search

StephanJoubert / home_assistant_solarman

Home Assistant component for Solarman collectors used with a variety of inverters.
Apache License 2.0
560 stars 199 forks source link

Connection problem 1PH HYD6000 ZSS HP inverter #160

Open Simonik71 opened 1 year ago

Simonik71 commented 1 year ago

Hi all I have an inverter 1PH HYD6000 ZSS HP with S/N starting with: 239xxxx. The script doesn't work, i get: "Solarman status_connection" -> "disconnected". Could you plese send me any suggestion ? Regards

MartinMcFlyITA commented 1 year ago

I have a zucchetti ZCS HYD6000 ZSS HP inverter to export the data use a solarman datalogger with serial number 270XXXXXXX and with firmware version LSW3_15_270A_1.53 on HA I see 77 entities, but all without data and it is not connected.

How can I do to obtain data from my solarman datalogger to my HA installation?

kind regards

socapex commented 1 year ago

Hi, have the same ZCS HYD6000 ZSS and same datalogger with serial number 270XXXXXXX and firmware version LSW3_15_270A_1.53 on HA I see 77 entities, but all without data and it is not connected. Inside the status_connection sensor every time that restart HA i see the connection only for 30 secs, but not value for other sensors. Thanks in advance

paobrunelli commented 1 year ago

Hi, same problem with inverter zucchetti ZCS HYD5000 HP. In the log file I could understand problems in the parameters due to a possibly different definitioin file, but it seems that the problem is even on connection.

having enabled debug log registration, I find this error:

Traceback (most recent call last): File "/config/custom_components/solarman/init.py", line 35, in update_listener hass.data[DOMAIN][entry.entry_id].config(entry) KeyError: 'solarman' 2023-01-01 22:06:24.506 ERROR (MainThread) [homeassistant.components.hassio.handler] Client error on /homeassistant/restart request Server disconnected

thank you in advanc for any help!

Oiligriv commented 1 year ago

Hello I also own a ZCS Inverter, my model is ZCS HYD6000 HP. I think the HP series stands out from the current homeassistant yaml setup. Another note, if I connect to the wifi dongle web page I don't see the inverter information, I don't know if it will help.

We hope that it will be possible to integrate our ZCS HP sooner rather than later.

thanks again for what you do

paobrunelli commented 1 year ago

In the while I have posted a request to ZCS support, asking for info required to setup the integration with the HP serie inverter. Let's see...

Simonik71 commented 1 year ago

In the while I have posted a request to ZCS support, asking for info required to setup the integration with the HP serie inverter. Let's see...

Could you please share the request, so we can do the same (as pushing...) Regards

TommasoPino commented 1 year ago

In the meanwhile, I tried to get a registry map for the 1PH HYD6000 ZSS HP inverter. The attached CSV file is the function code 03 registries map, with the address, the value, and the hex value. I do not know how to use it to create a YAML configuration file. Is there anyone that could help with it? registriesMap.csv

paobrunelli commented 1 year ago

these are the email exchanged with ZCS Support, after they sent me credentials to access their server

Nessuna prospettiva per una più alta frequenza di aggiornamento dei dati sul server? …se ci fossero problemi di consistenza su un dataset esteso (ipotizzo…) è possibile individuare un sottoinsieme di dati validi “istantaneamente”, associati ad un timestamp? Grazie ancora Paolo brunelli

TommasoPino commented 1 year ago

The NDA is a problem to allow everyone to solve this issue ... thanks to share the information between you and ZCS

Oiligriv commented 1 year ago

Ciao @paobrunelli Avevo trovato qualcosa online su modbus, ma è complicato da costruire e configurare. Speriamo che qualcuno riesca a trovare una soluzione sul yaml di configurazione. Rimango deluso da ZCS che non sia strutturata per lo sviluppo di un portale con dati in tempo reale.

