Closed astronomer999 closed 1 year ago
Thanks for adding your first issue to Stellarium. If you have questions, please do not hesitate to contact us.
Post a screenshot please.
Do you run any screen scaling?
No--screen run at resolution of monitor.
On Thu, Nov 10, 2022 at 7:12 AM Georg Zotti @.***> wrote:
Do you run any screen scaling?
— Reply to this email directly, view it on GitHub https://github.com/Stellarium/stellarium/issues/2837#issuecomment-1310192615, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4DJYK4XLH6KVZVNY6CMN2TWHTRBHANCNFSM6AAAAAAR4A6SBA . You are receiving this because you authored the thread.Message ID: @.***>
-- Thomas B. Fowler President, Xavier Zubiri Foundation of North America 1571 44th Street, NW Washington, DC 20007 (202) 316-6757 FAX 202 337-4835 www.zubiri.org
Tried on different monitor, no change. Screenshot attached.
Could you please check qt5-based package?
Thanks--what is the qt5-based package? I just downloaded Stellarium 1.1 yesterday, so I assume that I have the latest version.
On Thu, Nov 10, 2022 at 12:26 PM Alexander V. Wolf @.***> wrote:
Could you please check qt5-based package?
— Reply to this email directly, view it on GitHub https://github.com/Stellarium/stellarium/issues/2837#issuecomment-1310638783, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4DJYK477LZPBWCGQDQ2HQLWHUV43ANCNFSM6AAAAAAR4A6SBA . You are receiving this because you authored the thread.Message ID: @.***>
-- Thomas B. Fowler President, Xavier Zubiri Foundation of North America 1571 44th Street, NW Washington, DC 20007 (202) 316-6757 FAX 202 337-4835 www.zubiri.org
what is the qt5-based package?
The stellarium-1.1.1-qt5-win64.exe file from the Releases page.
There are two problems aside from the lack of arrow buttons here:
QPixmap::scaled: Pixmap is a null pixmap
messages in the logStellarium.exe
to some compatibility mode. Apparently, here Qt doesn't have a chance to use its ability for scaling, and Windows does it on its own.No--screen run at resolution of monitor.
This doesn't preclude scaling being in use. You may have anything other than 100% in the Display settings, as described here.
https://github.com/Stellarium/stellarium/releases contains packages with qt5 and qt6 in the file name. I doubt this should be a problem with your 2060 card, though. I see many issues in your logfile. Do other buttons (left and bottom button bars) show correctly?
Thanks for your research and comment. As far as I can tell, the left and bottom buttons work correctly. Is it necessary to modify the oculars file for the 1.1 version of Stellarium? The last version I was using before installing this version was 0.20, as I recall.
On Thu, Nov 10, 2022 at 2:45 PM Georg Zotti @.***> wrote:
https://github.com/Stellarium/stellarium/releases contains packages with qt5 and qt6 in the file name. I doubt this should be a problem with your 2060 card, though. I see many issues in your logfile. Do other buttons (left and bottom button bars) show correctly?
— Reply to this email directly, view it on GitHub https://github.com/Stellarium/stellarium/issues/2837#issuecomment-1310813767, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4DJYK53GJE4C46LSOVR5ODWHVGEFANCNFSM6AAAAAAR4A6SBA . You are receiving this because you authored the thread.Message ID: @.***>
-- Thomas B. Fowler President, Xavier Zubiri Foundation of North America 1571 44th Street, NW Washington, DC 20007 (202) 316-6757 FAX 202 337-4835 www.zubiri.org
Thanks! I tried changing the scale to 100% from 150%, but that had no effect on the problem. I also tried running Stellarium on my other monitor (I have two monitors connected to my computer), but the problem was the same on that monitor as well.
On Thu, Nov 10, 2022 at 2:31 PM Ruslan Kabatsayev @.***> wrote:
There are two problems aside from the lack of arrow buttons here:
- Lots of QPixmap::scaled: Pixmap is a null pixmap messages in the log
- The screenshot having unnaturally blurred but aliased text, which would be the case if scaling settings were overridden in the shortcut settings for Stellarium.exe to some compatibility mode. Apparently, here Qt doesn't have a chance to use its ability for scaling, and Windows does it on its own.
