commented 4 years ago

For my questions this ist the wrong Thread. Thanks for ur help. Will continue @blackmagic. Cheers - M.

SteffeyDev commented 4 years ago

Ah I didn’t look and assumed you were the OP. My mistake

mkcologne commented 4 years ago

So I found out: the Macros are inside the Project_XML and there you can do much more than you can record. E.g.: A pause can inserted with a simple line:

So its easy to record simple Start/Stop Macros, or add it in the XML with:

2xbass commented 4 years ago

I was able to create a macro to do this so I'm good now.

cayblood commented 3 years ago

Does anyone know if it's possible to pause recording on an ATEM Mini Pro ISO? This is a really handy feature when recording computer demos and you don't want to have to cut sections in post-production.

pixelwiz commented 1 year ago

Does anyone know if it's possible to pause recording on an ATEM Mini Pro ISO? This is a really handy feature when recording computer demos and you don't want to have to cut sections in post-production.

I'd really like to see a Pause Recording option too