Virgilio

TommasoPino commented 1 year ago

@Oiligriv esistiamo noi apposta 👍 (We exist to do that) Cerchiamo di rimanere sull'inglese per consentire a tutti di contitribuire (let's keep English in order to allow everyone to contribute)

@paobrunelli please let us know if there is something that could be useful

paobrunelli commented 1 year ago

i can't imagine any real technical reason for zcs not providing real time data out from their sever, nor supporting any real time interface toward the inverter. Such interfaces would be the basis for any serious energy management solution.

TommasoPino commented 1 year ago

I am completely on you side. I also totally do not understand why a simple API has not been hosted on the usb Stick attached to the inverter. At this time, it is the extremely simple to implement and useful to use for the IoT world. Bah

If it is possible for you, could you share the information privately? Could help me to complete the reverse engineering ;)

Thanks

Il giorno gio 5 gen 2023 alle 21:12 paobrunelli @.***> ha scritto:

i can't imagine any real technical reason for zcs not providing real time data out from their sever, nor supporting any real time interface toward the inverter. Such interfaces would be the basis for any serious energy management solution.

— Reply to this email directly, view it on GitHub https://github.com/StephanJoubert/home_assistant_solarman/issues/160#issuecomment-1372684323, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFMXQOACKWIH5GHK5ZM4UXLWQ4TKDANCNFSM6AAAAAATM77UGA . You are receiving this because you are subscribed to this thread.Message ID: @.*** com>

fulippo commented 1 year ago

Hi all, I've been able to integrate the inverter into HA using the latest version of the Solarman extension. You need to re-download the extension using the latest version available. You need to enable "beta versions" and then select "main". It worked for me. Hope this helps

TommasoPino commented 1 year ago

Which configuration file have you used?

Il giorno ven 6 gen 2023 alle 17:23 Filippo Pisano @.***> ha scritto:

Hi all, I've been able to integrate the inverter into HA using the latest version of the Solarman extension. You need to re-download the extension using the latest version available. You need to enable "beta versions" and then select "main". It worked for me. Hope this helps

— Reply to this email directly, view it on GitHub https://github.com/StephanJoubert/home_assistant_solarman/issues/160#issuecomment-1373861944, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFMXQOE2NRUV562QDAAS3M3WRBBJNANCNFSM6AAAAAATM77UGA . You are receiving this because you are subscribed to this thread.Message ID: @.*** com>

fulippo commented 1 year ago

Which configuration file have you used?

sofar_hyd3k-6k.yaml

Simonik71 commented 1 year ago

Unfortunately, doesn't work for me. Are you already connected to the grid to sell power ?

paobrunelli commented 1 year ago

it does not work form me neither! but with a small step ahead: now the integration sheos in HA the same files the are in github, previously I was missing somee inverter confiuration

TommasoPino commented 1 year ago

Hi all, I've been able to integrate the inverter into HA using the latest version of the Solarman extension. You need to re-download the extension using the latest version available. You need to enable "beta versions" and then select "main". It worked for me. Hope this helps

Are you sure to have the HYD 6000-ZSS HP and not the HYD 6000-ZSS?

By the way, it does not work for me also. The problem is that the entities are at different registry addresses

MartinMcFlyITA commented 1 year ago

using "main" branch (inverter zucchetti ZCS HYD6000 ZSS HP and datalogger serial 270XXXXXXX )

I see 2023-01-07 22:07:13.349 ERROR (MainThread) [homeassistant.config_entries] Error unloading entry 192.168.88.11 for solarman Traceback (most recent call last): File "/usr/src/homeassistant/homeassistant/config_entries.py", line 533, in async_unload result = await component.async_unload_entry(hass, self) File "/config/custom_components/solarman/init.py", line 28, in async_unload_entry hass.data[DOMAIN].pop(entry.entry_id) KeyError: 'solarman'

sofar_hyd3k-6k.yaml setting loaded

M

TommasoPino commented 1 year ago

I have tested it with sofar_g3hyd.yaml and it perfectly works ❤️

paobrunelli commented 1 year ago

Yes for me as well! Sofar_g3hyd works perfectly with zcs PH HYD5000HP. now I have 60+ measures available, but for some of them it's difficult (for me) to understand what do they mean. Does any one have documentation on zcs inverter measures? Thanks a lot for any help

TommasoPino commented 1 year ago

Hi paobrunelli, which value do you not understand?