No--screen run at resolution of monitor.
This doesn't preclude scaling being in use. You may have anything other than 100% in the Display settings, as described here https://www.eizoglobal.com/support/compatibility/dpi_scaling_settings_windows/ .
— Reply to this email directly, view it on GitHub https://github.com/Stellarium/stellarium/issues/2837#issuecomment-1310798202, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4DJYK5LFWVQKXUMSZLRAB3WHVEQ5ANCNFSM6AAAAAAR4A6SBA . You are receiving this because you authored the thread.Message ID: @.***>
-- Thomas B. Fowler President, Xavier Zubiri Foundation of North America 1571 44th Street, NW Washington, DC 20007 (202) 316-6757 FAX 202 337-4835 www.zubiri.org
Is it necessary to modify the oculars file for the 1.1 version of Stellarium? The last version I was using before installing this version was 0.20, as I recall.
No, the format did not change. This is just something about GUI buttons and -- I still think -- some aspect of screen scaling. But @10110111 knows better about this now.
What is the value of arrow_scale
setting in ocular.ini
config file?
It is 0 (zero).
On Thu, Nov 10, 2022 at 4:59 PM Ruslan Kabatsayev @.***> wrote:
What is the value of arrow_scale setting in ocular.ini config file?
— Reply to this email directly, view it on GitHub https://github.com/Stellarium/stellarium/issues/2837#issuecomment-1310958720, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4DJYK2SQJ5MIPZGPMCEINDWHVV3DANCNFSM6AAAAAAR4A6SBA . You are receiving this because you authored the thread.Message ID: @.***>
-- Thomas B. Fowler President, Xavier Zubiri Foundation of North America 1571 44th Street, NW Washington, DC 20007 (202) 316-6757 FAX 202 337-4835 www.zubiri.org
I also tried the other commands to switch oculars: CTRL + ] and CTRL + [ These don't work either.
On Thu, Nov 10, 2022 at 4:59 PM Ruslan Kabatsayev @.***> wrote:
What is the value of arrow_scale setting in ocular.ini config file?
— Reply to this email directly, view it on GitHub https://github.com/Stellarium/stellarium/issues/2837#issuecomment-1310958720, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4DJYK2SQJ5MIPZGPMCEINDWHVV3DANCNFSM6AAAAAAR4A6SBA . You are receiving this because you authored the thread.Message ID: @.***>
-- Thomas B. Fowler President, Xavier Zubiri Foundation of North America 1571 44th Street, NW Washington, DC 20007 (202) 316-6757 FAX 202 337-4835 www.zubiri.org
It is 0 (zero).
This is the problem then. Set it to the default 150, and the buttons should reappear.
Thanks Ruslan--that fixed it!
On Thu, Nov 10, 2022 at 5:37 PM Ruslan Kabatsayev @.***> wrote:
It is 0 (zero).
This is the problem then. Set it to the default 150, and the buttons should reappear.
— Reply to this email directly, view it on GitHub https://github.com/Stellarium/stellarium/issues/2837#issuecomment-1310990011, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4DJYK7P44VSCIDJQPXOJPDWHV2L5ANCNFSM6AAAAAAR4A6SBA . You are receiving this because you authored the thread.Message ID: @.***>
-- Thomas B. Fowler President, Xavier Zubiri Foundation of North America 1571 44th Street, NW Washington, DC 20007 (202) 316-6757 FAX 202 337-4835 www.zubiri.org
This same thing is happening to me now and I can't even find an ocular.ini file or any .ini file that contains arrow_scale.
Update: I found ocular.ini under AppData and it is indeed set to 100. This is on latest 23.2 qt6 on windows 11.
Update: Changing the value to something like 110 -- then set it back if desired -- made the buttons appear again.
Expected Behaviour: in oculars box on screen in upper right corner, used to be able to change any ocular with arrows to right or left of ocular, e.g., ocular, telescope, lens, etc.
Actual Behaviour: Can't change any ocular in the box. No arrows to right or left.
Describe or maybe attach a screenshot?
Steps to reproduce: Load program, click on object, click on ocular view button or sensor button. Try to change.
System
Logfile:
If possible, attach the logfile
log.txt
from your user data directory. Look into the Guide for its location.log.txt