Running Status "Fault" all the time with deye_2mppt.yaml

[SmoothMC]

Hey,

I used the deye_2mppt.yaml at the moment but with deye_4mppt.yaml it is the same

Inverter: DEYE SUN1000G3 Firmware: MW3_16U_5406_1.53

With those definitions, the "Running Status" is "Fault" all the Time. In the WebUI from the DEYE itself there is no issue displayed.

Maybe there is some mismatch in the yaml? I don't know. Is there anyone else with the same Display issue?

• group: Inverter items:
  • name: "Running Status" class: "" state_class: "" uom: "" scale: 1 rule: 1 registers: [0x003B] isstr: true lookup:
    • key: 0 value: "Stand-by"
    • key: 1 value: "Self-check"
    • key: 2 value: "Normal"
    • key: 3 value: "Warning"
    • key: 4 value: "Fault" icon: 'mdi:home-lightning-bolt'

Thx for your work and help

[Ulfmerbold2000]

Same here with the SUN600 Version Registervalue is at 4 all the time

Inverter is without Cloudconnection, internal Wlan Only, AP is off

[PV-Joe]

The “Running Status” entity is missing for the Deye Hybrid inverter:

Deye 8K Hybrid: Solarman Running Status is missing after updating from 1.4.1 to 1.4.3 #261

[Ulfmerbold2000]

The Entity “Running Status” is there and working (with deye_2mppt.yaml) at actual Mainversion 1.4.3(i had to install "main" in HACS, not the 1.4.3 to got it working)

Here its value is 4 (Fault)...the inverter works well Maybe an "Cloud-Offline" Alert? Directly connected onto my Deye, there is NO Fault noted (with NO Alerts too)

[DHLF]

Deye-2mppt.yaml (deye Sun600G3EU) Version 22.02.2023 The "older" Version did not show any fault, but now state is shown as fault all the time.

Comparing to the deye_4mppt.yaml running "on" a deye SUN 2000 G3 EU there is no problem as "normal" is shown as state. Both deyes are not in the cloud but locked in the local net.

Either the Sun600 is damaged(but there is no error code shown) or both devices are different somehow.

[vordenken]

Get the same message on my sun600g3eu, no cloud, addon version 1.4.1

[ChristophCaina]

Hi, I've just installed SolarMan with an SUN800G3EU - "main" branch and 2mppt.yaml. Also, the running state is FAULT - but the inverster seems to be running just as expected.

[b-reich]

Mine SUN-M80G3-EU - main branch and 2mppt.yaml also reporting "fault"

It can talk to the cloud (at the moment)

[G0ldmember]

I have the same issue with an Deye M60, but I don't think it is a YAML problem, as the Solarman web site also shows that error in the "running state" section of the inverter. So the interpretation is correct, still I'm wondering what error this is.