Il giorno lun 16 gen 2023 alle 21:48 paobrunelli @.***> ha scritto:

Yes for me as well! Sofar_g3hyd works perfectly with zcs PH HYD5000HP. now I have 60+ measures available, but for some of them it's difficult (for me) to understand what do they mean. Does any one have documentation on zcs inverter measures? Thanks a lot for any help

— Reply to this email directly, view it on GitHub https://github.com/StephanJoubert/home_assistant_solarman/issues/160#issuecomment-1384535739, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFMXQODFBRDUJZLT4DXVVQTWSWXYHANCNFSM6AAAAAATM77UGA . You are receiving this because you are subscribed to this thread.Message ID: @.*** com>

socapex commented 1 year ago

Hi All ! sofar_g3hyd.yaml work great, just rename the only fase in use and comment the other two fases. in the future and with a bit of time will compare the sofar_g3hyd.yaml and sofar_hyd3k-6k.yaml and relative registers to try to find some missing value., 77 instead of 61. Many Thanks to All

paobrunelli commented 1 year ago

hi Tommaso thank you for your help! I don't understand why I have three times actve power output, current output, voltage phase and current PCC, once ..._S, the _T and _R

thank you again

paolo

Il 16/01/2023 23:00 Tommaso @.***> ha scritto:

Hi paobrunelli, which value do you not understand?

Il giorno lun 16 gen 2023 alle 21:48 paobrunelli @.***> ha scritto:

Yes for me as well! Sofar_g3hyd works perfectly with zcs PH HYD5000HP. now I have 60+ measures available, but for some of them it's difficult (for me) to understand what do they mean. Does any one have documentation on zcs inverter measures? Thanks a lot for any help

— Reply to this email directly, view it on GitHub https://github.com/StephanJoubert/home_assistant_solarman/issues/160#issuecomment-1384535739, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFMXQODFBRDUJZLT4DXVVQTWSWXYHANCNFSM6AAAAAATM77UGA . You are receiving this because you are subscribed to this thread.Message ID: @.*** com>

— Reply to this email directly, view it on GitHub https://github.com/StephanJoubert/home_assistant_solarman/issues/160#issuecomment-1384607791, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOZT65PPCDELFA6UGBOK4BTWSXAHTANCNFSM6AAAAAATM77UGA. You are receiving this because you were mentioned. https://github.com/notifications/beacon/AOZT65MQVH2JKOV5DQVSHIDWSXAHTA5CNFSM6AAAAAATM77UGCWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSSQ5YC6.gifMessage ID: @.***>

socapex commented 1 year ago

@paobrunelli, Ciao Paolo, because the file is write for the 3 phase inverter, R.S.T, in mono phase you have only one, the R, so in HA entity menu you can delete or disable the ones you don't need.

MartinMcFlyITA commented 1 year ago

using 1.4.2 and sofar_g3hyd.yaml template works like a charm! (ZCS HYD6000 ZSS HP inverter datalogger with serial number 270XXXXXXX and with firmware version LSW3_15_270A_1.53

Repo95 commented 1 year ago

Some of the values are updating, but for others, like daily battery charge and daily battery charge, the the value is not updating. Do you have any idea why this happen? I have ZCS HYD6000 ZSS HP, and logger: 270xxxxxxx LSW3_15_270A_1.53

kavejo commented 1 year ago

I do have the same problem here.

My Inverter is an AZZURRO 3PH HYD6000 ZSS and I have tried to set that up with the sofar_hyd3k-6k-es.yaml configuration file. I have a Connext linked to the inverter, but given there was no integration in Home Assistant available, I also purchased a Wi-Fi USB stick with firmware LSW3_15_270A_1.53.

If I use the SolarMan Smart app I can see the data (from the logger) - very much in line with what I can see via the AzzurroSystem app (from Connext), however I don't seem to be able to get any data in Home Assistant via this integration.

In the log I can see the following warning:

Logger: custom_components.solarman.solarman
Source: custom_components/solarman/solarman.py:173
Integration: Solarman (documentation, issues)
First occurred: 15:23:29 (10 occurrences)
Last logged: 15:36:20

Querying registers [512 - 597] failed, aborting.

I can also see the following error:

Logger: homeassistant.config_entries
Source: custom_components/solarman/__init__.py:28
Integration: Solarman (documentation, issues)
First occurred: 15:30:52 (1 occurrences)
Last logged: 15:30:52

Error unloading entry 10.3.0.1 for solarman
Traceback (most recent call last):
  File "/usr/src/homeassistant/homeassistant/config_entries.py", line 533, in async_unload
    result = await component.async_unload_entry(hass, self)
  File "/config/custom_components/solarman/__init__.py", line 28, in async_unload_entry
    hass.data[DOMAIN].pop(entry.entry_id)
KeyError: 'solarman'

Would anybody be able to help me resolving this issue?

Thanks!

TommasoPino commented 1 year ago

I think you have to use Sofar_g3hyd.yaml file for that. It works like a sharm for the 1PH but it has the registry for other two phases

Let us know

Il giorno lun 27 feb 2023 alle 15:46 Tommaso Toniolo < @.***> ha scritto:

I do have the same problem here.

My Inverter is an AZZURRO 3PH HYD6000 ZSS and I have tried to set that up with the sofar_hyd3k-6k-es.yaml configuration file. I have a Connext linked to the inverter, but given there was no integration in Home Assistant available, I also purchased a Wi-Fi USB stick with firmware LSW3_15_270A_1.53.

If I use the SolarMan Smart app I can see the data (from the logger) - very much in line with what I can see via the AzzurroSystem app (from Connext), however I don't seem to be able to get any data in Home Assistant via this integration.

In the log I can see the following warning:

Logger: custom_components.solarman.solarman Source: custom_components/solarman/solarman.py:173 Integration: Solarman (documentation, issues) First occurred: 15:23:29 (10 occurrences) Last logged: 15:36:20

Querying registers [512 - 597] failed, aborting.

I can also see the following error:

Logger: homeassistant.config_entries Source: custom_components/solarman/init.py:28 Integration: Solarman (documentation, issues) First occurred: 15:30:52 (1 occurrences) Last logged: 15:30:52

Error unloading entry 10.3.0.1 for solarman Traceback (most recent call last): File "/usr/src/homeassistant/homeassistant/config_entries.py", line 533, in async_unload result = await component.async_unload_entry(hass, self) File "/config/custom_components/solarman/init.py", line 28, in async_unload_entry hass.data[DOMAIN].pop(entry.entry_id) KeyError: 'solarman'

Would anybody be able to help me resolving this issue?

Thanks!

— Reply to this email directly, view it on GitHub https://github.com/StephanJoubert/home_assistant_solarman/issues/160#issuecomment-1446462165, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFMXQOHS52OJUST7D3XBZI3WZS447ANCNFSM6AAAAAATM77UGA . You are receiving this because you are subscribed to this thread.Message ID: @.*** com>

kavejo commented 1 year ago

Thank you @TommasoPino. Let me give it a try and report back, however that would be strange.

If I look at the readme.md on https://github.com/StephanJoubert/home_assistant_solarman I can see the following: image

Mine is exactly a HYD6000 ZSS, so according to the documentation I would be using the correct file already. Also, if I search an image of the inverter for the file you are suggesting (Sofar KTLX-G3), that looks very different form mine.

kavejo commented 1 year ago

@TommasoPino - sadly changing the configuration has not resolved the problem.

I have reached out to ZCS support and they said that unfortunately modern inverters do not allow data to be queried locally, which is strange as I can read on the Home Assistant forum that other users with the same antenna are getting the data just fine.

TommasoPino commented 1 year ago

Do not listen the ZCS support… they are extremely capable of passing sheet from sofar to us… i would like to see a photovoltaic part without querying data locally… bah

After that in the afternoon I will post here a python script that I used to map the registry directly. Maybe it could help you debugging and solve this situation.

Il giorno lun 27 feb 2023 alle 16:10 Tommaso Toniolo < @.***> ha scritto:

@TommasoPino https://github.com/TommasoPino - sadly changing the configuration has not resolved the problem.

I have reached out to ZCS support and they said that unfortunately modern inverters do not allow data to be queried locally, which is strange as I can read on the Home Assistant forum that other users with the same antenna are getting the data just fine.

— Reply to this email directly, view it on GitHub https://github.com/StephanJoubert/home_assistant_solarman/issues/160#issuecomment-1446505159, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFMXQODG4VUV33LEGHGUSYTWZS7VJANCNFSM6AAAAAATM77UGA . You are receiving this because you were mentioned.Message ID: @.***>

kavejo commented 1 year ago

When I chased them up, they said that they only support querying the data directly via ModBus RTU / RS485. They shared these protocol specifications, not sure if they could be useful to query data from inverters like mine.

ModBus-RTU Communication Protocol 3PH Hybrid and Inverter.pdf

kavejo commented 1 year ago

Just one last update from my side.

I have been looking at the registries on the file linked above, and I have grabbed the address of few, for example Power_PV1 which is at 0x0586. Checking on the Inverter definitions I have seen that sofar_g3hyd.yaml was matching the register and its definition. I have then checked few and when I saw a handful were matching, then I attempted the configuration with this definition file.

I have to say that worked like a charm, and that I get 66 entities, as shown below.

image

I guess this solved my issue. Therefore, thank you @TommasoPino as your suggestion to try another model led me on the direction of checking protocl specs and yaml files to identify the one I had to use.

It'd be interesting to see if it all the registers on the specs file are brought into the add-on, but I guess that is something for a later stage.

Peyoz commented 1 year ago

these are the email exchanged with ZCS Support, after they sent me credentials to access their server

* my mail:
  Buon giorno e buon anno.
  Grazie per la disponibilità.
  Il mio obiettivo è quello di integrare i dati estratti dall’inverter in scenari/automazioni Home Assistant per la gestione ottimale dei carichi in funzione dello stato dell’impianto PV. A questo scopo il considerevole ritardo con cui i dati sono resi 

* final ZCS answer:
  Buonasera,
  purtroppo non siamo strutturati per fornire servizi così specifici.
  Le allego l'NDA concordato.

@paobrunelli Did you get any answer from ZCS? the update provided by @kavejo is great, but I'm really interested in double checking on the specific modbus definition for the hyd-3k-6k-ep line of inverters.. (zcs zss-hp) ? Battery registers are a little different on this older line of inverters.

TommasoPino commented 1 year ago

Hello everyone, after a few night of searching I found an excel with the entire map of registers wtith: -meaing -R or RW permission

After other nights crashing my head I am now able not only to read the telemetry but also to change the inverter status (for example changing the mode from automatic mode to charging mode) I use this option with a select button in the HA UI and a modification in inverter configuration file. Obviously i had changed the integration too. I will try the following weekend to fork this repository in order to prepare a pull request to add this capability. I think this will be element necessary to fully integrate the inverter into home assistant automations.

I use it to charge the battery during the night if the following day has a very bad production prediction.

Stay tuned

Il giorno mer 8 mar 2023 alle 23:52 Alessandro Peyrachia < @.***> ha scritto:

these are the email exchanged with ZCS Support, after they sent me credentials to access their server

  • my mail: Buon giorno e buon anno. Grazie per la disponibilità. Il mio obiettivo è quello di integrare i dati estratti dall’inverter in scenari/automazioni Home Assistant per la gestione ottimale dei carichi in funzione dello stato dell’impianto PV. A questo scopo il considerevole ritardo con cui i dati sono resi

  • final ZCS answer: Buonasera, purtroppo non siamo strutturati per fornire servizi così specifici. Le allego l'NDA concordato.

@paobrunelli https://github.com/paobrunelli Did you get any answer from ZCS? the update provided by @kavejo https://github.com/kavejo is great, but I'm really interested in double checking on the specific modbus definition for the hyd-3k-6k-ep line of inverters.. (zcs zss-hp) ?

— Reply to this email directly, view it on GitHub https://github.com/StephanJoubert/home_assistant_solarman/issues/160#issuecomment-1460997073, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFMXQOE7KL6YQBXXOXW6CNTW3EETNANCNFSM6AAAAAATM77UGA . You are receiving this because you were mentioned.Message ID: @.***>

Pigi-102 commented 1 year ago

Hello, just joined the discussion as I have just started my Azzurro (1PH HYD 6000 ZSS HP ) with wifi sernum 239XXXXXXX. I can confirm that if I use sofar_hyd3k-6k-es.yaml I get 77 entities, but never get connected with the same errors mentioned from other collegues. If instead I use sofar_g3hyd.yaml I get a good connection and 180 entites.Quite a bunch of this are unavailable but other are available and with values, not sure if good or bad but at least values. Strange thing I cannot see the 2nd battery ( says unknown for all values ), but this could also be a problem in installation ( not done by me ). Battery 1 temperature jumps from 2,279 °C, which looks quite high to me, and 0° Battery 1 voltage jump from 50ish and 227ish that seems strange too.

Ambient temperature too is strange saying 43° but inverter and battery are in a box without warming so these days could be around 15, no more than this.

Other stuff I see are all the vaules ending in "T" "R" and "S" are unknown or 0, but the "Total"s are fine.

Voltage_Phase_R is fine.

kavejo commented 1 year ago

@Pigi-102, for your inverter I’d say you shall use “sofar_hyd3k-6k-es.yaml”.

I wouldn’t say that having more values is necessarily any better, especially if these were mostly unknown. To me that just sound like you’re using a wrong definition file.

Regarding the values ending by R, S, and T, these are the names of the phases and values should be postulated for 3-phase inverters; for single-phase it makes sense that only phase R has values.

I’d say, if you think that the inverter 1PH HYD 6000 ZSS HP shall report more attributes, it might be a matter to request the register definition to Zucchetti and the port those in the sofar_hyd3k-6k-es.yaml file. I believe @TommasoPino was already looking into this.

Sadly I don’t have the details for single-phase inverters as mine is 3-phase, however if someone shares the ModBus specs for your inverter model I’d happily contribute by enhancing the existing definition.

Pigi-102 commented 1 year ago

@kavejo No way the "sofar_hyd3k-6k-es.yaml" works in any way. It expose these 77 entities but it remains disconnected and unkown.

TommasoPino commented 1 year ago

Hi Pigi-102, the configuration sofar_hyd3k-6k-es.yaml exposes the 77 entities because the configuration defines them. The entities remain disconnected end unknown because the register addresses defined in the configuration file are not correct for your inverter.

The sofar_g3hyd.yaml is the configuration for a 3 Phase inverter (R, T, S are the name of each phase) but it is also valid for the 1 Phase inverter. The reason behind that is due to programming efficiency. There is no reason to write twice the firmware code for the same controller computer installed for both inverter families. Indeed, the registers for the first phase are the same for both inverters.

I have no time at this moment to work on it and clean the sofar_g3hyd.yaml from the unnecessary entities creating a sofar_g1hyd.yaml configuration. But I ensure you that the configuration identified is correct for your inverter too. I also tested the writing features and it works perfectly.

Il giorno mar 28 mar 2023 alle ore 09:10 Pigi-102 @.***> ha scritto:

@kavejo https://github.com/kavejo No way the "sofar_hyd3k-6k-es.yaml" works in any way. It expose these 77 entities but it remains disconnected and unkown.

— Reply to this email directly, view it on GitHub https://github.com/StephanJoubert/home_assistant_solarman/issues/160#issuecomment-1486331587, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFMXQOBH7EHFCOUZSZS6Z53W6KFG5ANCNFSM6AAAAAATM77UGA . You are receiving this because you were mentioned.Message ID: @.***>

Pigi-102 commented 1 year ago

Hello, I started to create a sofar_g1hyd.yaml by removing lot ( if not all ) of "T" "R" and "S" entities. There are some that return a value also if are labeled with those letter. I would like to know if there is some paper that explain the meaning o some of this entities. I cannot find, for example a value that tell me how much power my PV are sending to the grid or others. I know it's a little off topic but maybe you can, as side note, help me in this.

here the file: sofar_g1hyd.yaml.gz

kavejo commented 1 year ago

@Pigi-102, you have to open a ticket with Zucchetti and ask them to send you the registers definition for your inverter model. That will tell exactly what you can get, at what address to read each entry, etc.

TommasoPino commented 1 year ago

Hello, I started to create a sofar_g1hyd.yaml by removing lot ( if not all ) of "T" "R" and "S" entities. There are some that return a value also if are labeled with those letter. I would like to know if there is some paper that explain the meaning o some of this entities. I cannot find, for example a value that tell me how much power my PV are sending to the grid or others. I know it's a little off topic but maybe you can, as side note, help me in this.

here the file: sofar_g1hyd.yaml.gz

Hi @Pigi-102, I will share with you the file that i found surfing the web. Use it carrefully because also the installer writing addresses are mapped. Please consider to use only the EndUser registers. The SpreadSheet is in Chinese, on the third sheet there is the entire map.

Link

In order to correctly map the 1Ph respect to 3Ph you do not have to remove all reference at T, R ans S phase because in that way the information you want will be lost. Consider instead to remove all reference to T and S phases and rename the R information removing the _R. This will produece a configuration file close to the final one, the only thing to add will be to remove the addresses ask to the modbus but it is something that could be done later.

Hope to give you the information searched. I hope also to find the time needed to share with all of you the inverter control capability I told you before. This just a screen :)

image image

Pigi-102 commented 1 year ago

Thanks @TommasoPino . I will look into it and hope to be able to do something. My approach has been to remove lot of Reference with "Unkown" as result and the three "T" "R" and "S" if the value returned was zero or unknown and there was a "Total" with a value insted. For example, ActivePowerLoad[RST] IIRC where at 0, but ActivePower_Load_Total had a (valid) value, confirmed with the value read from the app. In that case I removed the three and left only the Total. Current_Output_R instead had a value > 0 and I decided to leave him in yaml. Same goes for Current_PCC_R, Voltage_Phase_R and eventually other with a value.

Just to avoid working on an 3ph outdated, you advise to use the latest from main branch or one from a determined branch ?

paqpal commented 1 year ago

Hi, I have a ZCS hyd6000 and wifi stick LSW3_15_FFFF_1.0.78 A year ago I wrote a custom yaml trying to map as much as I can

Here is the file i posted here on github

https://github.com/StephanJoubert/home_assistant_solarman/issues/45#issuecomment-1121059303

I think it was embedded in this project. It worked perfectly until 26 April 2023 at 10:33.

Right now logs are:

Error doing job: Task exception was never retrieved
Traceback (most recent call last):
  File "/config/custom_components/solarman/__init__.py", line 35, in update_listener
    hass.data[DOMAIN][entry.entry_id].config(entry)
KeyError: 'solarman'

and

Updating solarman sensor took longer than the scheduled update interval 0:00:30

Update of sensor.solarman_pv_instant_generated_pw is taking over 10 seconds

last 

Logger: custom_components.solarman.solarman
Source: custom_components/solarman/solarman.py:173
Integration: Solarman ([documentation](https://github.com/StephanJoubert/home_assistant_solarman/blob/main/README.md), [issues](https://github.com/StephanJoubert/home_assistant_solarman/issues))
First occurred: 20:02:15 (1 occurrences)
Last logged: 20:02:15

Querying registers [512 - 597] failed, aborting.

That day I installed new Ring Intercom, nothing more. My inverter is under firewall only on local lan. I tried my custom yaml and that one provided by addon.

picardi21 commented 1 year ago

lema per permettere a tutti di risolvere questo problema... grazie alla condivisione delle informazioni tra te e ZCS

ma dove trovi il file

le definizioni dell'inverter ho visto che sofar_g3hyd.yaml corrisp

but can you see the instantaneous production of photovoltaics??

picardi21 commented 1 year ago

i, sono stato in grado di integrare l'inverter in HA utilizzando l'ultima versione dell'estensione Solarman. Devi riscaricare l'estensione utilizzando l'ultima versione disponibile. È necessario abilitare "versioni beta" e quindi selezionare "principale". Ha funzionato per me. Spero che questo ti aiuti

ma dove si trova il file da aggiungere nella cartella?

giuliovialetto commented 8 months ago

Hello, I started to create a sofar_g1hyd.yaml by removing lot ( if not all ) of "T" "R" and "S" entities. There are some that return a value also if are labeled with those letter. I would like to know if there is some paper that explain the meaning o some of this entities. I cannot find, for example a value that tell me how much power my PV are sending to the grid or others. I know it's a little off topic but maybe you can, as side note, help me in this. here the file: sofar_g1hyd.yaml.gz

Hi @Pigi-102, I will share with you the file that i found surfing the web. Use it carrefully because also the installer writing addresses are mapped. Please consider to use only the EndUser registers. The SpreadSheet is in Chinese, on the third sheet there is the entire map.

Link

In order to correctly map the 1Ph respect to 3Ph you do not have to remove all reference at T, R ans S phase because in that way the information you want will be lost. Consider instead to remove all reference to T and S phases and rename the R information removing the _R. This will produece a configuration file close to the final one, the only thing to add will be to remove the addresses ask to the modbus but it is something that could be done later.

Hope to give you the information searched. I hope also to find the time needed to share with all of you the inverter control capability I told you before. This just a screen :)

image image

Hi @TommasoPino is this available to manage inverter from HomeAssistant?

TommasoPino commented 7 months ago

Hello, I started to create a sofar_g1hyd.yaml by removing lot ( if not all ) of "T" "R" and "S" entities. There are some that return a value also if are labeled with those letter. I would like to know if there is some paper that explain the meaning o some of this entities. I cannot find, for example a value that tell me how much power my PV are sending to the grid or others. I know it's a little off topic but maybe you can, as side note, help me in this. here the file: sofar_g1hyd.yaml.gz

Hi @Pigi-102, I will share with you the file that i found surfing the web. Use it carrefully because also the installer writing addresses are mapped. Please consider to use only the EndUser registers. The SpreadSheet is in Chinese, on the third sheet there is the entire map. Link In order to correctly map the 1Ph respect to 3Ph you do not have to remove all reference at T, R ans S phase because in that way the information you want will be lost. Consider instead to remove all reference to T and S phases and rename the R information removing the _R. This will produece a configuration file close to the final one, the only thing to add will be to remove the addresses ask to the modbus but it is something that could be done later. Hope to give you the information searched. I hope also to find the time needed to share with all of you the inverter control capability I told you before. This just a screen :) image image

Hi @TommasoPino is this available to manage inverter from HomeAssistant?

Hello @giuliovialetto, everyone,

I finally had time to fork this repo and apply what I made. The following is the repo where at the moment I had control of "Inverter Storage Mode" and recently I added also a button to trigger the scan on the IV curve to find a better working point. I need to add this because the secondary PV string did not work properly (now the problem seems to be solved with an automation that presses the button every 30 minutes)

https://github.com/TommasoPino/home_assistant_solarman_w_control

I hope someone else could help me to continue the activity.

Have a good time everyone, Tommaso